oh man.... this is so good.... i love the sound of a perfectly sized turbocharger to a V8
@myotherusername9224
8 жыл бұрын
Now I know what it sounds like to be run over by you. What does it sound like when you drive past? That's a little more likely. ;~) Srsly tho, excellent work, this is the wave of the future for hot rodding, because they make engine bays with zero room nowadays. I guess manufacturers are just unaware that eventually someone is going to turn a wrench down in there someday.
@NicolasPerez15
7 жыл бұрын
FightClub MeetsHere thanks man!
@lilstinson618
6 жыл бұрын
What was the cost of this setup? I’m looking into doing the same to my 4.7
@flwfranco2821
5 жыл бұрын
Hmm I like this , I did the very same style on my WJ
@xmo552
4 жыл бұрын
Franco How?
@NicolasPerez15
10 жыл бұрын
thanks! i love the truck
@marstrucking423
10 жыл бұрын
I also have the 4.7 magnum v8 in dakota. Just curious and to help if you don't know the bottom end of our engined is all cast I heard and only good for about 450 total so be careful. I have a small turbo kit for a Honda that I'm hesitate to put on cause my need for power might take over and I will want to make more. Stock they push 245-250 or so so I'm guessing probably around 325 should be good but I wanna push mine to around 400hp. Should be around 12psi
@NicolasPerez15
7 жыл бұрын
marstrucking423 pushing 330 now. Pretty scary as it is
@freewolf990
8 жыл бұрын
Can you post more about this I want to do something to my 06 4.7
@NicolasPerez15
8 жыл бұрын
+Alex Bennett I put some additional info on here: dodgeforum.com/forum/3rd-gen-dakota/290067-turbo-talk.html
@scoobytuff
11 жыл бұрын
Nice!
@davidmitchell2523
2 жыл бұрын
I love the build. I wanna do the same to a 4.7, Stick shift Dakota. What size turbo, how is the oiling system ran, and tuning system?
@mrBugye
11 жыл бұрын
Did you rig it up yourself? sweet set up
@tylerwesthoff5656
8 жыл бұрын
what kind is it
@jonathanjaquez9732
2 жыл бұрын
It’s a ram 4.7 ?
@chekoibarra3326
7 жыл бұрын
just blow up my engine in my ram . I'm rebuilding it . what zine should be my pistons for turbo ?? 0.50? or 0.75 ??
@glennsambrana2919
5 жыл бұрын
Why under , guess you can't use truck for intended purposes. River crossings or offroading .
@dthompsont3796
4 жыл бұрын
A truck is made to haul things, not river crossing or offroading. You must be oblivious as to what the "bed" of a truck is made for.
@erendyalatorre7785
4 жыл бұрын
A truck was intended to haul and tow. Trucks were Not invented to off-road.
@MrEvilTag
3 жыл бұрын
Not everyone offroads. Some people use trucks for actual truck things
@glennsambrana2919
3 жыл бұрын
@@MrEvilTag What does that have to do with turbo that will suck in water when it rains? Driving only on sunny days I guess, I pull trailers , and all truck things loaded my truck with a ton of gravel first day I got it! While all the thumbs up people will fukc up cause their turbo is to low!
@MrEvilTag
3 жыл бұрын
@@glennsambrana2919 a properly installed turbo wont be exposed to the point of sucking up water off the ground
@thewarpuggaming1137
2 жыл бұрын
I know this is a older video wondering if you still have the truck and how hard it was to setup the turbo
@bongtoadboobender3921
2 жыл бұрын
I'm in the process of doing this to my 2001 blazer now just got started today as a matter of fact doing the same setup pretty much except my turbo is turned a different way and takes the place of my muffler
@kbtrucks
3 жыл бұрын
Hey I have a 03 Ram 1500 4.7 and I’m really wanting to turbo charge it. But I really like my magma-flow exhaust and I want to keep it but I’ve heard that with a rear mount turbo there is no exhaust. So my question is can I keep my magma-flow if I get a rear mount turbo?
@BADAZZ93STANG
6 жыл бұрын
What size turbo is that???Awesome setup...
@Aaron-my8dl
7 жыл бұрын
Did you do pistons and rods? how are you mapping? kool setup man. im looking to do the same in my dakota 4.7. mopar internals aren't cheap though
@NicolasPerez15
7 жыл бұрын
No internals other than cams. AEM 8860 standalone for tuning. Expensive XD
@redfox-zj5mn
3 жыл бұрын
I’m worried the internals aren’t gonna last since they aren’t updated to handle the boost
@GoogleAccount-wn2wp
3 жыл бұрын
@@redfox-zj5mn depends on the version of the 4.7 you have some come from the factory with forged internals some don't.
@JuanDopes
2 жыл бұрын
@@GoogleAccount-wn2wp 12' ram 4.7 would internals hold up?
@chrisredacted4797
Жыл бұрын
@@GoogleAccount-wn2wp the rods and the pistons never came forged but the crank did for the 99-04 HO model!
