That glass dude is the coolest glass guy I’ve ever seen.
@jordancochran7979
2 жыл бұрын
"They do it good, we do it better"
@iamdigbick4675
2 жыл бұрын
Hayden got his car done. Now it's Wyatt's turn to finish his build.
@samljones
2 жыл бұрын
He's slowly but surely getting it done! But remember he's literally custom fabricated the entire truck so that's why it's taking time... it'll be hauling serious ass once it's done though 👌🏻
@iamdigbick4675
2 жыл бұрын
@@samljones I totally understand. I only said this because Hayden started his build around the same time. It was to give him a little motivation while also quasi busting his balls. I'll do whatever it takes to see that thing done faster, lol.
@TheGavinbullard
2 жыл бұрын
Dude I’m excited for his that bitch is going to be baaaaaadddd
@iamdigbick4675
2 жыл бұрын
@@TheGavinbullard I can't wait either. I hope seeing Hayden finish his build will be extra motivation.
@Jake_Hamlin
2 жыл бұрын
Cant wait for some v8 content on the channel
@calebhewitt8750
2 жыл бұрын
Love that Hayden doesn’t give in to any pressure. He’s patient and collected trying to get his car dialed in!
@kennanlynn4977
2 жыл бұрын
Thats why his shit doesnt break every other video like kyles
@lyfull
2 жыл бұрын
that and the last time he listened to Wyatt he sent a couple of pistons into the next state
@davismccoy77
2 жыл бұрын
His car gave in to the boost pressure though
@MrRunWO
2 жыл бұрын
Last time he gave in he blew the motor
@Saabspeedmaniac2k6
2 жыл бұрын
Stand your ground Hayden, it's your ride and your money. The others don't mind doing a motor swap every week. You just got yours together, savor the moment and save the rowdy stuff when it is dialed and you are trying to break your own records
@humbleperformance
2 жыл бұрын
Log wheel speed and slip w/o TC and make good hits without it. And build your TC Map around those good passes rather than the other way around. The best starting point is to replicate a good pass. There is more to it than that, but it'll get you in the range of building a good launch strategy faster rather than guessing and checking repeatedly. You'll see where your wheel speeds are supposed to be to cut a good short track, and then you can tweak it to find more time.
@hmmhuh12
2 жыл бұрын
Oooo. They have spoken
@InitialRacing
2 жыл бұрын
@@hmmhuh12 They have
@parl9731
2 жыл бұрын
Then it's back to back to back to back 7s all day
@jdu8y4m
2 жыл бұрын
The glass guy couldn't be any cooler.. I'm a fan
@Lusty_85
2 жыл бұрын
Didn't wana leave the camera 📷😂
@Sflhunter
2 жыл бұрын
I was coming to say that same thing lol good vibes
@DavidLopez-zt5gi
2 жыл бұрын
Big fan👌👍🏽he’s hella cool
@itsjussjerry
2 жыл бұрын
Yeah man, cool ass dude!
@kevinlee4644
2 жыл бұрын
He’s a cooler and your a fan. I c wut u did
@carsonm6768
2 жыл бұрын
“Boost cut. Im not pedaling that shit i wanted to fucking ride it out” goldd😂😂😂
@amalfi460
2 жыл бұрын
Love how Brent doesn’t get into the boost cut argument lol
@benrobertsuk
2 жыл бұрын
He's grinning like a proud father, watching his Boiz, turn into Men!!!😜 UK🇬🇧
@Jake_Hamlin
2 жыл бұрын
At 13:40 Brent agreed with Hayden, dont change the boost cut, figure out the rest
@imdabeast100
2 жыл бұрын
Everyone’s speaking English but no one understands each other. Wyatt wants to see it go to the moon and Hayden’s just trying to say he wants his boost managed
@mattcory619
2 жыл бұрын
brent is a legend man.. and i dont mean that loosely, i mean hes a legend. his positivity and will to just teach others has created in the long run a great group of friends who connect through cars.
@Cygnus307
2 жыл бұрын
He knows better. You have 5 guys talking over each other spitting out their opinions, why waste his breath?
@loganslost1966
2 жыл бұрын
Make your fueltech control your slipper and intercooler pump. I use my haltech to control the slipper on my dsm.
@otm646
2 жыл бұрын
The icebox, the slipper all those race specific functions need to be driven off one control relay.
