Man, don’t know how many times I’ve commented on your videos about tire pressure but you sure do love to run things with 30 psi in the tires. Drop your pressures and it will ride and climb much better.
@jammerlupardi8782
2 ай бұрын
That myth is for if you drive in sand……
@ThePatillac
2 ай бұрын
@@jammerlupardi8782 No it's not lol. It helps in snow, it helps on rocks as well.
@Beardest_Fishing
2 ай бұрын
@@jammerlupardi8782 Or if you don’t know what you’re talking about and try to sound like you do on KZitem…
@Beardest_Fishing
2 ай бұрын
@@ThePatillac Don’t argue with trolls. They bring you down to their ignorance level and try to beat you with experience.
@jacehardin7828
2 ай бұрын
@@jammerlupardi8782 I have never heard anything more wrong in my life
@mrshaneyt43
2 ай бұрын
So impressed. All I kept thinking was you built that single handed in your shed and look what it’s doing , so cool 👌
@ipoopmuffins
2 ай бұрын
i know youre saying that youre struggling to keep up with that rzr, but youre keeping up with it with a vehicle you made yourself from scratch. thats super impressive.
@Aarronching
2 ай бұрын
He’s a great example of built not bought 😂
@danielscarbrough4363
2 ай бұрын
The "Recluse" clutch would make it effortless...I love mine in the woods!
@TrudgeRC
2 ай бұрын
Came into the comments section to suggest the same.
@StroDshiesty1
2 ай бұрын
I dont think they make them For sport bike engines but i do know its possible
@johnmead1337
2 ай бұрын
Considering you built that 100% yourself it performed just as well as the purchased vehicles. Really proved what a brilliant job you did. You should be very proud of what you have created.
@mrgames1204
2 ай бұрын
honestly, this machine is way more capable than you think it is , but as much i hate to say it, you are too gentle on it, just give the bean man. much love
@drsnapid
2 ай бұрын
This. It's a busa motor. Dial up more rpm and let the tyres be the clutch!
@DirtRoadBoyz2
2 ай бұрын
Having some good friends help is always a giant plus!
@ThePatillac
2 ай бұрын
That thing handled those trails like a champ! Good job on the build.
@nothingtoseehere4026
2 ай бұрын
Nice to see you taking a break and enjoying the toys you built. Those locker controls turned out pretty cool. Articulation is really nice too.
@Blaquer17
2 ай бұрын
Don't forget, that motor makes the vast majority of its torque far above the RPM levels you were driving. It's a sport bike motor. once the clutch is engaged, you have to keep it above 6K rpm to make any significant torque. I know it sounds like it's screaming at 4000, but it's not even getting started!
@mattus1gig
2 ай бұрын
That things articulation is a sight to behold, beautiful 👍
@VWJawbreaker
2 ай бұрын
Awesome ride. Having minor issues while out testing is completely normal. Huge success in my book.
@quaileggsvermont
2 ай бұрын
Yep, looks like a mad max buggy! That's good! 👍🏻👍🏻
@draggonhedd
2 ай бұрын
you gotta not be afraid of revs, let it eat! anything under 4500 rpm is basically useless unless you're cruising, especially if your'e starting on a hill. This thing is cool as hell, you're stuff has gotten so good
@Davespackey
2 ай бұрын
That’s what gearing is for.. looks like it did pretty good to me.. he built this in his shed.. it went through everything a 30k+ machine did..
@videobyallen
2 ай бұрын
I thought that as well but i think hes trying to take it easy on the chains.
@steveww07
2 ай бұрын
@@Davespackey that razor isnt 30k dope
@Davespackey
2 ай бұрын
@@steveww07 the pro xps are actually more then 30k.. dunno what your talking about.
@xpndblhero5170
2 ай бұрын
I am extremely impressed by this machine, it's just crawling along every single obstacle fairly easily.... For being a home built machine this thing is a beast. Still wish I had you as a neighbor.... And yes, still a few houses away. 😂😂❤
@miketriesmotorsports6080
2 ай бұрын
What an adventure! Thanks for taking us along.
@psychosquidadventures
2 ай бұрын
Get a Recluse clutch for the motor, it's either manual or centrifugal clutch
@Chopped93VX
2 ай бұрын
I second that, if they make one for that model engine/trans. My only concern would be it holding up to the weight of the vehicle.
