An excellent video. I hadn't used my Chevy for three months and the generator light was staying on. I cleaned the points in the regulator. It all works again.
@david9783
2 жыл бұрын
Here I am 6 years after this posting and have learned about my 1971 Cub Cadet regulator. Thank you, and Merry Christmas from South Carolina!
@ZippoVarga
2 жыл бұрын
You're very welcome David! Merry Christmas! Zip~
@Michael-st1hl
Жыл бұрын
Great to the point explanation of troubleshooting these issues with regulators. Clear and precise. So glad you kept your X on hold for this video…Subscribed!
@atractorkid7
3 жыл бұрын
Awesome 👍 I'll definitely keep this in mind when I start working on some winter projects. Thanks for sharing the info and detailed video, great work!
@leviridge3307
3 жыл бұрын
working old cars is what i love and this is great information,,thanks
@ZippoVarga
3 жыл бұрын
You bet
@JasonBurt-dj3bt
8 ай бұрын
This was exactly what my 1958 Lincoln Premiere needed! Thanks!
@FelixFelixB
8 жыл бұрын
found this video to late, I bought a new regulator but after taking off my old one the video explained exactly what I needed to do, im more of a visual learner I read only about cleaning the points but couldn't comprehend it due to this being all new to me , thanks, hopefully after following your steps I have a back up.
@ZippoVarga
8 жыл бұрын
+FelixFelixB I hope that it's just the points contacts as well! Although you found the video after the fact, you did find it. Thanks for stopping by! Cheers!! Zip~
@ericrichards5862
3 жыл бұрын
Just purchased a Ferguson TE20 tractor and the battery is hooked up neg ground when it's supposed to be pos. gnd. and it has battery charging issues, this has video helped me in troubleshooting. I'm going to check the field flashing videos also because it's been since the early 70's since I have done that. Thanks for the video.
@kibertkibert
7 жыл бұрын
Great video. Very well done and good for novices like me.... and my 1950 Hudson. We both thank you.
@ZippoVarga
7 жыл бұрын
I hope it gets you and your Hudson all Charged Up!! Cheers! Zip~
@Thatdude405
6 жыл бұрын
Your video was very helpful I'm changing the the voltage regulator on a Toyota Camry and I needed to know how to polarize it. Thanks for your input sir very helpful.
@johntruitt404
2 жыл бұрын
Flew my 67 airplane today and by end of flight, my battery was dead! I always have cleaned the wire connection points but never the relay points. After watching your video, I'm sure this is my problem. Thanks for the video!
@ZippoVarga
2 жыл бұрын
I hope this resolves your issue!! Zip~
@tigmantom6989
7 жыл бұрын
Can't Thank you enough for your very helpful and informative videos. They have saved me many times working on the old Allis. :D
@ZippoVarga
7 жыл бұрын
That's awesome to hear TIG Man!! That's the whole reason why I do them. Helping my fellow collectors and tinkerers! Cheers! Zip~
@Antiquetractorsetc
3 жыл бұрын
You explain these things very clearly.
@loudford8561
7 жыл бұрын
thank you for your videos iam just getting into old tractors and your videos have been very helpful
@ZippoVarga
7 жыл бұрын
That's why I post them Abe. Glad they're coming in handy! Zip~
@michaelamido7900
Жыл бұрын
Great video, installed new regulator wouldn’t charge polarized then worked great thank you
@rickj2913
5 жыл бұрын
You videos have been an inspiration to many people . keep it up Bro .
@ericclark8258
3 жыл бұрын
Thankyou Zippo for your info and instilled confidence.
@matxavier5
7 жыл бұрын
Thanks for this video. My old Honda CB550 wasn't charging and I still have the old charging system wired up. I followed the steps of sanding the terminals on the regulator but I didn't re-polarize the terminals and it started charging again. Before the lights used to dim and when I revved the rpms the light would get brighter. It does that again now and charges at around 14.2 vDC which is much better than before. It wouldn't hardly charge when at high rpm.
@ZippoVarga
7 жыл бұрын
The general operation of a Regulator is the same across the board for the most part. I'm glad you got the old CB550 charging again! Cheers! Zip~
@sd90mac8
2 жыл бұрын
Excellent Video, very informative, I will do this on my old 1958 FORD I put a new voltage regulator, and a new generator, back in 2005, n now it needs some tlc because it's now not charging, so I'll do this before I buy a new regulator and a new generator, thank you for your help,👌✌️👍.
