He is basically saying all magnet motor inventions till date is practically not possible, without even doing a practical, just theory. Make models and then say it's fake. I know the donkey n the carrot theory works, n I'll prove him one day practically in a live video
@paulculwell9062
6 ай бұрын
Let's build a model rocket using 4 long non conductive rods attached to the sides? At the end of two roads a mag square magnet is attached. A electronical switch on the control panel inside the rocket will turn the magnet off and on using a timing gear at exact intervals as the rods move forward past the front of the ship ( locks in) and the magnet is turned on; thus thrusting; or pulling the space rocket forward ( lock off) as the two rods come back to its original position as a second set of rods move forward, and repeats same pull maneuver ? To overcome the gravitational pull of the earth; the rods will be able to angle upward and downward ; thus keeping the ship up?........................... Later people may even come with the gravity burst beam; and the continuous burst will keep the ship moving forward.... Hello.
@gittelindbendixentved
6 ай бұрын
come on - you need to use ONE pointed magnet (the magnet should be less in one pole) so when it comes closer to the other magnet it is drawn to, the opposite pool will push it away again, thus creating a perpetual push and push away.
@willycallemamani
11 ай бұрын
my last coment on this subject, the magnet will lose their magnetic energy in the proportion of work produced, also if we need energy to make magnets to convert they energy in work................. i do prefer bateries
@yWild
11 ай бұрын
Hi Willy, thanks for your comment. Yes, the magnets will use the magnetic energy, but this will be an effect that takes very long. 🙂 thanks for watching.
@RexAnothership
3 ай бұрын
It takes decades to loose magnetism of Neo magnets (10% per decade) and its dew to domains slowly going out of alignment. It is easy to realign these domains in the same way the magnet was first magnetized, so they can produce energy indefinitely if properly maintained.
@CENREAPER-YT
11 ай бұрын
If you make it work on the same way as a solenoid engine, it'll work without any problems, just like solenoid engine
@yWild
11 ай бұрын
Hi Cen, thanks for your comment. If you have found a device which is working without any problems. It may be a fake. If there is no additional power inserted in the system, the movement will stop in a short period of time. 🙂 thanks for watching.
@CENREAPER-YT
11 ай бұрын
@@yWild saying that there is no additional power inserted into the system while talking about a permanent magnet based devices is literally saying that permanent magnets aren't real because they don't have a power source. The point of making a perpetual motion machine is to make a device that will be able to convert the type of energy it uses (magnet, spring) into a work, which is something that people don't seem to understand. If you take an electric motor for example you can see that you need just a couple of magnets and a clever way of positioning them to harvest the energy from them. Will it be an electric magnet or permanent magnet doesn't matter since either of them produce a magnetic field. I hope that you understand my point.
@MohamedArtimA
Ай бұрын
مسكين٢ المسكين١
@anilkumarsharma8901
11 ай бұрын
Use lubricant and it's become easier for sure 🤣😂😂😂🤣
@yWild
11 ай бұрын
Hi Anik, thanks for your comment. This time friction is not the most important topic 😉. Thx for watching
@haehnelconrado3099
4 ай бұрын
Dejan de gastar dinero y tiempo en diseños que no funcionan ni pueden funcionar. Para hacer un motor magnético primero tienen que encontrar un material que permita hacer que el flujo magnético pase en un sentido y ni en el otro, esto es un DIODO MAGNETICO. Usen todo su dinero, tiempo e imaginación en investigar este tema, el que lo logre ganará mucho dinero, fama y resolverá el problema de la energía para la humanidad.
@ranaji99
5 күн бұрын
What happens when you stand near a large magnet n turn on a magnetic switch in your hand, it will pull you with great force towards the large magnet, now he is saying you spend same force to turn off the switch when the switch is aatached to the large magnet. One cannot hold a small magnet from attracting towards a large one, it pulls you so bad you cannot stop it.
@anunnakielohim2727
9 күн бұрын
if it were mounted upside down would gravity make it more efficient?
@OrgathmTech
Жыл бұрын
Problem is the energy u need to crank the handle. Its more then you can win. Like in every machine of this kind. Its just impossible. Please dont feed the magnetic motor beleavers. Allmost all electric motors are based in magnets. So wie can call every magnetic motor a megnet motor. And we all know that this beasts are hungry
@yWild
Жыл бұрын
Hi Orgathm, thanks for your comment. I try to show why these devices are not able to work using my gravity model. Thx for watching 🙂
@roberthigbee3260
Жыл бұрын
Short answer - No, this isn’t perpetual motion and the fact that this guy didn’t build it proves that it won’t work. The energy to turn the “magnetic switch” plus the friction in the joints is greater than the propulsive power stroke.
