I did it, I love the sound and the actual "grainy" feel of it too now. Seems like I can somewhat feel the drag instead of just hearing it. Fantastic modification, thank you for sharing!
@ifishcatfish
Ай бұрын
yes, you can FEEL it. If you want to SLOW the drag, check the ifishtackle antisurge drag grease. You will be able to COUNT the clicks on the drag
@patrickthomas8052
3 ай бұрын
Wow dude you are the random KZitemr thats helps in an special problem, the sound is now crispy and nice thx
@spinning_freak
11 ай бұрын
It took longer than expected to tune in and keep the tail end perfectly balanced not too outside not too inside, finally got the best sound, thanks a lot
@ifishcatfish
11 ай бұрын
longer than expected indeed. But for 7 years no other brands have moved up their game. Its daiwa and shimano, and the sahara is too deam heavy
@DaveAngelic
2 жыл бұрын
You have done it again Victor, this was exactly the information i needed. On "2021 buyers guide - ultralight reels" video i told you about my European 2020 Legalis LT and that reel don't have ANY cuts on spool for acoustic so the already quiet drag sound of LT reels is even more quiet on that Legalis. You can hear absolutely nothing.. So thank you again maestro for this video, i will tighten the spring just a bit and i will remove a little bit of grease so the trade off won't be that much of a deal
@johnbetbabanta3724
2 жыл бұрын
I think theres very few people in the world with the knowledge and attention to detail you have of these reels. Daiwa needs one of you in every department. From start to finish. I think they would produce much better reels.
@ifishcatfish
2 жыл бұрын
I think daiwa is more interested in people who praise the reels they already have : )
@greenpea9412
2 жыл бұрын
This was very informative. I like mine as it is but seeing the mechanics behind the pitch change is really cool. Friction would certainly change how loud it is while it's clicking. I can also see how if you went to far that tip would protrude too far out to clear the rim its made to slide back behind. It would probably pop out of those slots before long. I think it's funny how you have found a way to change that addictive clicking sound we all love...lol. Victor, how funny would it be to mic that thing up and play it over a PA system out on the lake....lol That would be priceless.
@ifishcatfish
2 жыл бұрын
Yeah, i tried to highlight that in the video, not to go too far.. What is a PA system?
@georgefisher1719
2 жыл бұрын
@@ifishcatfish Public Address System it projects sounds & amplifiers them..
@natebonebusta
2 жыл бұрын
I got right to work. Revros didn't need much, but the Exceler saw a benefit in amplified sound. Thanks for the informative tutorial.
@ifishcatfish
2 жыл бұрын
Glad it helped!
@tomneumann2289
Жыл бұрын
Perfect!!! Best man on KZitem
@duanebledsoe7566
2 жыл бұрын
Just did this to my Fuego and then compared it to my Exceler that I have yet to do. Night and day difference! Doing them both right now!
@bogdanenache4993
2 жыл бұрын
Just did it and IT works! Better sound! Thanks for the tip!
@oceanoadriatico
2 жыл бұрын
bro on a long life this thing will get quiter because the more it runs and the more it get to it's original form
@billturner2370
2 жыл бұрын
Great information!!!! Thank You for posting!!!
@ifishcatfish
2 жыл бұрын
thanks budy
@MaxIQ77
2 жыл бұрын
We love Hollywood drag ❤
@ifishcatfish
2 жыл бұрын
ok : )
@homeboyzbundle9630
8 ай бұрын
Thank you my man..It work on reel..❤
@mosicnflowmuasyaj9748
Жыл бұрын
A loud clicking drag is nice to hear my shimano saragosa 10000 sounds so nice
@davidcloyd1296
2 жыл бұрын
Awesome, thanks. Minor adjustments are best, “measure twice, cut once” as carpenters say.
@ifishcatfish
2 жыл бұрын
Not bulgarian carpenters. Bulgarian carpenters say 'god dammit, 3 times already i cut this, and it is STILL short!'