@Nebbia_affaraccimiei
2 жыл бұрын
if only they had an ecu able to control all that.. oh wait
@SkatersOfTheNorth
2 жыл бұрын
@@Nebbia_affaraccimiei it’s not easy to sort out on a whim takes a lot of fucking around which is time consuming
@Addison0526
2 жыл бұрын
@@SkatersOfTheNorth pulling a trans is pretty time consuming too when you break it
@Pinky.1523
2 жыл бұрын
Brents the man,he’s always helping everybody else,that dudes my hero lol
@just-in-time6069
2 жыл бұрын
The lid lifting show how much air is lifting the rear at high speeds and maybe adding belly pan to rear will help to keep tires planted at speed keep up great work.
@brandonweeks
2 жыл бұрын
Rear splitter instead of belly pan
@justhogs2175
2 жыл бұрын
Have you guys taken a good look at wheel speed logs or talked with FuelTech to see if maybe your actual sensor setup is the issue with traction control? Only having 5 triggers (10?) per revolution from the lugs is kind of low resolution, so I wonder if maybe you'd be better off using ABS tone rings or something else a bit more precise.
@danielclark7397
2 жыл бұрын
Well said
@ForgedEggs
2 жыл бұрын
Very sharp, I'd completely forgotten about that horrid sensor setup.
@ste_v1983
2 жыл бұрын
You need the same duct tape sign as cleetus. "Turn on intercooler" turn on slipper!!
@Saabspeedmaniac2k6
2 жыл бұрын
It's like a post it note for the car lol. When you get amped,it's easy to miss little things
@brycedavis907
2 жыл бұрын
@@Saabspeedmaniac2k6 my buddy put a sticker on the tank of my roadrace bike that said "got gas?" after I ran out twice in a day.it really worked, I never forgot fuel again!
@RandDCustoms2
2 жыл бұрын
So much pressure on Hayden. Good on Brent for not adding to the pressure. Tough break.
@jakelong4271
2 жыл бұрын
He knew it wouldn't do any good trying to help, if Hayden wanted help, he'd ask. Brent is such a good dude, hope he gets this EPA win.
@freedomfox8183
2 жыл бұрын
Damn .. big power comes with big problems sometimes.. build- race- break- repeat
@evanhasner
2 жыл бұрын
More like build-break-build-test-break-buy another car
@Jake_Hamlin
2 жыл бұрын
Any kinda of race engine is always more maintenance than use. Even naturally aspirated. I raced two stroke bikes growing up and it was constant.
@freedomfox8183
2 жыл бұрын
@@evanhasner not really the mr2 has been the main focus as far as drag racing for a long time enough to get the world record and his other car is a personal car more than anything it just happens to be stupid fast to and also the world record holder .. that's how the race world is I have two cars and building a third also two bikes one to race one to street ride unless your into it is hard to understand but he's got a following where everyone wants different things so he has to accommodate everyone and the hatch is the channel staple so Alot of ppl wanna see that Asap too ..
@zmuse
2 жыл бұрын
With consistent noise in every gear I'd check the clutch/flywheel.
@brianm6117
2 жыл бұрын
nah, that's a gear issue. Either the diff or maybe the intermediate shaft in trans. I put a trans together with bin parts and missed where one of the gears had a small chip in it. Going down the road the trans went into every gear fine, but the clicking was loud and consistent.
@seanthompson6720
2 жыл бұрын
@Erik Hyndman it's a transaxle
@Jefreeman13
2 жыл бұрын
@@seanthompson6720 It still has a diff tho
@LiveLifeFully27
2 жыл бұрын
Match the safety of your new cage with other measures: better fire suit, HANS device, run passes with your visor down, fire suppression system, etc. It is expensive but stay safe; that is paramount to your ability to keep pushing the limits and advancing day-by-day. Don’t wait until something happens to implement these steps. Keep up the grind!
@adriane7841
2 жыл бұрын
Add Window net
@gottacatchemall3887
2 жыл бұрын
I guess u need a good ol cleeter sticker "TURN ON INTERCOOLER"🤣
@slammer1131
2 жыл бұрын
That RX7 is gonna 60 foot like crazy...
@JB-mk4ry
2 жыл бұрын
Love Brent chilling with a smile as others are arguing about tune changes. :)
@undertheinfluencegarage4361
2 жыл бұрын
Love having videos with Boosted Boiz, Jamie, Brent, Hayden and Cooper all together. Always makes them great to watch. And is that a Grand National at 20:13 I spy behind the bleachers?