@psychosquidadventures
2 ай бұрын
@@Chopped93VX with the secondary transmission and always running either low or mid gear in it, it should hold just fine High gear is where he might have problems
@drxcustoms7967
2 ай бұрын
Impressed with this thing. That drive system is crazy complicated and it handled those gnarly trails well.
@jimsworthow531
2 ай бұрын
Awesome that you took that hand made one of a kind on such a torturous test. anyone with money can buy a machine for any purpose, but you built one by hand which probably 99% of people could not do. Please go easy on yourself; you make amazing one off machines; please take care of your creations because you have nothing to prove to anyone; take care of yourself.
@Keegan-111
2 ай бұрын
The TT handled amazing considering you built that from scratch. Next project, solid axel front and rear, like a proper ultra 4 rig, try and base it off of Matt Karriker's old Ultra4 truck that he nick named Nightmare.
@BCDriven
2 ай бұрын
Just a small driving tip from a Windrock regular, those ruts are all over the park. You've got all that suspension and you need to use it. Roll into those things with some momentum. Also buy a sheet of 3/8" UHMW and make you a skid plate, it'll help you out a ton.
@minezyo7335
2 ай бұрын
When you are running trails that technical bud, LEAVE YOUR LOCKERS AND HUBS LOCKED IN AT ALL TIMES... Also, air down and buy some boots man.😊
@ExoPhaz
2 ай бұрын
he said in another comment he had 8psi front and 10 psi rear
@throwawaypt2throwawaypt2-xp8nx
2 ай бұрын
I concur on the boots, preferably muck boots
@jasonhudson5861
2 ай бұрын
@@throwawaypt2throwawaypt2-xp8nxmuck boots are for duck hunters:/
@Wayne70
2 ай бұрын
Get fishing waders style and your butt will stay dry too lol
@DetroitMicroSound
2 ай бұрын
If you can make your rally/raid buggy do all this without any major breakdowns, you can run it in Dakar. Better get ready to do endless miles of straight open desert, at top gear, with this kind of tough incline stuff appearing at spots all along the course . . Oh, and ya need a co-driver..a roof, windshield, (snap out?) side windows... 😁👍
@Wayne70
2 ай бұрын
I love watching you build and test your projects, for me this was a little bit long to watch just off roading but i think it was the screaming of the engine that made it feel longer.
@wolfparty4234
2 ай бұрын
Bro, you did a great job building this buggy,driving it and handling the trails! You should have a more send it/I’ll fix it attitude then caution…!
@joshgoodrum3448
2 ай бұрын
Momentum is your friend when climbing! Especially with a light buggy and a high rev engine..... dont be scared of it or nervous! Thats a very capable buggy if driven right.
@jamaicatvtv4215
2 ай бұрын
rather B welding good job today
@FalloutBreakbeat
2 ай бұрын
This is a supreme victory for man-in-shed creativity. 👍
@narongritnoipetch4085
2 ай бұрын
The most brutal road, the most crazy people, the most extreme, young man.
@tobygarrett7092
2 ай бұрын
Day 1 not so much but day 2 the mini rock bouncer would love that!
@j-beatsimaginationstudio1987
2 ай бұрын
BOSS level build brother! Great video too. Be safe :)
@TheMeanderingNomad
2 ай бұрын
Im ready to see your crawler build! Thats going to be a fun series! Thanks for the videos...
@heartsky
2 ай бұрын
That has to feel great building a vehicle that can traverse that terrain, and being able to drive it too -- Congrats!
@Crazyd64
2 ай бұрын
Man tire upgrade for sure! It did great especially something you built from scratch! Love it!
@videobyallen
2 ай бұрын
I saw 50mins and thought this might be boring but i was wrong. Cool vid. Fun to watch your fab skills doing real work. Impressive!
@kizzmiaz
2 ай бұрын
Thats a beast. I love this project, it looks cool and is extremely capable. Bravo!
@ProlificInvention
2 ай бұрын
That was some excellent footage, awesome build also-blew my mind it did so well with those wicked trails
@rogerwerner6446
2 ай бұрын
I've been watching your builds over the years. Your buggy did well on these trails. A question for you: Have you thought about building a buggy with a rear drive set up similar to your front drive set up? And then building a covered chain drive to keep the mud and rocks clear of them. That might reduce your chain stretch issues. If you keep your present rear suspension and drive set up, it lends itself very well to a variable height suspension. You don't have to worry about cv angles and it is a way to get more ground clearance, Very cool rig. Work out some bugs and she will be a super fun and well rounded rig;-) I love to see your stuff out there cuz I am starting the process of building a do it all off road buggy which will have a motorcyle engine and chain drive. Very different from yours, but not so different. I always think it is funner to build something than to buy something. Keep up the great content!!