@HenryMawcat
Жыл бұрын
tried it, it works, sorted the charging on my ironhead, clear simple instruction, many thanks
@stanlarose2317
3 жыл бұрын
I'm a dealer tech, currently working on a 1954 cadillac that won't charge after getting a new regulator and generator re build. Your tip to set the polarity on the regulator got it charging, I had no idea that was a thing, thank you.
@ZippoVarga
3 жыл бұрын
You're very welcome! Old technology, but it's like flashing a new computer to a modern vehicle to get the lines of communication going, only you're just pairing the charging system here. You have to excite the Regulator so that it knows it's time to do its job. I'm glad the video helped! Cheers! Zip~
@guardinoinc.7490
Жыл бұрын
You work at a dealership and don’t know the basics…ahhh no surprise
@stanlarose2317
Жыл бұрын
@@guardinoinc.7490 lmao humble yourself. They havnt taught this technology in school for decades. I doubt ill ever have the chance to work on something like this ever again. I guarantee theres a lot of stuff i fix that would make your head spin. Or who knows, maybe you are the one person in the world that knows everything.
@guardinoinc.7490
Жыл бұрын
@@stanlarose2317 don’t be offended Stan .. there’s more money in working on newer technology/cars that there is on older. Just due to amount of newer vehicles out there. But in basic autoshop classes they do touch on the foundations of generators and charging systems
@Prowlerook
6 жыл бұрын
I am pretty smart..hands on...you are one smart cookie and I hope you continue teaching..your methods are very well explained, I had a great time sipping vodka and getting a lesson on regulators..yes at 60 I am still learning. THANK YOU
@ZippoVarga
6 жыл бұрын
Soil. I'm humbled by your comment and compliment to my style of helping to educate through the wonders of the Internet. I had great teachers and I like to think it's their style and form of educating that I've adopted. Thank you Soil! Cheers! Zip~
@kinnaird100
4 жыл бұрын
Thank you my bike wasn't charging your video was a great help followed your instructions problem cured.
@ZippoVarga
4 жыл бұрын
Great to hear!
@rickj2913
5 жыл бұрын
You are a smart man like me . Like your videos . I love Simplicity and AC tractors as well .
@Swampwild1
4 жыл бұрын
Thanks very helpful. I want to add a few details. Start by running machine then pull off negative terminal. If it stalls it’s regulator or generator. You can try this cleaning but don’t get your hopes up. It can look pristine and be dead. These points are very sensitive unlike distributor. Requires a spoon or ruffled file. 800 grit didn’t work for me. Part is $25 EBay. Test generator by activating from battery.
@straightpipec6099
5 жыл бұрын
Thanks for the help Zippo. Glad you made this video.
@ZippoVarga
4 жыл бұрын
You bet Sir Pipe!!
@chrislaubenheimer6805
7 ай бұрын
Very helpful. Love your videos! Thanks Zippo!!!
@kylemichaels3373
7 ай бұрын
Thanks to this video I was able to get my 1969 MTD 860 charging again.
@johnvanover6285
Жыл бұрын
Like your work. I'm currently put one of these regulators on my Harley. Your were a big help thank you. Nice work
@ZippoVarga
Жыл бұрын
You bet John! Good luck! Zip~
@olegs79
7 жыл бұрын
"First ex wife chatting on phone, she's gonna have to wait a minute". Pure gold.
@ZippoVarga
7 жыл бұрын
lol...Yep....I'm still friends with my two X's and it's hard for their current spouses to understand how that's possible. I simply tell them, we divorced because we weren't a compatible couple, not because we weren't friends. Cheers!! Glad you enjoyed that lol. Zip~
@mr.cryptobull1520
4 жыл бұрын
My 1948 Harley Hummer 125 and I THANK YOU!
@1968hambone
9 жыл бұрын
very good info Zip....trouble-shooting and money saver brother!
@rot_studios
2 ай бұрын
Couldn't find any info like you just gave anywhere! Hopefully this helps me get my Piaggio Vespacar P2 going again, it's also got a starter/generator and a very similar regulator :D Thanks for making this video!
@johnshippen
6 жыл бұрын
Thanks so much,, Was very helpful. Johnny
@AlvinHensley
Жыл бұрын
Thanks it makes sense to me can't wait to try it!
