Oooooo, Tihiti be gettin' a little bit of love now. That's encouraging to see cross-hatching in the cylinders still at 250K.
@fischermorrow7081
Жыл бұрын
Second, I’m a HUGE fan. I have a 2004 Tahoe myself and I use your videos to help me all the time. Thank you!! I’m going to be doing the 2007 brake conversion and the E fans soon!!
@GrandPrix46
Жыл бұрын
Before you order your parts, look into swapping 2019+ brakes on there. If you have 20" wheels, it's a better upgrade than the '07 brakes.
@GM-sk2wk
Жыл бұрын
Saw that coolant pour into the oil pan and thought it was a genius move
@MarkTisdelJr
Жыл бұрын
I also thought this.
@5.43v
Жыл бұрын
Timestamp?
@thomashopper3705
Жыл бұрын
@@5.43vjust look for it🤦♂️
@escaladetay8974
Жыл бұрын
@@5.43v 6:00
@GoodForYou4504
Жыл бұрын
Yup, I was impressed with the pro move to catch the coolant! Then he says "Happy accident" and LOL. Well we can all learn from that one! 🤣👍
@Loucfr
Жыл бұрын
If anyone is in need of a really good torque wrench, that Quinn he is using is superb for the price. It’s extremely accurate directly competing with Snap On at a fraction of the price. I looked up torque test videos that compared a bunch of different brands and the Quinn was on par, in terms of accuracy, with Snap On. Highly highly recommend.
@anthonylarios7592
Жыл бұрын
This is the perfect engine tear down ASMR video. Thank you for going step by step of the breakdown. I can’t wait to see how Tahiti will run after
@shadowopsairman1583
Жыл бұрын
Truck Norris is the answer, if you haven't already replace the left valvecover with the updated 1 from gm or dorman, felpro permadry gaskets/seals. New pushrods and trunnion upgraded rockers please. LS7 Lifters as well with the ties between them, new lifter trays. FYI its not piston slap you are getting the pistons are cam ground so they will seat better when hot. It is done in Aviation. While in there put in a HV HP Melling oil pump, make sure to use 2 .002" feeler gauges as a shim. Replace the cam thrust plate, the Oil pressure sensor with a angle adapter, use a brass sensor if you can find 1. No black paint but orange or red or a lighter blue. I had Mobil 1, and I went right back to Valvoline after Mobil1 caused lifte tick. I would have put a new balancer on the engine too. Fyi the old oil pickup tube o ring cause lifter tick because it doesn't maintain proper vacuum, it's why it gets replaced
@MrGFG003
Жыл бұрын
Man I love your rock and metal intros, as much as all the details you give while working on your rides. Not a Chevy guy here, more like a Ford one, but I found your content so much awesome. It's inspiring to see that someone actually is putting some love into a high mileage car instead of dumping it on some dealer or junkyard to get a new ride which might have some new features (=issues imho). Can't wait to see wht's comin' for Tahiti and your blue rides.
@jonsquatch
Жыл бұрын
Great video, they do make a kit for aligning both the front and rear covers that has 2 of those spacers you install in place of the seals so you install the seals afterward, and a straight edge that you bolt down on the oil pan rail so you can draw them down completely flush. There's only one of those since its the same bolt pattern front and rear, works a treat if you are going to do several on the stand although the oil pan usually works fine it does take the variable of the gasket out of the consideration. I have seen several of these where the oil pressure goes away and the only plausable culprit is the o-ring on the pick up tube. Honestly I also question when people say they nicked or squished it on install unless they are trying to do the 5 hr oil pump change with a fishing line and hemostats while standing on their head just to avoid dropping the pan. I swear even on the 3/4 ton 4wd its faster and easier to drop the diff down and pull the pan than mess with that. I think the OEM torque spec on the stock crank bolt is done with a minimal base torque and an angle gauge but straight torque like you did will get you good results.
@ya.boii_angel2828
Жыл бұрын
Your the reason I really got into mechanics and working on my truck to learn more ! The first thing I did was an intake then dropping the transmission! Keep up the videos on both cars ! 🔥
@gabesaldivar
Жыл бұрын
LsxMatt do you take everything apart yourself or do you have someone helping you behind the scenes. That's a lot of work to do on your own. 😁👍
@Chopski64
Жыл бұрын
He's a mechanic. Shits simple for him.