@dielon8952
2 жыл бұрын
hope the cage is painted sad to see metiglous work all rusted up
@Avetho
2 жыл бұрын
'Round these here parts we say the page is cainted, mate XD
@SkatersOfTheNorth
2 жыл бұрын
You know damn well it’s gonna take 9 months and a bunch of rust before he even blinks at cainting the page
@Jason-3929
2 жыл бұрын
That freshly cainted Page 👌🏻👌🏻👌🏻👌🏻
@gabeaz7103
2 жыл бұрын
You know Jamie is old school when he still wears the dcs!
@classys-chassis6433
2 жыл бұрын
I only buy DC shoes gotta wide foot and they are great driving shoes just ask Ken block
@snowsheldon77
2 жыл бұрын
You mean he is not a hipster and a normal guy?
@flyingwolffilms
2 жыл бұрын
@@classys-chassis6433 they are big af there is no chance those are good driving shoes
@roger_hauer
2 жыл бұрын
@@classys-chassis6433 just ask founder of the company? 😂 well thats not biased at all
@dremoore9436
2 жыл бұрын
12:56 HOLY SHIT THAT THING SOUNDS ROUNDY AF!!!!
@atvplatinumcool
2 жыл бұрын
23:26 “cant on the padge”😭🤣
@BillStraub303
2 жыл бұрын
The aero mod was perfectly tuned, as the roof deflectors went down the hatch went up. Now caint your page!
@danssv8
2 жыл бұрын
Come one Whyatt get that truck going mate. My faith is in you
@The50Baker
2 жыл бұрын
Hayden: "That was boost cut.. I ain't pedaling, I'm gonna ride that shit out. I wanna feel it!" I love it! Great shit!
@pyrocl0
2 жыл бұрын
I'll watch
@atombomb232610
2 жыл бұрын
V.P. ELITE AUTO GLASS FTW!!! Dude knows what he is doing. I would travel to him if i had to have someone do my glass.
@GARAGEIdiotS
2 жыл бұрын
Let’s dip the valve cover, that’ll make the engine stronger 🤪
@craigkirkland
2 жыл бұрын
You can dip mine for free.99 Bubba. Love your channel also
@adrianwelgemoed9562
2 жыл бұрын
Dip gotta add 500hp alone
@silehpanda
2 жыл бұрын
Get all the boiz together each jump in one of your cars and have a race around freedom factory that would be dope.
@Mr21ghostman
2 жыл бұрын
Yeah boy!
@Tunosabesyomenos
2 жыл бұрын
The risk of wrecking of those cars ain't worth it
@nzgaming9512
2 жыл бұрын
@@Tunosabesyomenos they make enough itll be fine
@Tunosabesyomenos
2 жыл бұрын
@@nzgaming9512 you clearly have never own a racecar the amount of work it takes to get it to the point they are at is insane is not about money 😒
@SirVic42
2 жыл бұрын
@@Tunosabesyomenos There's also a huge difference between drag race cars and roundy-round race cars. Skinnies on the front don't like high speed left turns.
@JohnnyFabz
2 жыл бұрын
Love the way Hayden’s car came out😍😍🔥🔥 that things gonna be a ripper like the mr2
@MrDeroof
2 жыл бұрын
Paint the cage pink with the tiger print just like youre old valve cover 😁
@SethBergile
2 жыл бұрын
Duh
@keefespencer1173
2 жыл бұрын
Yes, I fully agree both you and Brent need stacker trailers and a toter and if you take your truck in for a 450 or 4500 series or bigger you can put a 5th wheel in the bed of it unless you get a stacker that is a tow hitch trailer you can "bumper pull " it but definitely with a Reese hitch and a Gen Y hitch for it with suspension built into it and it has like 3 or 4 different sizes of balls for the hitch and just a Gen Y hitch would help your 2500 pull your long open trailer
@Triple88a
2 жыл бұрын
Add simple sheet metal to cover the T-Top holes in the roof. One long piece of sheet metal should be enough. Also leave it without a dash. The lighter the better. Add some mounting tabs for the button panel and thats it.
@Broontango
2 жыл бұрын
Caint the page curse is real
@Chazileezy
2 жыл бұрын
It’s ya boy broooontangoooooo!
@CP_FPV
2 жыл бұрын
Kylie, it might be a good idea to make up a pre race checklist to put on or near the dash to try avoid any future mistakes like what happened today. I work in the Aviation industry, checklists are vital.