@The5upermann1
9 жыл бұрын
Excellent video!
@bigDbigDbigD
3 жыл бұрын
An outstanding video Zippo. thx
@rohanboswell5408
3 жыл бұрын
Contact breaker points , haven't herd those old familiar words in decades
@ZippoVarga
3 жыл бұрын
We're a dying breed, that's for sure. This old technology just works and is easy to maintain. Cheers Rohan! Thanks for stopping by! Zip~
@DanielMeyer-ls5ph
5 ай бұрын
Thanks for the informative video!!
@user-qy3jx4qs6c
11 ай бұрын
That's for sure you have done great job
@toddlfrank
9 жыл бұрын
Thanks for the info. Good video
@watchrepairing
7 жыл бұрын
A sign of a good full life, "That's my second ex wife." Love it! Thanks for the video.
@phillipbonner5215
4 жыл бұрын
That was great the best thank you very much.
@dannygagne3241
11 ай бұрын
By the way ,thanks for the great expanitory video on voltage regulator troubleshooting.
@heliarche
9 жыл бұрын
My Scout has one of these big box type of guys. Maybe not the exact same thing but it's an air gap regulator(?). I wasn't charging one day and I gave it a bit of a knock with my knuckle and it started charging again. It's been fine since but I'm going to take it out and see if I can do something similar to what you've done. Ya know, the solid state stuff is supposed to be more reliable, but once it goes, it's done unless you're an electronics wizard and you *have* to fix it. These guys, if it goes, you have a decent chance to get it working again. I've been stuck in the woods with no sandpaper but I managed to get just enough crud off the points to get it home with a matchbook striker.
@ZippoVarga
9 жыл бұрын
Matchbook Striker!! Now THAT is the epitome of the term "Necessity is the Mother of Invention"!! Bravo on that one....learned something new! I can't count how many I've brought back to life with this simple little trick. Sure does save the ole wallet! Cheers my good Friend! Zip~
@JK-nw8hz
3 жыл бұрын
Thanks very nicely explains If the marking on the wire connecting terminal like Bat field Arm is also explains The confusion of right wire on The right terminal doubt is clear.
@jajaid6
9 жыл бұрын
so it has to be polarized everytime you swap out a battery?thanks for your videos!
@georgensonraffaut3726
2 жыл бұрын
Great video guys cheers
@59chevt
9 жыл бұрын
great explanation \, you make things easy to understand.
@ZippoVarga
9 жыл бұрын
Thanks 59!! I do my best to explain things without all the technical jargon.
@jassmandidgeridoo
Жыл бұрын
You just saved me a wack of money thankyou.
@jajaid6
8 жыл бұрын
does this have to be polarized everytime i swap out batterys?have a regulator that reads high and wondering if previous owner did not do this step.let me know please?thanks for your time.
@929rrdan
3 жыл бұрын
Thanks for the info I've been trying to find this these other guys all say the same thing that the generator is bad i want to test the regulator
@lopezjoseph6084
5 жыл бұрын
Thanks for the tip
@derrickmazur3703
6 ай бұрын
Thank you, sir !
@Mcfreddo
8 ай бұрын
What I am looking for is an explanation upon how it works. One set of contacts break (cutoff) the connection for the field? the other two will regulate the voltage and one for the current. Which coil function starts off closed; for the field windings? On our old tractor, the regulator does not work the starter. The starter has it's own solenoid and will start directly with the key, from a charged battery. (Massey Ferguson, English made.) The regular just controls the generator and so I was interested in getting the regulator to function again. I've cleaned up the generator and found it in fine condition, just oil fumes had collected and so was mucky, but from that, it had no wear on the armature, nor on the brushes as they were seized from wearing along with the commutator. Did not realise about the shocking to polarise the coil's iron core permanently- so to speak, as the contact/ coil system don't do anything atm.
@user-xi2rp5jq3x
2 жыл бұрын
This has been a helpfuly video for me considering this is my first go with this old of equipment, one questing i do have pertains to what looks like a plastic insulator on the back of the regulator under all the riveted areas, if its cracked will that cause issues
@rickj2913
5 жыл бұрын
Need to show you my AC B10 and my AC 716H too . Old school stuff that works .
@Syntheticoilprotection
3 жыл бұрын
Great content thanks for the info☕😃
@ZippoVarga
3 жыл бұрын
No problem 👍
@LawnGardenFun
9 жыл бұрын
Excellent info.