@Supercharged287SOHC
3 жыл бұрын
Where did u get the cams
@RagingBullNuts
6 жыл бұрын
Has this setup evolved?
@jameslakes5019
Ай бұрын
There goes 50 dollars of gas😊
@draconicwindbane2056
4 жыл бұрын
I want to do this to mine
@omarhernandez7042
7 жыл бұрын
if i may ask where did u buy the kit?
@germanium1872
10 жыл бұрын
Do you get better gas milage when you're not stepping on it?
@NicolasPerez15
10 жыл бұрын
about the same as stock, but shuld definitely increase when i FINALLY tune
@shemuelhawkins7516
5 жыл бұрын
I need to know how too do that asap
@paulbravo2945
9 жыл бұрын
I have a dodge 1500 4 .7 , on 35 and 4inches lifted, k&a set up and edge cts programs. Could I run this set up and what turbo did u used and how did u do it
@NicolasPerez15
7 жыл бұрын
Paul Bravo check out the link I posted. It'd not too complicated. But expensive
@xmo552
4 жыл бұрын
@@NicolasPerez15 I looked everywhere for a link. I didn't see it. Sorry, but I tried. Do you still have a link?
@PhillyFpsGaming
2 жыл бұрын
Wait wtf how u do that
@NicolasPerez15
11 жыл бұрын
Everything is pretty much custom. Garret turbo
@captainsnugglebottom
8 жыл бұрын
What kind of turbo is that? size/brand psi?
@NicolasPerez15
7 жыл бұрын
captainsnugglebottom t4 garret.
@oscarhollywood
7 жыл бұрын
How did you setup your oiling system?
@NicolasPerez15
7 жыл бұрын
Oscar Hollywood check out the link with the other response. A lot of info there. The truck now has 80k miles with the turbo set up and still drives like a dream. It has an exhaust system now so it's not so obnoxious
@t-bo7906
9 жыл бұрын
Did you change anything to make it run safely?
@NicolasPerez15
9 жыл бұрын
swapped to HO cams.Also got a tranny cooler off auto zone.
@t-bo7906
9 жыл бұрын
Nice I have a 08 4.7l and wanted to put a supercharger on but my motor is all stock you think I can do it on a stock motor?
@NicolasPerez15
9 жыл бұрын
is it the high output model?
@t-bo7906
9 жыл бұрын
Nicolas Perez yes with 310hp I would like to do that set up if I can
@NicolasPerez15
9 жыл бұрын
Wilbert Thibeaux Your truck has the forged internals. Go ahead and boost baby boost!
@t-bo7906
9 жыл бұрын
How the setup been holding up?
@NicolasPerez15
9 жыл бұрын
Wilbert Thibeaux Awesome! Daily driver. I'll post another video soon. Set up is been in the car for 50K miles now, only thing I've had to replace is the oil return pump and it was because I didn't screw it in tight enough the first time X(
@t-bo7906
9 жыл бұрын
Great to hear I'm saving to put this set up on my truck
@NicolasPerez15
9 жыл бұрын
Skip to 1:23 for a nice sneeze
@SugarShane
8 жыл бұрын
That's just backed up pressure. BOV bruh
@NicolasPerez15
8 жыл бұрын
SugarShane got one.
@flwfranco2821
7 жыл бұрын
Nicolas Perez is this an 02 Cherokee?
@NicolasPerez15
7 жыл бұрын
Mitsubishi Raider. But I think they have a lot of shared parts
@commando2074
5 жыл бұрын
give it a wot pull dammit
@robertwood3970
7 жыл бұрын
How are you supplying oil to the turbo? Do you have a separate oil system or are you using a line from the engine all the way back to the turbo?
@NicolasPerez15
7 жыл бұрын
From engine to turbo. From turbo to the oil reservoir you see under the turbo. From there is picked up by a walbro oil pump into the oil pan
@robertwood3970
7 жыл бұрын
I thought the oil would have to be pumped back up to the engine. I am thinking about setting a car up with a rear mount turbo. I might put a separate oil supply system in the trunk for the turbo. I think this would be a better setup because the engine oil degrades over time due to combustion blow by contamination. Also I don't like the oil lines running all the way back to the turbo then back up to the engine. Too many chances for a line to come off and then the engine runs dry for oil and burns up. Anyway, thanks for your reply and good luck with your setup.
@NicolasPerez15
7 жыл бұрын
Robert Wood you can tap into the oil pan no problem. You will need a turbo timer to make sure your pump runs for about 30 secs after u turn off your car. That way oil doesn't sit inside the blazing hot turbo. Specially after load
@NicolasPerez15
7 жыл бұрын
Ive had the set up for over 70k miles now. Oil always looks viscous during oil changes. Your set up is probably ideal,just warning you not too overthink it. This project is expensive enough as it is 😁
Пікірлер: 81