@jake3247
2 жыл бұрын
Kyle that guys a g keep him around for other windscreen stuff yaha
@young11984
2 жыл бұрын
I still laugh everytime you say something about cainting the page, you say it so fluid its like thats the only way your mind processes it😂. When i even try to say it i cant
@jordansrc8483
2 жыл бұрын
Kyle have you tried to put a time delay on the traction control curve, delay it for like 2.0 sec after launching? Don’t need traction control for the first 300’ anyway 👏👍
@willgotsch7292
2 жыл бұрын
honestly thats where you need tc the most... Not too many folks are spinning tires halfway down the track after a smooth launch. That would require a metric shit ton of torque
@RACINGCULTURESA
2 жыл бұрын
Kyle still on the caint the page thing 😂🤣🤣😭😭😭😭💀💀💀💀💀 gets me everytime, laugh so loud
@stevestumbaugh
2 жыл бұрын
Hayden had two tuners that could have helped him right there. Brent and Jamie could have probably fixed the mapping and he could have made some good passes.
@sirmonkey1985
2 жыл бұрын
he probably wants to learn it on his own but really with no baseline set all of them would of been in the same boat trying to guess the settings. he goes into more detail about it in his video he posted this morning.
@stevestumbaugh
2 жыл бұрын
@@sirmonkey1985Brent has taught a lot of people to tune and would be a great resource to get Hayden moving in the right direction. It all comes down to starting with the basics sometimes in where to start to get a good tune.
@4113N5
2 жыл бұрын
I’m sure everyone there would put their car on a dyno and get a base tune going before hitting the track. Don’t blame Hayden a bit.
@eugenekryzanaukas9385
2 жыл бұрын
Kyle get a hand button for when not welding aluminum. I weld sanitary stainless for a living you need one!! Hurts me watching you use that foot pedal on mild and stainless
@risingstar1309
2 жыл бұрын
Why does aluminum call for foot pedal and stainless / mild steel call for hand button?
@mattlandorf1595
2 жыл бұрын
@@risingstar1309 ali requires varying heat input, once the puddle is started u can lower and/or pulse the amperage as to not blow through ali as it gets hot very quick. Steel and stainless u can use a set amperage and just bang out dimes
@eugenekryzanaukas9385
2 жыл бұрын
@@risingstar1309 stainless and mild steel are much more forgiving. Aluminum is a tricky girl..
@eugenekryzanaukas9385
2 жыл бұрын
@@mattlandorf1595 we use our finger on a button, speed and pulsing for temp control on ss and mild. I’ve ran over 5km of 4” ss sanitary pipe this year at a dairy factory.. every weld bore scoped.. Aluminum and titanium is when he bust out the pedal. Hurts to watch him in car welding mild steel with a foot pedal.. I could set him up so nice..
@route222FAQ
2 жыл бұрын
That’s part of it but I’m proud that everyone is still positive and motivated!
@chrishiggins1811
2 жыл бұрын
V.P Elite auto glass need to have a sticker to be put on the MR2, gear work to Hayden from metigulous for getting the cage all sorted out. Can't wait to see more on the Mr2
@quickdeuce
2 жыл бұрын
@15:00 did you catch how hard Kyle's head snapped back taking his eyes off the road? Not a good scenario at all. They really need to get that seat amended to hold his head upright, eyes down range when the MR2 does it's violent launch.
@mistymoo5230
2 жыл бұрын
Mayby get some carbon fibre t-tops!
@Paul_Tomlin
2 жыл бұрын
You need to set up the ice box and slipper to be automatically engaged when you're on the 2 step.
@Wheemer
2 жыл бұрын
He'd need a completely programmable ECU to do that...
@fernandop937
2 жыл бұрын
@@Wheemer doesn't he already have that?
@Paul_Tomlin
2 жыл бұрын
@@Wheemer he has man.
@Wheemer
2 жыл бұрын
@@Paul_Tomlin Yeah I know, was joking...
@Paul_Tomlin
2 жыл бұрын
@@Wheemer oh sorry lol didn't see the ...
@snowysysadmin59
2 жыл бұрын
"hey i went faster than all yall!" "you also blew the hell up!" lmaooooo savage wyatt 19:59
@miketestani9707
2 жыл бұрын
Kyle and Wyatt you should wrap the doors in matching white wrap but leave your logo or name boosted boiz on the doors on each side so you can still see the carbon on the doors so that the logo is in real carbon and it would be like a reverse logo Its hard for me to explain what I mean but instead of wrapping the whole door in white leave your logo cut out in the white so your logo would be the bare carbon door underneath. I think somthing like that would look real good once you have the carbon roof and lexan windows. The car would look super clean and then you can come out with a new shirt once those things are done being the car would have a new look. I hope you find a nsx shell and do a full race like track build on it I mean a full drag build would be fast as hell but a pikes peek style build I think would push the channel to the next level justy like the jet boat and rotory will. Keep up the good work boyz
@andrewtravers7964
2 жыл бұрын
23:25 can’t on the cage? Lol to funny!!!! Keep it up.