@davidcloyd1296
2 жыл бұрын
@@ifishcatfish Haha!! you can get away with telling that joke
@hangyu0211
Жыл бұрын
I just adjusted the drag on my daiwa caldia 2500 following your guidance and it sounds much better now. And yes, there is a fine balance here between the loudness and roughness. I opened the thing too wide at the first try and while it sounded great afterwards, it felt extremely rough. I could feel every click where the metals bit each other. Then I managed to narrow the gap slightly and got the balance right. So thank you sir. You made me a happy man. BTW, is there a way to adjust the drag on Shimano Ultegra reel too? 🤣
@ifishcatfish
Жыл бұрын
tried to warn you. And yes, i made a similar video for shimano reels. Search my channel
@yep.fishing
Жыл бұрын
This drag clicker system is so much better than the cheap Shimano reels. My nephew used my Sienna and must have got it a little wet in the salt water and the little spring mech on the spool corroded and was not recoverable, I had to cut the little thing to free up the spool. So now its sitting in the rod rack, usable but no audible drag
@mohammednour5970
10 сағат бұрын
Thanks a lot
@jojobunny6540
2 жыл бұрын
This is what im waiting for thx victor 🤟
@ifishcatfish
2 жыл бұрын
take it easy with this!
@Tallnerdyguy
2 жыл бұрын
Now the real question... Can you add a clicky to the bail open? A big pet peeve of mine that it's silent
@ifishcatfish
2 жыл бұрын
Everybody's got some fetish.. : )
@Tallnerdyguy
2 жыл бұрын
@@ifishcatfish all of my other reels do, just bothers me that my 2 daiwas don't
@troutmagnetman
2 жыл бұрын
Good video Victor.....I am sure you know you can buy an aftermarket setup for that. I thought of doing it at one time but my days of tinkering with reels is over....old eyes don't work as they used to...LOL.
@ifishcatfish
2 жыл бұрын
Even i don't do that to all my reels. I dont think there is a net benefit in this..
@georgefisher1719
2 жыл бұрын
What is your thinking on removing the special grease on the felt washer that Luvias has on its drag ,is that a good or bad idea?
@ifishcatfish
2 жыл бұрын
bad idea. The drag on the luvias is perfect
@Fishing_rover
Жыл бұрын
❤❤
@davidvanmaanen-icperch2797
2 жыл бұрын
Question: do you think that closing your drag and leaving it like that during storage is harmful? My friend says he opens his drag when he puts away his reels.
@ifishcatfish
2 жыл бұрын
if you are a bass angler and you tighten your drag all the way for the crazy hooksets - then i would loosen it up before storing for the winter. The drag discs are either felt or carbon and you are compressing them and then the drag doesn't feel the same any more. But, on ultralight reels, where the drag is very loose anyway, you don't need to do that. I have never loosened a drag on one of my reels for the winter, because my drag is always very lose , even when i fish for carp. However if u fish with tight drag, i would agree with your friend.
@davidvanmaanen-icperch2797
2 жыл бұрын
@@ifishcatfish thnx for the explanation. I have never done it and I’m not really taking good care of my reels. The drag on my Fbs, FL and Vanford start to “lag”. They sometimes take a swim too. Since the beginning of this year I’m a prostaffer and now I have to start acting as an example haha. Thnx for the info komrad!
@davidrauschenbach6871
2 жыл бұрын
Thanks for the tips Victor, have a ballistic fw going to do knob and spool bearings upgrade but will throw this in the mix. Free play on my reel knob really noticeable you can actually feel it. Any idea on size of handle shims? Going with hedgehog 4 bearing kit. Have to watch your upgrade video again! Thanks and nice catch!
@ifishcatfish
2 жыл бұрын
no, i dont remember any size of bearings or shims. I watch my own videos to see what i wrote.
@5wisher5weet
2 жыл бұрын
I would also guess that 300m of braid on the spool will sound different to 200m of mono in terms of notice dampening
@ifishcatfish
2 жыл бұрын
Maybe a machine can detect that difference but there is bo way You can detect it
@stevenle4413
2 жыл бұрын
Thoughts on the TFO panfish rod? Specially the ultra light models?
@ifishcatfish
2 жыл бұрын
pretty. comfy. but just a normal blank and cheap guides. Im not saying its bad. I love pretty. But don't expect it to feel any different from any other $60 rod in bassproshops
@donaldstephensen8654
7 ай бұрын
Thanks for the information
@Fyzaltoha
2 жыл бұрын
Bruh should I pick shimano stradic fl 🤔 or buy daiwa reel ? Because my budget range is around stradic fl price
@ifishcatfish
2 жыл бұрын
Yes!