@yWild
Жыл бұрын
Hi Robert, thanks for your comment. Yes it is not able to work. I describe the reason for it in this video. Thx for watching 🙂
@الدعوةالىالله-خ8م
27 күн бұрын
@@yWild ⚠ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠ Quran
@noah_4_25
11 ай бұрын
I also wanted to say that you really notice your effort in your video as you have just built something in real life, which I think is really cool, so please keep making informative videos like this. LG Noah
@noah_4_25
11 ай бұрын
and that's yours. Link the German channel in your channel info just like you linked your English channel in German. LG Noah
@yWild
11 ай бұрын
Hello Noah, thank you for your comment. I’m glad you like the video. I have already built similar devices without filming and always had the problem that they did not work for some inexplicable reason. If you have ever worked with neodymium magnets, then you have probably noticed that they are very difficult to work with. The repulsion and attraction makes the work challenging. Fine tuning is difficult. Simply because magnetic fields are invisible and the effects are difficult to estimate. That's what brought me to the gravity model. 😉 Just sometimes I will build up things in the real world. Thank you for Watching
@anilkumarsharma8901
11 ай бұрын
After how much time it's become failed due to its own heating 🤣🤣😂😂
@yWild
11 ай бұрын
Hi Anik, it’s immune against this scenario, because it does not even do the first step of running 🙂. Thx for watching
@omer-m5c8u
9 ай бұрын
dünyada mıknatısın yada mıknatısların kullanıldığı hiç bir araç yoktur ama ufolar uçan daireler bu projeyi kullanabilir
@XthenewyorkerX
Ай бұрын
Fake
@HunadiPaka-l8x
8 ай бұрын
I have an idea that applies the same concept of a magnetic barrier that requires less force to utilize,thus leaving the system with access force and perpetuation, I can't post it here for before I patent it but I can send it to you directly under conditions of non disclosure so that you can animate it and test it with your gravity model test. My innovation achieves permanent imbalance.
@kurtdobson
9 ай бұрын
Magnetism is always a field with a North and South pole. There is no such thing as a monopole magnet or a magnetic switch.
@alexandruvictor924
9 ай бұрын
Teoria ca teoria. Practica te omoara! Vezi daca energia necesara pentru rotirea magnetilor nu depaseste energia produsa! ...
@chaorrottai
10 ай бұрын
I lIke you, I like your videos: but this is not how you make a magswitch. You're missing like half the parts......
@yWild
10 ай бұрын
Hi Chaor, thx for your comment. Glad you like the videos. Really I haven’t got the principle right? I apologise if it is like you said. Actually I tried it out, as you can see in the video. If there are more hidden parts included, it is working without it even. 🤗 thx for watching
@jonasyulledesouzayulle3300
2 ай бұрын
Bom dia felicidade paz 🕊️🕊️🕊️🕊️🕊️ muito bom espetacular.
@АлександрЕршов-ь8б
9 ай бұрын
Молодец! Нужно изменить конструктив не много. Вместо железного поршня установить один из двух магнитов. Второй магнит сверху пусть так и вращается. Магниты не должны подходить вплотную, во избежания примагничивания.
@dinza218
9 ай бұрын
Law of conservation of energy: energy cannot be created or destroyed
@randallmacdonald4851
Жыл бұрын
Before I finish watching this video, I would tell you that I have two of these mag-switches (for my workshop) and turning the mag-switch on takes a bit if energy to turn. It takes more energy to turn it off. I'll say, here, that I don't think you have a perpetual magnetic motor. I think the total energy put into the system will not be enough to equal the total energy put out. I'll post a reply to myself once I finish the video. :)
@randallmacdonald4851
Жыл бұрын
Excellent graphics. Excellent experiment, too. This is the Scientific Method demonstrated well. Good going, sir!
@yWild
Жыл бұрын
Hi Randall, thanks for your comment. Great to hear someone with experience with the magnetic switches. Unfortunately it’s independent of which turn, on or off, has more force to invest because there are both very important 🙂. Thx for watching
@matthew2531
Жыл бұрын
Thank you for a very thoughtful comment. Let us measure the difference of energy for the on switch and off switch as a magnetic well or capacitance/inductance or similar to how a flywheel stores momentum...
@matthew2531
Жыл бұрын
@@yWildwhich units should we consider Ein - Eout = 0 Do you use Watts? Thank you for another great video.
@dalwinderssi4094
8 ай бұрын
this is another BS. Turning force of switch is no egaul to repelling force of magnet this is fail attempt.
