사진 입형 탱크 맨 아래에서 냉수 흡입 .진공 별도 흡압.모두 같이 배출 입형 탱크 상부로 들어와 별도 상부 배출. 냉수 맨 아래 흡입 순환 이죠
@saurabhp3372
4 жыл бұрын
Awesome animation keep posting
@YH100T
7 жыл бұрын
thank you!!
@user-vd2wl1tu3d
6 ай бұрын
물 순환 맨 아래 흡입 순환 탱크 아래 에서 물 흡입 최종 아래. 기체 배출 최 상부 .기체 배출 중간 이면 물 배출도 일부. 수봉식 진공 은 물이 회전 기체 흡배.이때 물 온도 0도 이상 저온 진공 고압 냉 기기 이용
@marciovries7102
2 ай бұрын
Why should there be a high diff temperature for the pump to start
@user-vd2wl1tu3d
3 жыл бұрын
윗 펌프 겨울 휴기 응고 방지 부동액 기동중 넣기 a 기동 끝 나고 휴기 시작 잠시 기동 넣기 b 어느것 효과 촣습니까 영하 5도 이하 휴기 마다 넣어야 합니까 한번 넣어면 안 넣어도 됩니까 영하 20도 계산 부동액 넣음 부동액 넣고 기동 흡입 기체 의해 배출 부동액 없어짐 맞습니까
@user-vd2wl1tu3d
2 жыл бұрын
사진 둥근 통에 일정 냉수 넣고 기름 기체 흡입 둥근 통에 기름 기체 저장 출구 사진 횡형 통은 냉각기 기름 기체 많어면 진공 저하
@aniswijayanti3723
4 жыл бұрын
When the condition is low vacuum, we use the first stage and exit through the check valve, how can the gas pass through the check valve and not enter the second stage?
@WorldofVIku
2 жыл бұрын
SEND YR QUERY TO MY EMAIL vikrant.sec@hotmail.com
@user-vd2wl1tu3d
3 жыл бұрын
수봉식 진공 펌프 에 물 항시 기득 물 회전 의해 기체 흡입 배출 진공 은 펌프 상부 흡입 배출 따로 물 순환 물 점도 있어면 회전력 부족 진공 부족
@abdulrahmanaljohani9161
4 жыл бұрын
What is the using of recirculation pump... since some of vacuum pump system don't has the recirculation pump?
@deepb154
4 жыл бұрын
Recirculation pump take care of pressure drop across pipework and heat exchanger and ensure a adequate flow of seal liquid to pump. Smaller pumps can be run without circulation pumps, but bigger pumps need this.
@EmonDhara
4 жыл бұрын
Highest Vacuum Can be Achieved?
@user-vd2wl1tu3d
2 жыл бұрын
수봉식 진공 펌프 안 일정 수위 냉수 순환 펌프 내 온도 액체 유동 저온 진공 높다 액체 유동 고온 진공 낮다 맞습까
@nguyennhut4178
6 жыл бұрын
Please tell me, What's the small pipe connect from nearly outlet #1 stage to separator tank ? What do pipe? how work ? Thankyou
@Siddhu-dd8kn
5 жыл бұрын
it prevent the pump from capitation.by
@deepb154
4 жыл бұрын
Cavitation prevention
@deepb154
4 жыл бұрын
This is a small pipe work from liquid separator to pump inlet to prevent the pump. from cavitation threat
Пікірлер: 20