@rohanboswell5408
3 жыл бұрын
I used limilar ones on the 1970ies ford Corrina/angler/escort/ and triumph so many old British car Austin Morris /Cambridge westminster.we used to bend them to adjust voltage flow
@ZippoVarga
3 жыл бұрын
Some are fixed and some have tuning screws to increase or decrease spring tension. The former are a bit trickier to get dialed in, but once there, they'll last and last. Thanks again for stopping by Rohan! Zip~
@rdmanone
9 жыл бұрын
Good information. Thanks for sharing.
@EVILDR235
5 жыл бұрын
VERY HELPFUL VIDEO.
@ZippoVarga
5 жыл бұрын
I'm glad you found it helpful Chuck! Zip~
@GetBoned0
4 жыл бұрын
Came for some knowledge about a voltage regulator, explained very well and simple. Hope my cub cadets voltage regulator Is still good
@ZippoVarga
4 жыл бұрын
I'm glad this video helped out Andrew and I hope your Regulator is healthy. Cheers! Zip~
@honey8784
4 жыл бұрын
Thank you it helped me..
@ZippoVarga
4 жыл бұрын
Thank you for editing your initial comment Ken. To haste is to fall short. In other words....Yes, I could have spent less time explaining the intricacies, but that would leave you or someone else without that crucial piece of information. Cheers! Zip~
@not2fast4u2c
4 жыл бұрын
been here and watched this one too
@davesaam4308
4 жыл бұрын
Great video
@ZippoVarga
4 жыл бұрын
Thanks Dave! I hope it's helpful. Zip~
@amg9856
7 жыл бұрын
typically 14.5 vdc is good charge. once you start reaching 15vdc you are overcharging and over heating the battery.
@ZippoVarga
7 жыл бұрын
Correct Andrew. I typically shoot for a max of 14.2 to allow for +/- .3 volts, but from the factory, they're set to 14.4v. Thanks for stopping by and for the information! Cheers! Zip~
@michaelkatruska1248
2 жыл бұрын
Question I have a allis chalmers Hd6g high lift I took the generator off and cleaned all the inside out (caked with mud) and put all back together the brushes are making contact with commutator, I then cleaned points on regulator, but when I put voltmeter on generator and got a negative reading from battery terminal on generator. Would polarizing the generator wrong make it draw instead of charging?
@paulg444
3 жыл бұрын
unless you are running your tractor for more than a few hours per day you dont need a current limit circuit. When these tractors were used back in the 1960s and guys were driving them 5 hours per day you had to limit the battery charge. Today most users are using their tractor once per week or less. The last thing you have to worry about is over charging your battery. A simple bridge rectifier is all you need.
@llamamanism
2 жыл бұрын
That’s a really good ‘point’ hardly any vintage machine owner will use it like the first owner did when it was new Mine has 2 coils, one with a moving contact between 2 others that has just a few turns of copper wire in the coil and another with just 2 contacts and a fully wound coil. I wonder which one is the current limit circuit?
@rogertaylor8615
Жыл бұрын
Thanks for the info
@davidk6271
4 жыл бұрын
Video looks good , thanks - my battery has stopped charging so I will give this a go. Cheers
@ZippoVarga
4 жыл бұрын
Good luck with diagnosing your charging issue David. Zip~
@johnpalma7265
6 ай бұрын
When polarizing do you mean take the positive terminmal from the battery and simultaneusly contact the first 2 terminals on the Regulator?
@georgewilliams6657
6 жыл бұрын
Mint video man
@ZippoVarga
6 жыл бұрын
Thanks George! Glad you approve. Zip~
@Roboticdoughbull3k
5 жыл бұрын
Hey ZippoVarga , Every time I have to touch the battery and generator posts on the regulator, I pop the fuse in the tractor. Basically it's inline with the battery to regulator and charge indicator gauge.. Is the probably supposed to happen? And or I don't need that fused?
@ZippoVarga
5 жыл бұрын
Bypass the fuse temporarily with a jump wire. Then reinstall the fuse. Zip~
@dutch385
5 жыл бұрын
ZippoVarga,, This application is for my 67' Harley but has the same Reg,,, I just replaced the Generator w/ a new one as well as a new Regulator.... I was have low charging issues before,, now however I'm charging at over 15!,,, I'm scared I'm going to fry my Batt... I have flashed the Batt to the Arm but still charging high,,, my Regulator is a newer style & doesn't have the adjustments like this old one in in the video does... do you recommend bending the tab that has the spring tension to the batt terminal/coil ? - or any other advise?
