amazing video and graphics ...thank you so much sir , greetings from India
@rushyendrakumar3335
6 жыл бұрын
Simply superb👌👌
@TheToxicReverend
5 жыл бұрын
Could the OTEC system be modified to absorb excessive heat from the cooling towers of Nuclear Power Plants and or the spent fuel rod storage pools ? Such a system MIGHT have a Return On Investment and MIGHT be able to power a safe shut down in an emergency with or without diesel generators. All of which can present some very real problems and the OTEC may very well be a viable solution.
@Yev371
2 жыл бұрын
Hey, great thinking. I don’t know much about nuclear. But I’m curious, the excessive heat, is it a constant thing or intermittent, and at what rate? And what is the temperature?
@91047
Жыл бұрын
@@Yev371 als je naar Borsele belt en vraagt hoeveel m³ afgewerkte stoom ze per uur van resttemperatuur x naar water temperatuur y condenseren en je gaat uit van een maximale omgevingstemperatuur van 50 graden Celcius( op een zwart plat dak in de zomer) dan kan je toch verder?
@smritikumari3139
5 жыл бұрын
This is helpful for us👌👌👌
@gaminglexiconwizard
8 ай бұрын
The pump that is used to channel warm and cold water to generator, which energy they used to function?
@haskell3702
7 ай бұрын
This increases ocean bottom temperature
@mohammedabdelwahabsharafel2515
4 жыл бұрын
The model is available on redslibrary website
@GreenCheeseSand
7 жыл бұрын
Thank you.
@billblake6954
5 жыл бұрын
Love the idea. Does it ultimately 'warm' the ocean. Is this a significant 'fallout' from the process?
@beback_
4 жыл бұрын
It cools down the surface, warms up the deep. Overall, it cools the ocean down slightly.
@nofekun1889
3 жыл бұрын
@@beback_ tf? how?
@aritraroy6592
3 жыл бұрын
@@nofekun1889 I'm assuming by absorbing the heat from the water to turn into electrical power? It would be nice if we didn't need a temperature difference to absorb heat and turn it into electrical power, but no, we need the system to "flow" from hot to cold. So, some of the heat is captured and converted into electrical power, while the rest of the heat is pushed into the cooler, deeper water.
@Yev371
2 жыл бұрын
Not really. it largely depends on the hydrodynamic design and modeling of the in-out-plumes. The study was done on a pilot plant that’s being build in Martinique and the warming of surface layer was found negligible.
@user-gq1yx6mi7x
5 жыл бұрын
awesome
@RCP-1136
8 жыл бұрын
Couldnt this methode be used to counteract the global warming of the sea water? And produce electricity in the proccess?
@hemdesai4279
7 жыл бұрын
Respected sir, If these system is applied in ocean a number of times, then wil the natural temperature difference in ocean be at risk and it may disturb ocean environment and other living creatures etc.?
@tudelft
7 жыл бұрын
Unfortunately, I can not answer this question. You should contact Berend Jan Kleute, contact details are available on this website: www.oceanenergy.tudelft.nl/thermal-gradient-otec/. Kind regards, Mark
@vikasojha3413
7 жыл бұрын
yess
@beback_
4 жыл бұрын
The amount of energy exchanged is not geologically significant... I hope.
@beback_
4 жыл бұрын
Would this work in the Persian Gulf? Or is that too shallow?
@philoso377
3 жыл бұрын
How much m^3 of sea water at 20-deg difference is required to generate 1kW? What is the allowable and attainable temperature rise (heat loss) between inlet and outlet of deep sea pipe?
@Yev371
2 жыл бұрын
At 1000m depth, with temp 25C to 5C, warm water has T delta of ~2C and cold water ~2.5C
@philoso377
2 жыл бұрын
@@Yev371 no sure I get that. Advice?
@diazdenmarcd
2 жыл бұрын
Use formula for Q=mcp(delta T), answer is 11.94 m^3. Sorry for late reply :)
@philoso377
2 жыл бұрын
@@diazdenmarcd can you explain what Q, mcp is and their units.
@kumarabhay123
2 жыл бұрын
Wow
@umer1185
6 жыл бұрын
I think it is not worthwhile. Because still we need energy to pump the water from the sea
@shivakumararm9082
6 жыл бұрын
Umer Ashraf ....why u r pumping the water ..u can put amonium fluid boiler on see nly ..that mean their is no pumping of water
@MagicBoterham
6 жыл бұрын
Calculations show that the energy loss from pumping is far less than the energy gain from the heat used to expand the working fluid with the low boiling point.
Пікірлер: 37