Furitek if you have any plastic head all in your truck you better switch it for you right now there's just so much low in for and then high speed I know in the fmx that it is insanely fast especially on 3s April do donut of on donut I'm sure if I didn't have the front in so weighted down that it would pop wheelies
@LARANUD
Жыл бұрын
Can you try the horizontal servo mount on it
@TheShopMiniRC
Жыл бұрын
Once I get another one I definitely will.
@gibsonlife573
Жыл бұрын
Metal Gear sets are not that easy to be found right now there's a quite a few of them on eBay but they're not the low speed I was looking for the 80 3 1 found 40 3 1 I believe that is how it ended up being or something like that
@axetogrindproductions4153
6 ай бұрын
he says still has the blue and the purple and the .....its still a rainbow lol
@TheShopMiniRC
6 ай бұрын
lmao...
@thudtrades1850
10 ай бұрын
You complain alot....
@TheShopMiniRC
10 ай бұрын
What am I complaining about? Lmao
@slomofan2070
Ай бұрын
That is a good video, thank you. Could you please give me Informations for the both Plastik Parts, which you mounted in front, for slashing about stones and the rear to high up the both upper links , thank you.
@TheShopMiniRC
Ай бұрын
I’m sure I mentioned it in the video but those are 3flow9 rc parts.
@gibsonlife573
Жыл бұрын
I think if we can put more tricked-out rides and people's hands and show him the things they can do it would be a lot more interesting the people will there be a lot more views on everybody's Channel
@TheShopMiniRC
Жыл бұрын
I like to show people that they too can do upgrades and builds.
@gibsonlife573
Жыл бұрын
I don't think there's no way in hell in that plastic transmission gears are going to hold up to that
@TheShopMiniRC
Жыл бұрын
I have other trucks with plastic gears and furitek systems (and other even faster motors) and they are holding fine so far. Make sure your mesh is good and don’t force throttle when clearly stuck.
@gibsonlife573
Жыл бұрын
That's why my don't hold up because I forced throttle when stuck it's like Matt from 2fmrc says I want to go where I want to go LOL but yes I do believe plastic years can hold up because I got the plastic little ring inside of the FMS transmission everything else is metal only the shifting Fork bring his plastic also another note if anybody's having trouble with the FMS FCX 24 Power Wagon transmission not wanting to shift after installing steel gears in the transmission I have found out that it is not the gear set it is the wire that is on the servo then shift the gear for you if it's straightened out at all it needs to have like a slight 45 in each end cuz I ended up finding mine to a complete 90 and it wouldn't work no matter how much I adjusted the servo trim it still wouldn't catch both gears
@gibsonlife573
Жыл бұрын
Mmm more of a common screw they probably got billions of them that's why sure they use them on more than one I know they do because I have the same stuff on the FMS
@TheShopMiniRC
Жыл бұрын
Likely.
@wowshadowsedge
28 күн бұрын
Super Bettle! Very cool, indeed. Would love to build one! Can't decide between all new specific parts or a donor trx4m... I tend to replace most everything anyway. Hey, great vid, thanks.
@TheShopMiniRC
27 күн бұрын
If you know what you want, a donor is a waste. :)
@TheShopMiniRC
27 күн бұрын
Oh and thanks for watchin!!
@JeepinMaxx
Жыл бұрын
Can you thread the shock mounts to 2.5mm? That way you could use the stock shock bolts with no need for nuts (or is the chassis too hard to thread with the new anodizing)
@TheShopMiniRC
Жыл бұрын
You might be able to rethread them. I was tempted to try and just force the stock screws in, but decided against it.
@joshadams2792
Жыл бұрын
Thanks .definitely going to order one .
@TheShopMiniRC
Жыл бұрын
It’s awesome.
@suemisslbeck7023
Жыл бұрын
Another great build Ken. Thanks for the tips, always learn from you.
@TheShopMiniRC
Жыл бұрын
Huge thanks for watchin!!
@paulgarcia8846
Жыл бұрын
Super Bettle! Great Vid!
@TheShopMiniRC
Жыл бұрын
Thanks a ton for watching. We are loving it.
@giopirmisashvili5514
7 ай бұрын
Thank you
@TheShopMiniRC
7 ай бұрын
You're welcome
@KBRC81
Жыл бұрын
I want to order one and just swap all the stock components but I've seen complaints about the stock ESC being a very tight fit and plugging the battery in can be a real pain. Idk, maybe de-casing it would help. That roof needs a hinge exactly for this reason. Edit : SUPER BETTLE!
@TheShopMiniRC
Жыл бұрын
I actually didn’t screw in the back 2 screws so that I can hinge it. The stock esc is pretty large and would probably do well to be decased. Edit: thanks for watching the whole video!!!!!
@rcjoe406
Жыл бұрын
Very cool
@TheShopMiniRC
Жыл бұрын
Indeed.
@marcinsochacki8707
Жыл бұрын
it is not more a TRX4m, it is more like a buggy. Is there any chance to see some leds on the roof or in bumpers? This Stinger will be dope with some leds inside of the engine. As always - good vid, great job thx:)
@TheShopMiniRC
Жыл бұрын
What makes a TRX4M? The body? I would definitely like to get some lights on it or some sort of front bumper. We will see over time how it evolves. Huge thanks for watching!
@Rc_Alex_76
Жыл бұрын
Always a detailed build very helpful thanks
@TheShopMiniRC
Жыл бұрын
Huge thanks for watchin!!!
@jimkrug2586
Жыл бұрын
Super Bettle!! I built up one of the ti Bettle chassis' and added some brass down low and 65mm pin comp tires and it will go almost anywhere I point it. Such a great rig!!
@TheShopMiniRC
Жыл бұрын
Sounds great! I def need to add some down low weight.
@crawlerballer
Жыл бұрын
Super bettle 🙃
@TheShopMiniRC
Жыл бұрын
Thanks for the watch!!!!!!
@andrewrichey7374
Жыл бұрын
Super Bette Looks pretty awesome Yep we was here watching
@TheShopMiniRC
Жыл бұрын
Thanks for coming!!!
@canders7133
Жыл бұрын
Super Bettle
@TheShopMiniRC
Жыл бұрын
Thanks a ton for watching!!!!!
@PA7Erwin
Жыл бұрын
Super Bettle
@TheShopMiniRC
Жыл бұрын
Thanks for watchin!
@kennethrobinson9008
Жыл бұрын
Great video! I would like to see a comparison with and without the anti-squat link riser.
@kennethrobinson9008
Жыл бұрын
Super Bettle!
@TheShopMiniRC
Жыл бұрын
If we ever get time. Sooo many projects.
@kennethrobinson9008
Жыл бұрын
@@TheShopMiniRC I hear you. Nice to have too many projects in this hobby.
Пікірлер: 52