@tradesman1000
2 ай бұрын
Nice work mate 👍🏻 what a machine! Still amazed you’ve built it all in the little back shed.
@johnhiggs325
2 ай бұрын
Considering your inexperience off-roading and still “testing” your machine, I think you did very well.
@danoconnor3639
2 ай бұрын
You got to hand it to your buddy , the man has miles on top of miles of patience
@steveww07
2 ай бұрын
i thought so too
@diofebriansyah5710
2 ай бұрын
man i love this kinda trails i grow up with this type offroad i love see more something like this and cant wait for the project
@MrCaprinut
2 ай бұрын
Leave the lockers on at all times on trails. Helps getting over stuff. Also lower tire pressure would not hurt.
@throwawaypt2throwawaypt2-xp8nx
2 ай бұрын
he said he was running 8psi and 10psi
@jasonhudson5861
2 ай бұрын
@@throwawaypt2throwawaypt2-xp8nxstill needa be lower :((
@throwawaypt2throwawaypt2-xp8nx
2 ай бұрын
@@jasonhudson5861 yea he said the tires still feel rock hard
@jasonhudson5861
2 ай бұрын
@@throwawaypt2throwawaypt2-xp8nx no way
@rico8089
2 ай бұрын
It's amazing you built that, and it's really capable. You should lower your tire pressure and leave a gap when following so you can keep your momentum through the tough sections. 👍🏼👍🏼👍🏼
@fluxline3464
2 ай бұрын
really like your content and what you can do in your little shop. please start adding a rugged, metal, secure tools box to your rigs.
@17madracki17
2 ай бұрын
Shes working good dude !!! Love that truck so much
@01phill
2 ай бұрын
Definitely impressive ive watched ever one of your builds. Your mate is right about 35 tyres on your build plus it would look even more aggressive then it is now
@patgravel-z1o
2 ай бұрын
Don't be so hard on yourself you run a homemade machine keeping up to a mass produced machine with all the factory testing, You are kicking ass
@allancunningham6019
2 ай бұрын
You wanna be proud of yourself your truck is brilliant well done.. great video 😊😊
@rhyswoodman6781
2 ай бұрын
Tyre pressures! But all in all you've done a fantastic job Chris.
@throwawaypt2throwawaypt2-xp8nx
2 ай бұрын
handling that wire bare handed made me wince
@m.hildanhildan41
2 ай бұрын
Woooow its cool, no. Problem slowly but sure
@jasonbirch1182
2 ай бұрын
Your problem with stalling it is that those engines don't make any power down low. You need to keep it in a lower gear and keep the RPMs up.
@jasonbirch1182
2 ай бұрын
You should never be in a gear on a major hill or any heavy load with your tach below like halfway on a sportbike motor. You should never need to touch the clutch while climbing if it's in the right gear.
@jasonhudson5861
2 ай бұрын
@@jasonbirch1182your statements are very true but he has a secondary tranny to reduce the gears even more cause he wants it to be a crawler. If it was a bouncer I’d totally agree. I think he needs better clutch control because you are right that engine isn’t doin anything at lower rpm’s a second clutch on a handle or near the steering wheel would allow crawling an using the clutch way easier imo but if anything as people said even lower pressure then what he’s running would lower the tire size an gear it even lower/makin it grip even more
@jasonbirch1182
2 ай бұрын
@@jasonhudson5861 you should never be using the clutch to crawl. How many reducers he has has no bearing on it when he's lugging the engine. Watch the tach. I can't see numbers but, he's running all the way on the left side trying to crawl up crazy stuff to the point he needs to skip the clutch. He should be in a lower gear where the engine is making power and has no need for the clutch.
@eightsecet
2 ай бұрын
Good job Bro! All the hard work and struggles were worth it!
@David-u5f3v
Ай бұрын
You got a great vehicle dude
@optimalprimidius7295
2 ай бұрын
The whole time I kept thinking of Star Wars from the sound of that it made. Totally awesome!
@NoflikOfficial
2 ай бұрын
Might be a boomer thing to say, but man you should be proud of yourself for being able to make a machine like this by yourself. I'm very impressed!