@yWild
8 ай бұрын
Hi Dalwin, thx for your comment. You’re right, that’s the reason why I do these videos. To many people believe in these devices. Feel free to watch a bit further 🙂. Thx for watching
@eusoujeangodoy
11 ай бұрын
Muito interessante seu conteúdo, ótima explicação, mas no entanto me surge uma grande duvida, muito investimento para provar que uma teoria não funciona sendo que com a configuração correta ela funciona perfeitamente, não em modo perpétuo porque isso não existe na nossa dimensão temporal, entretanto em modo continuo por um longo período funciona perfeitamente, acredito que você sabe disso!
@yWild
11 ай бұрын
Hi Jean, thx for your comment. Yes, some machines may work for a while if they have a very low friction. But in this case the motor does not do a step after starting because of the inoperable principle. My topic are the perpetual motion motors and the people believing in them. Thx for watching 🙂
@gkiosseopoulos
8 ай бұрын
Hi schönes Video. Wenn die schaltbaren Magneten von einem kleinen Motor geschaltet werden, welcher Wirkungsgrad wäre möglich? Es wäre schade, wenn man daraus ein Perpetuum mobile machen will. Geht eh nicht. Aber der Wirkungsgrad kleiner 1,wäre interessant
@yWild
8 ай бұрын
Hi Gkio, thx for your comment. Der Aufwand die Magnete zu verdrehen ist recht hoch. Es bleibt eine Anwendung die reichlich Energie verzehrt. Thx for watching 🙂
@mattiask55
Жыл бұрын
Sweden calling.:) lovely to see a new well done animation. I think your model of showing magnet's energy flow is very good. Easy to understand why many free energy magnetic motors have difficulty working.. But there are more models that you set that would work if... you have a flywheel. The Otto engine would never work if you didn't have the kinetic energy stored to make the engine rotate... Why should everyone build a free energy motor without a flywheel??? Make over Do the right thing as we say in Sweden... looking forward to the next animation… would like to use your model to see energy flow with my magnetic motor.....:) do you work with Cad, or just a hobby? //Matthias
@yWild
Жыл бұрын
Hi Mattiask, glad to hear from you again. You are a big fan of fly wheels? Aren’t you? 😄 A flywheel by its self, it’s only a tool to give inertia a bigger influence and relatively reduce friction by adding mass. I like flywheels too, but for the use of perpetual motion machine, they are not very helpful, I fear. Thx for watching 🙂
@matthew2531
Жыл бұрын
@yWild he has an interesting point flywheels are necessary to store momentum and cycle steps in the combustion process The energy loss of a flywheel is measured with the heat released and forces down shaft. I think?
@sherbang7076
5 ай бұрын
ever heard of multiple cylinders ?
@yWild
4 ай бұрын
Hi, thx for your comment. There may be more than one, yes 😀. Do you have a special design in mind? Thx for watching 🙂
@JK-zl7vv
11 ай бұрын
I tried this design, it did not work, as the piston is coming up to the magnet its attraction and repulsion work against each other thus counter reacting any gain, and the magnets in the magnetic switch are hard to turn, much harder than any energy produced from the machine, so this machine does not work.
@yWild
11 ай бұрын
Hi JK, great to hear the confirmation of my own experimental experiences. Yes you are right, the power to invest is much more than the power output. Thx for watching 🙂
@1GOD-ALMIGHTY
11 ай бұрын
Newton's second law can help you. Do you know Newton's second law???
@yWild
11 ай бұрын
Hi World, thanks for your comment. If Newton’s laws would be respected, then all the people would not believe all this perpetual motion machine stuff in the Internet. But people are able to think out of these laws and are able to imagine that there is more. And because magnetic fields are invisible, I go the way to show them my gravity model. 🙂 thanks for watching.
@1GOD-ALMIGHTY
11 ай бұрын
@@yWild you did not understand!!! pay attention to Newton's second law 🤐 100 magnets with a force of 2 kilograms create a force on an inclined surface of 0.04 F=?
@OrgathmTech
Жыл бұрын
Btw... it seems u need a 3d printer 😂😅
@yWild
Жыл бұрын
Hi Orgathm, 😅 yes, you’re right I think.
@philippebertel1779
Жыл бұрын
Cette version je connais pas mais je posede une version différent pour produire là même chose de façon très efficace même une autre version encore
@bogganalseryd2324
10 ай бұрын
Like a Bosch
@yWild
10 ай бұрын
Hi Boggs, thanks for your comment. Indeed not 😄. Thx for watching
@bogganalseryd2324
10 ай бұрын
@@yWild I just tried to do a pun on the Bosch commercial we get here in Sweden 😀
@yWild
10 ай бұрын
Hi Boggs, I understood and we have got the same commercials 😄 I think. But the Bosch stuff is working for real 😉😄👍🏻
Пікірлер: 67