@shaundevine1030
Жыл бұрын
The Oil Galley Barbell in your LS based engine is something that is over looked. And yet it serves a very important mission of directing oil to the oil filter. If oil leaks past the Barbell it will go unfiltered directly to the Cam Bearing, Lifters, Crank and Rod Bearings. *Just an FYI to everyone watching the vid. No hating, just from every other vid I've seen, it's cheap insurance. Excerpt taken from LS1TECH Saccitycorvette*
@Wicked_RotF30
11 ай бұрын
I got on my 350k+ high miles 5.3L and she smokes and is sluggish under hard acceleration. Gonna rebuild in future, but she runs fine when driving easy. Gonna baby it for a while.
@paulminga4344
Жыл бұрын
Watchin that cam install reminded me of when u greased your steering shaft and u plunged it in and out from inside the bay and u blurred it out. That cracked me up!!
@santinocappellaro7468
Жыл бұрын
Excellent video Matt love the detail excellent job on that turbo drain line fitting. It looks like that's a must have rear main seal alignment tool you have there very interesting. 🏁😎🏁
@jefferykirby4625
Жыл бұрын
damn im pulling my lm7 to cam and refresh this weekend. went to look for the next vid thinking this was done 5+ years ago and didnt realize this was recent. didnt know people are still doing simple ls refresh vids anymore lol my buddy just got similar avalanche to mine and came from diesels. hes surprised how cheap it is to build ls's. im about ot take him down a rabbit hole.
@shadowopsairman1583
Жыл бұрын
Sometimes greases dont pass through the oil galleys, so use engine oil or engine assembly lube, not grease. I would have used a LS1 chain and not a LS2 Chain.
@chaselesser3191
Жыл бұрын
My 02 Avy has 386k Miles. I use to daily it 100 miles/6 days/week. But the 3/4 gears gave out and I just drove it around town for a year until I rebuilt with beefier parts. I’d daily it again if it wasn’t for 13.5/mpg b/c of the 35’s.
@philiprubin6370
Жыл бұрын
run a little atf in the oil. it will clean the inside of the engine like crazy. when i had my suburban's 6.0 apart it looked like it had 50k miles. it is at 240k
@mattm5786
Жыл бұрын
This is going to be so sweet can wait to hear her start up for the first time
@HaRLeYDvDsN1215
Жыл бұрын
Dude. I lost it when the music started when you lubed up the cam! Lmao
@Chopski64
Жыл бұрын
You didn't do a Sloppy special and just use your impact for torque specs. Nice work.
@highfaceoff33
Жыл бұрын
I’m Always excited to see the videos. I have a 2002 tahoe z71 that im also fixing little by little
@superior3384
Жыл бұрын
I only like tahini videos . That's why I'm here and re subscribed.
@KazDolla1
Жыл бұрын
Shouldn't you also checkpiston 1 is completely up when setting timing?
@DJEFlizZ215
Жыл бұрын
Do you think Tahiti will be finished before you get Ny snow? I’m anxious to see this build finished
@firstlast-cx8xq
Жыл бұрын
Crusty at 250,000 miles. 😂. My 02’ is rolling out 100 mile trips everyday at 396,000 miles and counting.
@johnbrooks2122
Жыл бұрын
If it was me I'd at least change bearings in bottom well plus rings to but just me..I have ls in my Cadillac escalade 2003 ,has 300k on it.but love video man I have lot think about when I do mine.
@coltonkruse2313
Жыл бұрын
Is the oil drain for the turbo in the front of the oil pan the typical spot? I assume it is cause Matt is pretty experienced, but damn that seems inconvenient to me.
@Large_Sarge
Жыл бұрын
I know I'm late to the party. Can you pull this engine out without discharging the AC? I have a 2004 Yukon w/185k miles. Just got it and It has a bottom end knock/tick. Pretty sure the owner loaded the oil with some type of thickener. Knock started the day after I paid cash for it. Debating pulling the engine and grabbing a reman or junkyard ebay motor. Later on I would be rebuilding the pulled engine with upgrades to put back in a later date. Thanks for any replies.