@ZippoVarga
5 жыл бұрын
Very good question Dale with a pretty strait forward answer. First of....Awesome Bike! (Although I haven't seen it, I love the older Harley's.) Now...to be on the safe side, I would find a reputable automotive electrician to make the needed adjustments. But....you can attempt to tweak the springs to better regulate the max voltage. Optimum is 14.4V, so you're not TOOOOO high at 15V and I don't see you boiling out the battery unless the regulator isn't engaging the shunt to bypass charging once the battery is at full voltage. That would definitely be a bad thing. I would fully charge the battery, then start the bike and make certain that the regulator is indeed bypassing. Also, I can only assume this is the charging voltage at idle.....check voltage with some RPM's on the engine. Adding an AMP meter would also benefit you in the long run. It would allow you to visually check your charge/discharge at any given time. Smith Warner would be a period correct gauge to install and bonus....you can see, at a glance, when the regulator is charging and when it isn't simply by the needle position. Like on my old garden tractors, I don't run them often, so when I do start them up, I watch the Amp meter and will let the engines run until the Amp meter drops off to the nominal battery voltage. This is how you can determine if your charging system (a.k.a. Regulator) is functioning as it should. You can also use your voltage tester in the AMP function to determine if the regulator is bypassing as it should once the battery is charged or by simply putting the volt meter on volts and connecting it to the battery and watching for the voltage to drop off from the 15 or so volts. Honestly, I wouldn't stress the 15V threshold too much so long as the regulator is cutting off as it should. Like I said earlier....14.4V is the standard charge rate and you're only .6 volts over that. Now....if you told me you were charging in excess of 20 volts, then yes...I'd throw up a red flag. I hope this helps! Please keep us posted on your findings. Cheers! Zip~
@skippyjones4195
2 жыл бұрын
Hey 👋Zippo thanks for sharing 👍
@ZippoVarga
2 жыл бұрын
No problem 👍
@SamSam-us2fh
3 жыл бұрын
Good job 👏🏻, how to bypass the 6 pin voltage regulator?
@user-tm8ch1hi6m
11 ай бұрын
I have a HB112 that was sitting for 10 years. I got it started but the regulator smokes. I cleaned the three points and polarized it per this great video but it still smokes. Also, the engine does not shut off when I turn off the ignition switch. Any ideas?
@josephharmon5925
8 жыл бұрын
?4U - The resistor underneath I have a regulator that has a broken one, is it possible i could replace/solder or otherwise repair it, if so with what? (by that I mean could I get a axial-lead resistor to replace it, if so at what OHM). If not, are there any other ways/type replacements I could buy.
@davidhenderson3400
Жыл бұрын
This is for the 3 coil type. You should make a video about the 2 coil type and the single coil type.
@michaelduggan4475
6 жыл бұрын
got an old 7016 and running fine until recently. Won't start, no spark. Can't find problem. Figure it's neutral safety or magneto? Possibly something else?
@fairlanephantom
2 жыл бұрын
Problem I have with my 12v system is that it's fine in park when the idle is higher, but in drive the voltage is borderline and the charge light comes on and runs like crap. It's never killed a battery and it'll always start the next day no problem. But let's say I take it for a ride, when I get it home the idle goes low and the charge light comes on. So I end up having to increase my idle just to make sure it doesn't give me trouble while in drive, but increasing your idle for that reason can lead to other issues. The contacts in my regulator were actually very clean. Does that sound like a polarizing issue or just a dirty/worn generator? I do take the battery out in the Winters. I know generators don't charge at low idle, but idle speed in drive in the handbook is 500 RPM and the light comes on even trying to set it at 650 RPM.