@andrewpinney9023
2 жыл бұрын
Kyle: Idk why we blow so many engines. Also kyle and his tuner: 10:33 "So TuRn ThE bOoSt CuT uP"
@zorayinn
2 жыл бұрын
I love all the carbon fiber talk can’t wait🔥
@ALYangRSX
2 жыл бұрын
Love that windshield guy lol
@jacobshort4438
2 жыл бұрын
I love the fact of how far all you guys have come!!! Keep up the work and keep slaying the tracks!!
@kensmart5400
2 жыл бұрын
Love seeing you all together makes for really fun videos
@adamreynolds1851
2 жыл бұрын
Need to get one of those drag wings that Jamie got for the civic
@rlgearing
2 жыл бұрын
i feel like they should have the MR2 wrapped to match the NSX.
@chriscoralAloha
2 жыл бұрын
Great idea. Love to see that. 😀
@emoryjenkins6481
2 жыл бұрын
A white NSX would be better
@cleric670
2 жыл бұрын
Put two pole switches on EVERYTHING that needs to be turned on for a launch, then run your two step through the second side of all those switches in series. If it won't two-step you know that something isn't turned on.
@richardwillcoxson6177
2 жыл бұрын
Hayden did well to ignore the group peer pressure to turn the boost control up. Boys were heaping the pressure on 😂
@Zach-ku6eu
2 жыл бұрын
Old RX7GSL @13:23. Loved mine, but you're fighting the MR2 wheelie battle from before there even was an MR2!
@MrFlareone
2 жыл бұрын
Damn first mullet then leroy broke and now jamies car and the mr2..
@yutub561
2 жыл бұрын
Pour one out. Rough day, you'll get back to it!
@imdabeast100
2 жыл бұрын
It’s so good to see all the bois back working together in Florida for a little bit
@maxsinventions8913
2 жыл бұрын
I would love to see more hayden in these videos. Pretty cool seeing everyone back together.
@jaye696
2 жыл бұрын
It's at this moment he knew he farked up ....hahahahahaha
@youremom6349
2 жыл бұрын
Yes something to relax to when I get home from work, sucks you might have broke it looks like I'll have to watch and find out
@Brandon-by5mt
2 жыл бұрын
Ah classic dyslexic moment, didnt get our page all the way cainted, 23:24 or so. Love you kyle :)
@cjsaunders06
2 жыл бұрын
Man. The glass guy is such a vibe. Dude is awesome.
@chicagovasko
2 жыл бұрын
Hayden bro you get me fired up!! Once Brent said yeap... The argument was over.. too pumped high energy video. Hayden's a Champ mentality he got mad patience with progress.
@aleksagagovic1509
2 жыл бұрын
Active aero just killed me 😭😭💀
@The50Baker
2 жыл бұрын
So glad Jamie got away from the curse.. His Honda so much better than the neon
@Wheemer
2 жыл бұрын
😆
@ronseth1225
2 жыл бұрын
The cursed can be cured with a k swap hehehe oh wait hes was talking about k swapping the other neon
@rad87gn
2 жыл бұрын
Dang, that sucks the tranny broke! :( Your car is such a beast!! Can't wait to see it making another great run! Cage looks awesome BTW!
@keefespencer1173
2 жыл бұрын
For any of the races at the Freedom Factory with the Crown Vics Cleetus should put the DOT approved drag radial kind of tires that Nitto makes on the back of the cars and the step down from them on the front of the cars to give a little more grip in the corners and it would help when you hit the nitrous and just get a carbon fiber cowl hood and you won't have to worry about the cowl behind the hood at all because then you can take it off and get a cut to fit carbon fiber dashboard from Tim Mcamis and now you're going to have to put Optic Armor lexan with the braces and window locks along with that carbon moon roof you said you have on the way when you put that in along with all the other changes I said the car will be back down on weight and weld in a tubular front end and put weight tabs on it and inside the car and in the engine bay to scale the car completely that way you don't have to worry too much on wheelies and as for the engine lid get a sheet of carbon and make one keep taking weight out so you can scale it and put the weight where you need it
@standatskiy3976
2 жыл бұрын
That VP glass dude is good people!!