@8hunnit4life
Жыл бұрын
Installed covers wrong. You align the covers even with the block, tighten. Then install pan
@Dot-Ee
Жыл бұрын
I just got an 02 5.3 for my 67 Impala. Waiting for a rebuild. Got it blown apart rn. What would you recommend for a stockish N/A build for just street cruising and of course, some burnouts 😉
@robertmoore4637
Жыл бұрын
I wonder what my '03 5.3 is going to look like when I break it down after 545,000 miles. Just smokes a little on start up. I've been told I won't have to gap the rings for the turbo. 🤔
@jovawnguthrie8342
Жыл бұрын
You have to gap the rings because they will be hotter expanding more and will cause problems without adding extra gap
@davidrodriguez4529
Жыл бұрын
What can I do to fix piston slap I put on 03 in my 01 Yukon an I noticed when I start the truck in the morning it does that idk if you guys have any tips on fixing this thanks
@adventconstruct
Жыл бұрын
Love your videos Matt! What made ya decide to go turbo rather than supercharger?
@NotAGarage
Жыл бұрын
@12:16 😄😄
@deirickboothe8917
Жыл бұрын
so is this what you should do to a motor before putting turbo on it?
@deirickboothe8917
Жыл бұрын
if so i have a 97 tahoe what the difference between my trucks motor and this trucks motor? anything you can tell me would be helpful
@eazhar
Жыл бұрын
Shouldn’t the cam retainer plate have the recessed Allen/hex/torx head bolts
@lsxmatt
Жыл бұрын
Later years probably have them
@taurusbullykamp4010
Жыл бұрын
Are you in new York ?
@aarons7135
Жыл бұрын
I’ve been thinking about increasing power on my 2011 LC9 suburban. I tow and use the vehicle for road trips (not my daily driver). My idea lately has been swapping in a 6.2L L9H. Have you considered this?
@GoodForYou4504
Жыл бұрын
Have you tried changing the cam in the 5.3 yet? Stage 2 truck cam gives a big jump in both hp and torque.
@BuySellTrade-g7i
Жыл бұрын
Are you located in New York? So am I how much would you charge me to do this job 86 suburban with an LS 5.3
@BigWillAuto
Жыл бұрын
great video !!
@minitruckinaintdead7142
Жыл бұрын
Pewter tahoe gang love the build bro im geting ready to build a cammed 10.8 to 1 comp 6.0 for my 03 but I'm torn cause Mines show room new like 54k my grandpa ordered it fully loaded with some custom dealer options do I keep it stock or make it fun cause she's a garage queen unless it's nice out
@gearhead7896
Жыл бұрын
Good video, Matt. I don't know if you've seen these before but Melling put out two really great videos if you are not shimming the pump. One to center it; kzitem.info/news/bejne/27CwnIKhkYaiZWk and one to prefill it if you don't pressure lube it; kzitem.info/news/bejne/lmlvqaCNkHx-n20
@Whitebassonly
Жыл бұрын
GASP didn’t keep his push rods in order and used an impact to break head bolts free!!!!
@bradfordgross6786
Жыл бұрын
Keep it up"Nice.. I am suprised that you haven't researched Promo*SM!!
@eazhar
Жыл бұрын
First
@weightlifter59
Жыл бұрын
Hey Matt love your vids sir!. The cam "lube" you showed and the session music used to accompany it was HILARIOUS! Brought back memories of my younger days in the 70's from the drive in! LOL!! You appear to have many years experience in this area! Keep up the great vids Matt and cannot wait until work on the firebird resumes.
@todaywithbk
Жыл бұрын
Fantastic work! I am impressed with the wear on this motor. I have a 2005 Tahoe with 206000 and still going strong! Makes me feel better about the miles. Keep up the great work!!
@Whitebassonly
Жыл бұрын
Mine had 300k no knocks, ticks, smoking, etc. my dumbass replaced the oil pressure sensor blind with the intake still on, and didn’t see there was an old washer or part of something that didn’t let me seat the new one properly. Lost all oil on a long drive, never noticed low pressure until it was too late.
@todaywithbk
Жыл бұрын
@@Whitebassonly Man I hate that for you. Mistakes happen and we can all learn from each other.
@Thirdgen83
Жыл бұрын
More Camaro/Trans Am videos!
@ToriL97
Жыл бұрын
That's crazy that you were able to get those manifold bolts out. Where I live all you have to do is look at them wrong and they snap, or they've been snapped from rust and the weight of the manifold and you have a big manifold leak
@lsxmatt
Жыл бұрын
A few are snapped but they were like that already. The machine shop doing my heads have some titanium manifold bolts that I’m gonna try out.