@frankdavidson9675
Жыл бұрын
the good part of voltage regulaters is you can toss them in the trash can and go with alternator i wire easy hook up i did this to my m37 it gives 28 volts dc for my 24 volt system
@kipblack7196
2 жыл бұрын
Hi Zippo, Kip here from PA. What causes the ammeter needle to dance back and forth? Thanks for the help with the head for my "Shoblower". Another great video
@ZippoVarga
2 жыл бұрын
Hi Kip, once your battery is fully charged, the Regulator shuts off power going to the battery. But, it does this in a sort of "Float" mode where it kicks in and out of charge rapidly. This causes the Ammeter to jump. There is nothing wrong with your charging system. It's completely normal. If you swapped out the Ammeter for a Voltmeter, you wouldn't see any needle dancing as it reacts much slower than an Ammeter because it's wired differently. Where the Ammeter is a pass through (in line) connection, the Voltmeter is not connected via pass through (in line). It is connected to - and + independently where the Ammeter is connected to + and+. Cheers! Zip~
@kipblack7196
2 жыл бұрын
Thanks again!
@ridingwiththereids
Жыл бұрын
Replaced the alt on my 69 Chevy due to it not charging. Now it over charging. So I replaced the regulator, same problem. It goes from 12v-16.6, and everywhere between while running, and the alt gets HOT. I'm curious if I got a bad "new" alternator I think converting to a GM 1 wire alternator is in my trucks near future.
@ZippoVarga
Жыл бұрын
With everything being made in China now days I'd lean towards a defective alternator. Whatever you purchase as a replacement, I always suggest getting a Lifetime Warranty. Zip~
@johnf6262
10 ай бұрын
My book gives the gap for top and bottom of both voltage and ampree coils from what I see here suppose to make contact no wonder mine does not charge, that and testing all these heavey windings could be challenging. One thing for sure if all three contacts are closed it should charge maximum.
@lloydsplace101
2 жыл бұрын
i will try this on my old Harley.
@MrDanoconnor
4 жыл бұрын
Very Good Video. Got a simple question, are ALL 12 Volt Reguators Interchangable? One off a Briggs to one off a Techumse? etc. or is there a difference.??? If so , what is the Difference??
@ZippoVarga
4 жыл бұрын
There are differences MrDan. It's within the poles and how they deliver and bypass the charging circuits. It's also dependent on the alternator or generator that is in need of any given charging system. Your defense is identifying the alternator or generator type and its required regulator. This can be done in a number of ways, but the most direct and strait forward is identifying the alternator or generator being used via model numbers. Then, do an internet search for that alternator or generator along with regulator in the search and you will be directed to comparable regulators. I've got 3 different starter/generator types and each requires its own specifically configured regulator to work properly. I hope this helps and good luck! Cheers! Zip~
@MrDanoconnor
4 жыл бұрын
@@ZippoVarga Thank You, Glad I asked. I have a a MF 10 tractor with a 10 hp Tecumseh, Genny Starter on it and the Regulator is bad, I have one from a Cub Cadet with a Genny Starter and thought all the Genny Starter ones would be the same ? Maybe Not??
@clydemarsh2648
Жыл бұрын
Thanks
@historybuff9276
4 жыл бұрын
Damn even after divorce they still try to keep a man out of his garage or mancave
@Mcfreddo
8 ай бұрын
Battery to the field coil you mean?
@dalegribble60
7 жыл бұрын
Well informed. One question....I didn't get a spark when I polarized it. Good or bad?
@ZippoVarga
7 жыл бұрын
Sometimes you won't. If you're getting a charge, then all is well. Zip~
@dalegribble60
7 жыл бұрын
I went through your procedures. Regulator looks newer to me. Very clean. I polarized it again and did get a spark this time. I still discharge so I'm off to the gennie next. Buts thanks again!
@dalegribble60
7 жыл бұрын
Ah crap....still no charge. Off to the gennie.
@jefferymeader8530
6 ай бұрын
Does this work on 6 volt systems positive grounds
@Solamia7
3 жыл бұрын
QUESTION: After all put back and started engine, I put multimeter on VR as you said. I got 13+ reading, and then the readings dropped real low (like below 8, and even a 1 something) and back up to 13s again. It kept repeating this. Is this normal or do I have another issue to address? Thank you so much for your help
@ZippoVarga
3 жыл бұрын
Perfectly Normal. This is the Regulator regulating voltage going to the battery. Zip~
@Solamia7
3 жыл бұрын
@@ZippoVarga Thanks SO much
@chrisrestifo7010
Жыл бұрын
Question regarding these regulators. I bought a spare one just to have on hand. They are both virtually identical. The old one has 3 resistors on the back. The spare has only 2. Are they interchangeable? Maybe a superseded part? Or is this just the wrong one? It's for a 1976 XLH Sportster.