@imalec
2 жыл бұрын
Seriously good dude, 7.6 confirmed.
@DutchRoadrunner
2 жыл бұрын
Aahhh sh*t here we go again🤦🏼♂️😅
@thefrefdood4775
2 жыл бұрын
get some of the clear plastic from the top of the roof to the poiler all the way across, it should help air flow a lot.
@Ttvavvej
2 жыл бұрын
I wanna see some build videos of the van!
@uncomfortabletruth1548
2 жыл бұрын
@12:55, Hayden should've just rode it out.
@chicagovasko
2 жыл бұрын
Wyatt's truck is a beast tho can't wait to see an update on that. Hayden's Rx7 looks great. 👍
@trevordoeseverything219
2 жыл бұрын
The windshield guy needs to be on here more, love the vibe
@pepperfish_
2 жыл бұрын
Kyle's first launch looked like 90's kids trying to drag race a d15a sedan, takes me way back. Sounds like either the input shaft bearing or the diff bearing.
@balljointfd3s
2 жыл бұрын
That air flow out the back trunk shows that there is great airflow to mount the intercooler there. I'd imagine it's better there then under the trunk.
@deangelolawson6184
2 жыл бұрын
That trans tunnel being open gets me every time when you see the ground though the car
@gradybaby8309
2 жыл бұрын
the MR2 needs a small wing on the back... good aero and would look good
@kennanlynn4977
2 жыл бұрын
Already does wheelies wouldnt that just make it worse?
@bartleskeet1623
2 жыл бұрын
@@kennanlynn4977 not really. Wing won’t add down force till you get up and rolling. Won’t make much of a difference off the line but will add stability on the big end
@anesthetized7053
2 жыл бұрын
haydens car is so sick. what a beautiful build
@Hassasin195
2 жыл бұрын
Fun Fact, approx 5% wheel slip = maximum acceleration / breaking is what I gathered from my vehicle dynamics course
@SirVic42
2 жыл бұрын
Crazy stuff happens when SketchyVert hangs with the boiz.
@alexval4827
2 жыл бұрын
Now just need the interior painted
@andwooo9460
2 жыл бұрын
Agreed. The Pinterior needs ainted lmao
@Matty.Hill_87
2 жыл бұрын
If chop out the rest of the tunnel that's left, tidy it all up and then paint it and get it looming nice
@Matty.Hill_87
2 жыл бұрын
@@andwooo9460 I see what you did there 🤣🤣
@mikeyacullo
2 жыл бұрын
You getting alot of air under the car. Should try some kinda splitter low to the ground maybe go faster ahah
@dadadadankable
2 жыл бұрын
“Always a fun race to watch for sir”. Anyone else catch that from Kyle? Sounds like we have a new saying from Kyle like Caint the Page, “for sir” instead of for sure. Lol
@DitGaatFout
2 жыл бұрын
Nah
@eddominates
2 жыл бұрын
I was surprised Wyatt didn't call that out
@Andyp310
2 жыл бұрын
Them wind deflectors for the sun roof hold up pretty well. On hot days with sunroof open doing 140 (on the highway) in the mini you really cant tell...just noisy from the wind
@BJ-wo4mi
2 жыл бұрын
Gotta get some tops for it. They make some carbon caps for it.
@GickelsGaming
2 жыл бұрын
Kyle breaks his transmission so he doesn't have to race Hayden 🤔👌🤣🤣 #RacecarReasons
@jesussavescars807
2 жыл бұрын
That’s a blown diff for sure 1000%
@scotttod6954
2 жыл бұрын
Pretty sure it has a spool in it. But could be the ring / pinion gear that took the hit.
@FarmerFpv
2 жыл бұрын
Cooper the Spaghetti man! Watch out the dude is known for sabotaging intakes with meatballs. 16:29 Yeah Kyle, if it sounds like my 1937 Bailing Tractor, it can't be good, lol.
@loganjones9352
2 жыл бұрын
Listen abit closer at the very end when he talks about painting his cage 😂
@gustavocortes9199
2 жыл бұрын
Kyles face expression during the test drive is the same one i get everytime i drive my sh*tbox 🙂🙂
@TheMoparman94
2 жыл бұрын
Hayden needs to have KSR or Dr Tune em all tune the RX-7.
Пікірлер: 819