@BenCarpenterWrites
2 ай бұрын
Amazing watching you drive this home built machine through this. Plenty for the armchair warriors to critique but it’s just amazing what you accomplished with this build 💪🏻
@bradensmith888
2 ай бұрын
This is incredibly impressive! I don't think there are any other custom diy builds on youtube that could've handled this trail as well as yours did (excluding rock bouncers, of course)
@Lander76
2 ай бұрын
Seriously impressed how capable your rig is, I've got a feeling the next one you build is going to give that rzr a run for it's money.
@horacegray2417
2 ай бұрын
Food for thought, brother you might wanna look into a recluse clutch. I believe they sell them for the Hayabusa motor turned it into a semi automatic for crawling. It might be nice to be able to put it in gear and just not worry about the clutch.
@MrFixit1
2 ай бұрын
Wow you wan in some hella' trails! Your machine has done well, and you should be proud!
@Henrik.Yngvesson
2 ай бұрын
I've been thinking about a skinny lightweight spider like ATV. Like 4 dirt bike wheels on long arms with long suspension travel and articulation. Kinda like the "Swingcar".
@bryduhbikeguy
2 ай бұрын
Vindication ! For all those giving lip about 'chain drive' and the discs protecting the sprockets...'nuff said. Chris, you have multiple shock mounting holes, perhaps try lifting the ride from them for the rocky trails next time.?. The buggy did Awesome.
@takerkanefan108
2 ай бұрын
Go away bots, we're watching greatness
@EdBlaschke
2 ай бұрын
Man, I think that thing did a phenomenal job. If you just had bigger tires on it I think it would’ve done better.
@EdwardRoss-tb5hz
2 ай бұрын
A few more tweeks and more seat time. Awesome job on the rig!
@Silverlyx
2 ай бұрын
The only advice- when driving off road, try and keep thumbs outside of the steering wheel- if it kicks hard at the wrong time it hurts like hell at best. But that was neat driving in a truck YOU built 🤯🤘
@keithallan007
2 ай бұрын
Best video yet. Some extreme trails and you didn't cuss as much as I would have.
@danielpaulson786
2 ай бұрын
Yes the recluse radius x clutch is what you need with a Honda xr600r engine with dual carbs.whatever you had that combination in would be unstoppable and easy to drive.
@ChristianPareATLAS
2 ай бұрын
Taller tires would help with clearance and roll easier over everything but not wider. Love your buggy 🤠
@richardmcgaffin5609
2 ай бұрын
Dude u are amazing man. I love your channel.
@KozakMamai
2 ай бұрын
Чудове баггі. Але йому потрібен двигун з більшою кількістю крутного моменту на низьких обертах колінчастого валу. У випадку рушання після зупинки це дуже помітно. І не став на це баггі варіатор як рекомендують інші коментатори. Варіатор зїсть крутний момент на низьких обертах та буде дуже нагріватись. Цю помилку зробили Subaru на своїх автомобілях Outback та Forester. Вітання з України! 😊
@JW-fq1pp
2 ай бұрын
Knobbier tires may be all that thing needs. Pretty cool.
@josealmeida8731
2 ай бұрын
Holy shit that it's insane but looks like you've build it right, WAY TA'GO
@murta1979
2 ай бұрын
Very impressive!
@xyic0re714
2 ай бұрын
You're a lot braver than I am taking an high revving engine with all those electronics in there. I'd be finding the toughest torque producing diesel I could!
@RandysRides
2 ай бұрын
Just a suggestion... bigger (taller) tires that you can air down. That way you won't have clearance or grip issues as much. Cool vehicle.
@roadsidegarage69
2 ай бұрын
he said in another comment he had 8 psi in the front tires and 10 psi in the rear tires
@Ratkill9000
2 ай бұрын
I think trail 16 would be better suited with a CVT instead of a manual gearbox. Maybe get a hold of a mid 2000s Yamaha Phazer 500 4 stroke snowmobile engine. Get some side x side gear box for a CVT and the differentials. Least then less chances of stalling out since no manual clutch to worry about. Also the engine if I remember is fuel injected, so no dicking around with carburetor tuning.
@steveww07
2 ай бұрын
he refuses to use off the shelf diffs though, makes no sense.
@roadsidegarage69
2 ай бұрын
@@steveww07 he used like a fucking kia car diff or something in his mini dune buggy
@steveww07
2 ай бұрын
@@roadsidegarage69 I remember, but then didn't he make some weird contraption to hold it?
