This channel is filled with expertise! Thanks Ryan! Why you don’t have more subscribers is beyond me
@FabianPiperno
2 жыл бұрын
I have one of those pedal cars, they’re super cool! If you decide to widen those Fuchs I’ve used dog bowls in the past (on a cozy coupe). You can pop the centers in and use the bowl as a lip, or 3D print some BBS RS centers 🙂👍
@CrucibleCoachworks
2 жыл бұрын
Great idea!
@bounzig
Жыл бұрын
I used to work in a licensed Porsche workshop, I did bodywork. These guys are really good, I wish I knew how to shape metal like that! I think I found my new hobby :)
@troyd-motorsport9933
Жыл бұрын
Nice work!
@MyZxcvb12
Жыл бұрын
Thanks I like what your going I .learnt something today my first time here.
@1cstabach
Жыл бұрын
Great little video.
@dejweedz
2 жыл бұрын
Hi! You can make that little 911 your workshop demo car for advertisment :D just finish it up from all 4 sides and put some cool scale rims
@CrucibleCoachworks
2 жыл бұрын
Noted! 🤙🏻🤙🏻🤙🏻
@mercedes.c63_audi.q8
Жыл бұрын
Such an underrated channel... great info and content! You just gained a new subscriber. 👍
@stanislavzhelev8477
Жыл бұрын
Thank you, awesome video
@chaserwilliams1
Жыл бұрын
Very cool! Thanks for the tutorial!
@JonFukuda
2 жыл бұрын
Better than Saturday morning cartoons! Crucible weekend goodness thanks for the 101. I was wondering how far you’d get in one vid. What was the real-time on this build just to set expectations?
@CrucibleCoachworks
Жыл бұрын
Thanks Jon! This was an afternoon of work.
@joshacollins84
Жыл бұрын
👋 Hi! Yeah, I just wanted to say that your work is amazing and very interesting to watch happen. So thanks for your hard work, and sharing your art. Cheers.
@CrucibleCoachworks
Жыл бұрын
Hey! Thanks for the kind words! 🫶
@TheGuerillapatriot
Жыл бұрын
thanks, learned a lot. I really want to get into this.
@wilt778
Жыл бұрын
awesome work
@LukevonXDAngerous
Жыл бұрын
great content!! i love it
@danh.122
Жыл бұрын
Another great video! BTW - What diameter wire do you use?
@ayevee6619
Жыл бұрын
I did a wide body on ky car in a similar way, im super happy with the result other than its not that symetrical side to side. Im the only one that notices it but it is there 😥 Do you have any helpfull tips for keeping both sides symmetrical?
@GoldenSim27
Жыл бұрын
QUESTION !!! i always wanted to wide body my car , juste about 1'' to make cleaner fender edges and use wider wheels and lower the car a bunch, but what is stopping me is how do i hold the inner fender up in there ? factory it holds by the lip of the fender edge .. its a daily
@nylezfuller4746
3 ай бұрын
I have a question. What’s the purpose Of doing metal over fiberglass
@tptrsn
Жыл бұрын
Amazing video, thank you for this!! And you damn well know what RWB stands for, you big kidder! Lol
@CrucibleCoachworks
Жыл бұрын
( ͡° ͜ʖ ͡°)
@seymour86
Жыл бұрын
Awesome video! If you were hemming the wheel edge, would you be using the bead roller to do that?
@CrucibleCoachworks
Жыл бұрын
Correct! Bead roller to tip the flange, a stretch to allow it to lay flat, then hammer and dolly to finish it off.
@seymour86
Жыл бұрын
@@CrucibleCoachworks thank you sir!
@lueriver5474
Жыл бұрын
Man Luka Doncic is talented.
@iliketorockrock
2 жыл бұрын
Good vid 👍
@CrucibleCoachworks
2 жыл бұрын
Thank you! 🤙🏻
@aaronburratwood.6957
Жыл бұрын
11:55 Is that some odd tool or a unicycle in the background? So many questions…
@CrucibleCoachworks
Жыл бұрын
It’s a unicycle 😅 Arguably a tool tho. 😂
@aaronburratwood.6957
Жыл бұрын
@@CrucibleCoachworks Real nice work in all you do. I wish I learned metal craftsmanship earlier in my life.
@jamiebizness1
Жыл бұрын
Can you shrink it without the kick shrink
@dave_ecclectic
Жыл бұрын
I thought wide body was where the body was split down the middle and physically moved outward, a strip is added in this center gap, thus not requiring fender flares As opposed to... fender flares.
@vityaatamas8707
Жыл бұрын
Отличная работа, Бро.
@Shadowband72
Жыл бұрын
Replace the plastic fender flares on my Ford Ranger with actual metal ones 🤔
@downlowperformanceinc4860
Жыл бұрын
I also HATE plastic bolt on wide body. Check out my how too wide body classic beetle.
@thetruth7202
Жыл бұрын
I was hoping I can do this myself but don't have fancy machines like you 😕.. great video 👍
@wheezy7656
Жыл бұрын
just wish i had access to the tools 😭
@johnterpack3940
Жыл бұрын
Trying to find the testicular fortitude to put box flares on my Mustang. And the money, definitely money.
@crtxdistortion657
Жыл бұрын
Not a Duck-tile. It's a Mallard... Maybe a Mall-et-ard? Good vid though! 🙂
@renerostohar
8 ай бұрын
Mayby you have to polich your englishwheel wheels. They are mega durty. Your transvure it in your metal.
Пікірлер: 53