@ZippoVarga
Жыл бұрын
I would confirm compatibility with your local Harley Dealer's Parts department to make sure. Regulators can be picky as well as Stater's and Alternator's. Some don't play well together. Zip~
@chrisrestifo7010
Жыл бұрын
@@ZippoVarga absolutely, I didn't want to install it and fry my wiring harness!!!!
@ZippoVarga
Жыл бұрын
@@chrisrestifo7010 Exactly Chris. Which is why when in doubt, ask the professionals who are familiar with your Sportster and know what parts work and what ones will sizzle the whole system.
@reyzapata9375
4 жыл бұрын
Question: I have a 1950 Chrysler Imperial which I I have to polarize the voltage regulator because It has a generator. But, Do I have to do the same with my 70 Chevy Impala Voltage Regulator If it runs off a Alternator.?.
@ZippoVarga
4 жыл бұрын
My recommendation is to install everything, check for charge and if no charge, then polarize the regulator and check again. Zip~
@reyzapata9375
4 жыл бұрын
Ok, Thanks.👍🏽
@abr.magallon2134
6 жыл бұрын
Hello, i have a 56 buick roadmaster. Car was sitting down for almost 20 years. Have a problem finally car is running but my battery keeps draining. If i drive my car runs fine but next day battery is dead. I clean my voltage regulator like you said, i follow all steps exactly like you said. I run my car and voltage regulator read on my multimeter 13.5 and battery above 12. Next day after work my battery was 10.55 and voltage regulator was 10.11 and my car start it but my battery numbers came down to 9.10 and voltage regulator went up to 11.20. I remove negative from my batter while was on and my car turn off. Should i buy a voltage regulator or my generator. Please need help. Thanks and great video especially how you explain step by step.
@ZippoVarga
6 жыл бұрын
The problem sounds more like what's called a parasitic draw. Google the problem, "draining battery" or "Parasitic Draw" and you'll find some very good articles and videos on how to check and trace this issue. Something else on the car is causing the battery to drain while not in use. It appears your generator/alternator and regulator are doing their job. Keep me posted on your progress Ab. Zip~
@walt4908
5 жыл бұрын
I do have a question, the car goes off? An old generator system should continue to run even with the battery removed if the generator is working. New cars since the 70's need the alternator in the "loop" but not a 56 Buick. The generator should be putting out at least 12. something volts to show it is working and able to over power the battery and charge it. Should be able to find KZitem ways to check generator and or regulator. But if you are getting voltage then you have a different problem.If electricity is going to ground somewhere you have a short. You sure there isn't a clock, or light or something on drawing down the battery. It is pretty big power loss if you see that kind of loss overnight. You sure the battery is OK. Did you do a hydrometer test? Start at the battery make sure all the cells show good, no dead cells. Then turn everything off including the key see if there is continuity across the two terminals of the battery. or even a spark when try to put them back on their terminals. You may need to remove the BATT wire from the battery or regulator to not have this energize the regulator. If you do get continuity or a spark you have to figure out what is doing it. With a full battery take one fuse out of the fuse box at a time. Look for continuity or that pesky spark. Take a picture first just in case you get lost. Keep looking for that light or clock or something taking the power out of the battery. If you run out of fuses you are really in trouble. Good luck
@RodBarn
7 жыл бұрын
Hello Zippo, i touched the left (copper) point on my regulator, than i heard a "click" and i saw it smoking (regulator installed, battery connected) is ther something burned through now? what is the left coil for? thanks for your help
@Solamia7
3 жыл бұрын
Did you get this figured out I’m curious about what was going on with that
@thetrainmaster1
Жыл бұрын
Once you've polarized it can it unpolarize itself over time? And or what can cause it to unpolarize?
@ZippoVarga
Жыл бұрын
I have experienced this a few times. Often it happens when a unit has sat for an extended period of time. Zip~
@41levergun
5 жыл бұрын
Is it the same steps for a 6 volt positive ground system on a ford 8n?
@ZippoVarga
5 жыл бұрын
You should research your 6v positive ground system for the proper process for mating the regulator to the alternator, but I would assume (not guarantee) the process would be the same. It's entirely possible that your regulator will need to be specific to your 8N (Meaning, a 6v + ground regulator) Cheers! Zip~
Пікірлер: 267