Oh man I was trying the entire day to get this done without it leaking. I am gonna try this.
@unown_
3 жыл бұрын
Update: it worked perfectly and cheap! Thanks
@ps23geer
Жыл бұрын
My application is going from typical cheap 3/4" non-kink pvc pond tubing to 90-degree elbow with clamp. Tubing carries water up 4 ft to a waterfall. Simple things are the best. Tried Pipe thread wrap on fitting, but clamp would deform it. Worked for a while. Just could not clamp down hard enough to prevent leaks. Just tried silicone spread around the connector, has not cured yet. Thinking that will fail. Actually, thought about plastic electrical tape or the siliconized tape around the fitting instead of the pipe thread. You gave me courage to try. Thinking the duct tape might rot exposed to water. Strangely, I can find no help on internet. Conventional HW Stores useless. If I can find a connector-tubing match that works, I was going to re-plumb the entire water-feature, thinking the tubing was too rigid. THANK YOU!
@termiterasin
Жыл бұрын
Thank you this tip will probably help with my leaks
@coachfrankie1112
2 жыл бұрын
This is gold. Thank you
@jhors7777
3 жыл бұрын
Thank you for posting this helpful video
@AuronFFX
3 жыл бұрын
Also works for pool backwash hose. No more getting sprayed by dirty pool filter water.
@gregk7915
Жыл бұрын
Very helpful, thank you!🙂
@blackgoldaquariums3195
2 жыл бұрын
Very helpful
@billpallatto2369
3 жыл бұрын
Great video thanks
@user-es4uy1ss2z
4 ай бұрын
My tube going to 22 feet water fall has failed where it connects to the pump. What is a smart solution without digging the ground to replace the entire tubing?
@zoradougherty5080
3 жыл бұрын
HI. This is super helpful. I am installing a UV filter light that one of your clients ordered a couple of weeks ago....You didn't remove the smaller part of the nozzle before putting the hose over the area ---you suggested removing it --would you use a sawzall or ???
@WebbsWaterGardens
3 жыл бұрын
Good catch, but we do mention cutting off the end at the :40 mark. We just didn't want to destroy the actual fitting so we can resell it : )
Пікірлер: 15