@ToriL97
Жыл бұрын
@@lsxmatt looking forward to seeing how that works out. Hopefully no issues with dissimilar metals corroding.
@JonCaveman
Жыл бұрын
Awesome video sensei. I’m taking notes!
@josevaldes846
Жыл бұрын
Nice Job, those engines without the DoD last a long time with maintenance. Just wondering if you used the centering tool off camera on the crank for the timing cover. I replaced the oil pump on my Van, along with a collapsed lifter , wiped cam , etc and noticed it was not centered from factory and had a slight gap where oil was seeping out. Always had an annoying drip of oil here and there now it's finally gone. 2007 Chevrolet 2500 4.8 Liter Van 157,000 miles 2007 GMC Denali 6.2 Liter 222,000 Untouched
@Ronnie_ColemanTopG
Жыл бұрын
Yo when he said that at 16:12 is definitely crazy, i think he wanted it in peoples eyes
@Ronnie_ColemanTopG
Жыл бұрын
Anndddd 16:44 is even more crazy
@ren3gade__
Жыл бұрын
🔥🔥🔥
@eileenheitman4351
Жыл бұрын
Thanks for the great video, Matt. My Tahoe is at 185,000. Runs great but oil pressure starting to fluctuate....o-ring time. Dave in Omaha
@elbowjoe361
Жыл бұрын
Just wondering the logic of not doing a full rebuild when you’ve got the engine torn down so far. It’s been a while since I’ve done this kind of work but I did a 454 that I pulled from a bone yard for my Camaro and a 350 Buick and sent the blocks in for boiling and re-decking. Of course new rod bearings, rings and cam/crank bearings. Your engine has 250K on it. Seems like it might benefit from a similar approach, especially since you plan to turbo charge it. That being said, I have an 03 Suburban with 325K on it and it’s still pretty strong. Maybe GM built that 5.3 better than those older V8s from the 70’s. Love your content! Can’t wait to see Tahiti running again.
@GoodForYou4504
Жыл бұрын
Resealing and cam while leaving the rotating assembly stock is what a lot of folks do. Always hard to know what point to stop, but that one works out most of the time. Depends on how much money and time you have! 🤞
@jimmaag4274
Жыл бұрын
It's an LS, generally no need to fool around with the bottom end. I'm 56 and felt the same way as you when I first started looking at an LS swap but it seems GM got the rotating assembly right on these.
@RicardoRodriguez-zj7mc
Жыл бұрын
Yo my man wanted to ask I wanna build my Tahoe as well it’s a 2003 Chevy Tahoe LT 5.3 flex fuel I’m looking at cams but i don’t know if there is a difference between flex fuel and non flex fuel ?
@keyboiz916
Жыл бұрын
Ok I know I’m not trippen. But didn’t you put better sway bars on Tahiti? I was looking for the part numbers. Would like to improve them.
@juanespinoza435
Жыл бұрын
The only thing I dont like from rock autocis that I you need 5 parts you have to pay around 10 dolars per part totaling almost 50dlls
@aslacker
Жыл бұрын
I had those random worn pushrods on a 6.0 I just tore down . I'm gonna replace all the pushrods and the couple of worn rockers and do a bronze trunnion
@kevmx5323
Жыл бұрын
I had a crusty 2003 tahoe and it was still faster those Honda civic straight pipe things on the road
@InsanityMediaProductions
Жыл бұрын
you couldn't find a parts washer? lol
@patrickmatthews8644
7 ай бұрын
I about died when installing the cam and the music started. !!!
@REALflat1
Жыл бұрын
I personally wouldve pulled 2 main caps and checked for bearing wear having gone that far into it especially at 250k. One definitive way to tell if the crankshaft is riding low in the block is the torque converter support bushing inside the pump housing. I wouldve definitely changed out the oil barbell for a double o-ringed one too.
@lsxmatt
Жыл бұрын
I know if I pull them I'll want to replace them. Then that leads to cam bearings because they had some wear, and when the pistons are out for the main bearings I'll be wanting to re-ring and hone it. She's a solid runner so I decided just to leave it alone. Plus when I decide to really turn the boost up it'll need a built motor anyway so might as well see how far she can continue to go!
@yergtret9091
Жыл бұрын
Do you prefer the mellings pump over a ACDelco or Genuine GM pump?