@AMLuc1320
2 жыл бұрын
Nice video Victor, I was waiting for this one! I’ve tuned the drag on some of my Daiwa reels. I also stuffed up one or two and ordered spare leaf springs from PLAT. If you’re going to do this I’d suggest ordering a few back up springs in case you get it wrong.
@ifishcatfish
2 жыл бұрын
I know... But i tried to say in the video to take this EASY and do very small changes..
@funky9820
2 жыл бұрын
You are a drag fan 😁👍
@ifishcatfish
2 жыл бұрын
audio. I am audio fan : )
@kaloyankolev82
2 жыл бұрын
Great!won't this tuning stop the rotation of the spool unnecessarily
@Sweetaccord
2 жыл бұрын
@Kolev No, the drag knob and washers and the downforce are the drag system not the clicker pin alone. Nor does the clicker pin have any effect or contribution to the drag operation.
@ifishcatfish
2 жыл бұрын
stop it? I don't think u can stop the spool. But obviously there is more friction, otherwise you can't make it louder..
@kaloyankolev82
2 жыл бұрын
I may not have expressed myself correctly. will that reduce the smoothness of rotation of the spool, the reaction of starting...
@ifishcatfish
2 жыл бұрын
yeah, that precisely is the tradeoff i was talking about in the video. U sacrifice some smoothness to make it louder. If you try this, do not make big changes. Open very little and try it first.
@bluesky5587
2 жыл бұрын
Big ups
@quanloikid1
2 жыл бұрын
Very excellent video. You can also find steel wire and carefully make your own. Also, your video presages the popularity of some of the tackle you evaluate. It was difficult to find the Legalis after your 1st video. You also know how hard it is to find the UL Presso after its Video. The KUYING TS642UL is now out of stock. You viewers take you seriously. You should do a Let's Go Brandon T-shirt.
@ifishcatfish
2 жыл бұрын
The Let's Go Brandon shirt has been in my amazon page for quite some time, i just didn't want to advertise it : ). But i hope people find it! And yes, i saw the rod got sold out. And once again i don't get a dime :) . Thanks buddy
@CaptDavesSportfishing
2 жыл бұрын
O-M-G😨
@ifishcatfish
2 жыл бұрын
Does this stand for - What a Great Video?
@CaptDavesSportfishing
2 жыл бұрын
@@ifishcatfish L-O-L. Can't believe you guys.
@crazyfacts1121
2 жыл бұрын
Full name is this reel
@ivanmahusay4315
2 жыл бұрын
I did that to my daiwa and when i got a big fish running really fast and ended up with a broken clicker
@ifishcatfish
2 жыл бұрын
did you use pliers? I mentioned that it is very important to use fingers to the legs of the spring remain straight or round. If there is a kink or imperfection it may prevent the spring from working properly. It is important to preserve the original shape. Still, on a ultralight reel it is unlikely to get a failure.. but on bigger reel and stronger fish - maybe
@matyuecaltex3419
2 жыл бұрын
Its not working on my kix caldia 4000 custom....😑😑😑
@ifishcatfish
2 жыл бұрын
how is that possible? If u did it, u have more pressure, if u have more pressure clicks will be louder
@matyuecaltex3419
2 жыл бұрын
Idk...but never mind..that reel already broken..very old one..so...i'll buy new n try it again..maybe it'll work..thanks for the tips..
@mcl560
2 жыл бұрын
thank you... shimano and daiwa are just being pain in the ass that's all. shimano drag sound slightly better but not by much. their engineers probably get away easy telling their boss that drag smooth cannot sound good. they should try a little harder.
@ifishcatfish
2 жыл бұрын
+1
@onyxcheong9278
2 жыл бұрын
This guy could have made the same point in his video I’m 3 minutes not 12
@ifishcatfish
2 жыл бұрын
Well u found my shortest video! If u think this is bad dont even think about my 30 min reviews!
@onyxcheong9278
2 жыл бұрын
@@ifishcatfish lol 😂
@maasai-
2 жыл бұрын
It’s just too flimsy to begin with, bad design daiwa .
Пікірлер: 84