@roadsidegarage69
2 ай бұрын
@@steveww07 he made a custom housing for it to convert it to chain drive
@thomashemingway8835
2 ай бұрын
Buggy did great, man. did awesome
@corbinkelley2670
2 ай бұрын
What a Beast you have created. Great Job
@throwawaypt2throwawaypt2-xp8nx
2 ай бұрын
not to be confused with the new pdf beast
@jasonhudson5861
2 ай бұрын
@@throwawaypt2throwawaypt2-xp8nxtotally did
@president2
2 ай бұрын
Love it so much keep it up as always 💘
@rarbaugh07
2 ай бұрын
Terrible Herbst Baja truggy theme paint job would be awesome
@yenerm114
2 ай бұрын
That thing did awesome for the gnarly trails y’all were riding 👌🏻🤘🏼 went from a 1 to 10 difficulty trails real quick 😆 good thing it didn’t break down! That would have been roughhhh , lil shorter wheel base , lil more ground clearance I think ya would have made it outa them few times ya got stuck! All n all awesome job 👌🏼 👏🏼 🤘🏼
@victorkupihea7858
2 ай бұрын
That things badass bro love all the vids u put out.
@robbiehively4056
25 күн бұрын
I'd say if you adjust the travel on your suspension give it more height and switch your chain to drive shaft that thing should be awesome. Also let some air out those tires lol.
@scuffedthings530
2 ай бұрын
i would love to see some fenders on that thing to make it look like a trophytruck instead of a buggy :D
@throwawaypt2throwawaypt2-xp8nx
2 ай бұрын
homie pulls up in the homemade machine and dominates
@courier11sec
2 ай бұрын
Hell of a performance for a machine you built from scratch. You should feel pretty good about it I hope. Seems like the first time you pull out the winch is like when you break the seal at the bar by using the bathroom the first time. 😆 Hell of a job dude. Really enjoying your projects. I can't belive someone to a bone stock jeep on that trail. I mean I know they are really capable but that seems a bit optimistic. Also echoing the suggestion about your tire pressure the other person made. Get them things nice and squishy!
@ryanwalker388
2 ай бұрын
That's an insane trail for your home built rig. I could see you building a 4x4 version with the aggressive angles of the CBR1000's 2wd front suspension doing well here. That clutch and ground clearance was the main issue. The roll bar mound snagging up probably didn't help. You could cut small notches in the chain guards for extra traction.
@whosaidthat5236
2 ай бұрын
Looks like you should have brought the mini rock crawler/bouncer lol good video looks like a fun day overall. commented this before you said this is better
@BCDriven
2 ай бұрын
Another offroading tip, don't bother spooling your winch all the way in, it's a lot of time and wear on the winch if you're just going to pull it back out later in the trail. Instead once you get free, take the remaining cable and wrap it around the bumper or throw it through the windshield into the passenger seat. BTW Could not recommend swapping to synthetic rope on the winch enough. It's a lot less lethal when it snaps and it's much easier to pull and hook up.
@OFFCODEV2
2 ай бұрын
Id recommend some side guards for those expensive king shocks
@eugenesbackyardrepair4593
2 ай бұрын
Chris maybe check into a recluse clutch. If I remember right that changes it to being able to shift just by letting off throttle
@Gunzo1999
2 ай бұрын
Let out some fire pressure for Pete’s sake 🤣🤣🤣🤣🤣
@BlackAndBlueGarage
2 ай бұрын
I like all the blue sh!t 😁. You got some talent brother. I'd love to see something made using a couple jeep Dana 30s. They are super beefy on a very light build. 😁 You probably got your next 5 projects planned out tho. Keep it up man
@gagepuffinbarger6939
2 ай бұрын
You gotta getcha one of them centrifugal clutches. I'm sure they make them for your engine.
@dalemorton2364
2 ай бұрын
You and Matt from bleeping jeep should get together and drive some of wind rock trails together he knows so much about wind rock trails
@danielpaulson786
2 ай бұрын
Got to proof of concept it somehow.what better way than in the field.
@camino6431
2 ай бұрын
Hey! You should be keeping up with Steve Morris Engines. He just announced that he is working on a 3 cylinder rotax head and block for a Guy that builds those engines and they are getting 900 HP from a 1200cc 3 cylinder rotax engine. Just thought you might want to look at it.
Пікірлер: 366