@ShadowDancer6990
Жыл бұрын
Yo, I subscribed just for the cam lube music! 🤣🤣🤣🤣
@dsclaiborne31
Жыл бұрын
Why would you do all this work just to keep the nasty ass dished pistons in it?
@DesperadoGarageOfficial
Жыл бұрын
Hey Matt got a quick question for a 00 Chevy suburban ls 5.3 platform I have. I want to get more power out of it and I'm just at 210k. Runs great no issues and want to know what else should I upgrade or go with if I'm not doing a turbo setup rn? I may do one down the road in the future but for budget and getting better performance and stuff like that what else should I replace? Trying to get things planned out for next summer getting both transmission and engine rebuilt plus maybe a refresh in the transfer case. Rear end is new with only 98k miles now. I got it with 90k.
@papergatorzfedducca7998
Жыл бұрын
Did you have to degree the cam?
@akp41
Жыл бұрын
Great vid!!!!
@ER-ru6qp
Жыл бұрын
Every cam is a turbo cam
@DannyVillagrana
Жыл бұрын
I need one of those wrench
@thenuthing8258
Жыл бұрын
Gap the rings.
@bullast2046
Жыл бұрын
The music during the cam install got you a sub.. My kinda mechanic.. some emery cloth would knock the edge off that crank scratch.. and, haven’t finished the vid, but I’ve seen garage rebuilds use a wiz brush to clean off the pistons
@davidwinklepleck1196
Жыл бұрын
I have built engines for people over the last 40 years and several times when they did not want to change the rod and main bearings on high mileage engines they did not last. Also when putting a set of fresh heads the engine it will start pulling oil by the rings. I always change all the bearings and hone the cylinders with new rings on a block like you are building when it is pulled apart that far. . Start out fresh I am a retired master certified mechanic
@daltonbowery2365
Жыл бұрын
4:20 Must be nice my ‘01 makes all the valve train noise on #2 but ZERO piston slap ever, just a nice little Tik tik on cold starts
@ironmike742
Жыл бұрын
Turbo cam ???
@davebarron5939
Жыл бұрын
Heeeeeeesss Back! "Brought back by popular demand" Sit back and enjoy, smoke em if ya got em.
@red96fb
Жыл бұрын
If you forget to put in the barbell you'll not have oil pressure.
@stacydornan9765
Жыл бұрын
Found you again bro,never got any of your vids for some reason
@markinsacramentoshow
Жыл бұрын
Why aren't you gaping the rings?
@lsxmatt
Жыл бұрын
Amount of miles on it should have a wide enough gap already.
@danieltoole6735
Жыл бұрын
What's are your thoughts on the quinn torque wrench?
@nearlyheavenfarms2966
Жыл бұрын
You got me with the music and cam massage…
@danielb-c9100
Жыл бұрын
My Chevy and this was her piston
@keyboiz916
Жыл бұрын
Lmao so sensual with that cam 😂
@Josh-xj3fm
Жыл бұрын
Man that motor looks clean internally with that many miles. What oil did you run?
@lsxmatt
Жыл бұрын
I didn’t own it for the first 208,000 so I have no idea!
@jakewade7388
Жыл бұрын
Curious why you didn’t gap the rings.
@lsxmatt
Жыл бұрын
I figured at 250k they should be pretty opened up by now. a21bravo did a video where he pulled a stock 200k lq4 apart and the untouched ring gaps were already at .026-.030
@ericvortecmax
Жыл бұрын
You could have ran the drain to the timing cover
@lsxmatt
Жыл бұрын
Didn’t seem like there would be room when the compressor and accessories were back on.
@ericvortecmax
Жыл бұрын
@@lsxmatt oh ok. I’ve just seen a lot of people do it that way. I got to say watching your Tahoe videos have been really inspiring me to fix up my Tahoe. Mine is a 2001 2wd. I got it for free. It needs paint and a transmission rebuilt
@michaelvoigt724
Жыл бұрын
You giving out a prize? Got a message saying text a number?
@lsxmatt
Жыл бұрын
No not me, probably a scam!
@michaelvoigt724
Жыл бұрын
@@lsxmatt that's what I thought, keep up the good work brother!
@54inches
Жыл бұрын
Some of the more respected LS builders emphasize an oil pickup tube clamp, replacement two o-ring barbell and shimming the oil pump properly. I've seen you cut corners before and one of the reasons I do not subscribe.
Пікірлер: 117