Thanks, Mike - it was great to see the process from soup to nuts. Love the result!
@MikePeaceWoodturning
Жыл бұрын
Thanks, a custom handle always feels best in your hand.
@glencrandall7051
Жыл бұрын
Why do we even buy handled tools? It's so easy to turn our own and they would be custom fit too. Thank you for sharing.👍👍Have a great Holiday and stay safe.🙂🙂
@OregonOldTimerWOODTURNING
Жыл бұрын
Another way to drive the tool into the handle is to bang the handle down hard on something solid. That way, you don't risk damaging the tool tip. Concrete floor works fine.
@Timber2Toothpicks
10 ай бұрын
I just watched your tool handle video. You did a fantastic job on this. Another well done and greatly appreciated video. I really appreciate your style of presentation. I did a handle extension for my Laguna 1216. Man oh Man did that help me out. I turn sitting in my wheelchair and anything that makes tasks easier or safer for me is excellent. You are a solid mentor and I am grateful. TS
@MikePeaceWoodturning
10 ай бұрын
Awesome, thank you!
@ian7583
Жыл бұрын
Hi Mike turned one to ur spec what a cracking little handle 👏 Ian
@MikePeaceWoodturning
Жыл бұрын
Excellent!
@jimbalz3017
Жыл бұрын
Nice! Tool handles are a project that keeps repeating. very useful
@MikePeaceWoodturning
Жыл бұрын
Thanks, Jim. Handles are basic and essential projects worth putting green spindle stock away for.
@stevehogg
Жыл бұрын
Thank you Mike!
@MikePeaceWoodturning
Жыл бұрын
You're welcome, Steve. Merry Christmas.
@jackthompson5092
Жыл бұрын
Great handle Mike.
@MikePeaceWoodturning
Жыл бұрын
Thanks. Jack. Merry Christmas.
@tomcoker9882
Жыл бұрын
Mike I hope the are more suitable/functional for you, in any case they look a lot better. Thanks for the video. Cheers, Tom
@MikePeaceWoodturning
Жыл бұрын
They really are. I think Sam Angelo is going to replace some of his.
@tomcoker9882
Жыл бұрын
@@MikePeaceWoodturning Mike, the hook tool you use for doing the female threads does need a longer handle, correct? Cheers, Tom
@MikePeaceWoodturning
Жыл бұрын
@@tomcoker9882 probably 10-12 inches for a scraper. Perhaps a little less for a recess tool.
@larrysmelcer7966
Жыл бұрын
thank for sharing your vidoes wanted to wish you and family merry christmas and happy new year .
@MikePeaceWoodturning
Жыл бұрын
Thanks, Larry. Same for you and yours.
@ian7583
Жыл бұрын
Sweet 😋
@jerrystark3587
Жыл бұрын
Turning new tool handles is both enjoyable and useful. Well done!
@MikePeaceWoodturning
Жыл бұрын
Thanks, Jerry.
@hfbowerndesigns810
Жыл бұрын
Great topic Mike. Merry Christmas and Happy New Years to you and yours Take Care Cheers my friend Harold
@MikePeaceWoodturning
Жыл бұрын
Thanks, Harold. You too.
@edwardchapman1914
Жыл бұрын
Mike.. tractor supply, look for collets near the 3pt hitch stuff. They are steel collets used to stop shafts from slipping off the face of a bearings. They have a set screw and make dandy replacements for pipe couplings. And best of all makes your tools quick connect.. I am on my third 1inch Carter and son skew on one handle using this setup. Best is they come in all sizes.
@MikePeaceWoodturning
Жыл бұрын
Thanks for the tip. I will check out TSC.
@jimellison3358
Жыл бұрын
Nice job
@MikePeaceWoodturning
Жыл бұрын
Thanks!
@deyyoung42
Жыл бұрын
Great point about not needing epoxy or glue. The wedging pressure of the wood fibers is more than enough, plus you can remove the handle without totally destroying it. Merry Christmas!!!
@MikePeaceWoodturning
Жыл бұрын
It took me a while to skip the epoxy
@theangrywoodturner9972
Жыл бұрын
Mike would an easier way to change the profile of the handle have been to insert the steel end through the chuck and tighten down on the Farrel and bring up tail stock suport. Turn to shape and finish? A lot less steps. But I do understand wanting different handle. Thanks for your tips
@MikePeaceWoodturning
Жыл бұрын
I think the tools too wide to fit the Morse taper. And the ash a bit coarse for the smaller features I wanted.
@theangrywoodturner9972
Жыл бұрын
@@MikePeaceWoodturning I see your point it would work if you could get the tool steel out of the handle... Thanks
@kenvasko2285
Жыл бұрын
I like the storyboard. Good idea. Nice video!
@MikePeaceWoodturning
Жыл бұрын
Thanks Ken.
@Boudreaux911
Жыл бұрын
Great video always Mike! Merry Christmas and happy New Year!
@MikePeaceWoodturning
Жыл бұрын
Back atcha Cory.
@briantaylor9266
Жыл бұрын
As always, a great video. The only thing that I do differently than you is to drill the hole for the tool tang before I turn the tenon. With the cone center in the hole, I'm guaranteed that the tenon will be concentric with the hole.
@MikePeaceWoodturning
Жыл бұрын
More than one way works.
@jeanlong4285
Жыл бұрын
Great little handles Mike.
@MikePeaceWoodturning
Жыл бұрын
Thanks, Jean!
@alanmullock381
Жыл бұрын
Great job Mike! Have a happy Christmas and New Year!👍👍👍👍👍👍👍👍👍👍👍👍😎😎😎😎😎
@MikePeaceWoodturning
Жыл бұрын
I do that on larger tools but did not think it would work with a tool this small. But certainly worth mentioning.
@eddieagha5851
Жыл бұрын
Love the shape of that handle! Hey Mike are you going to be at the AAW 2023 in KY?
@MikePeaceWoodturning
Жыл бұрын
Yes, as a participant not working the trade show.
@eddieagha5851
Жыл бұрын
Hope I see you there!
@briank4322
Жыл бұрын
Another excellent video Mike! Was the last step just wax on a buffing wheel? If so, what type? Thanks so much.
@MikePeaceWoodturning
Жыл бұрын
I put a couple of coats of minwax ao and buffed with beall buff after letting cure a couple of days.
@AlbeTurner
Жыл бұрын
Hi Mike, just finished watching your thread chasing video and I wondered how long it would be before you replaced those Sorby handles. 😃 Anyway thanks for another very useful video and one I've personally needed help with for a while. PS, I'd love to have that cardboard "Mike" to keep me company at the lathe. 😄
@Timber2Toothpicks
10 ай бұрын
I do have a question. On a video you did you made a round knob for a handle of sorts. Perhaps for a knock out rod? You used a texturing tool. Then did a veegroove on each side then burned a line. What texturing or chatter tool did you use? Last! You used a copper wire to burn the grove or line. Can you use different gauge of wires to burn lines? I was going to buy a burn wire kit. But at $50 bucks….. can I save $$ and use copper wire? Thank you. TS
@MikePeaceWoodturning
10 ай бұрын
Yes, a knockout bar. Texturing done with a Sorby spiraling tool. Guitar strings make the best burn wires. Know any guitarists?
@ericmoorehead1100
Жыл бұрын
Why do you need a ferule?
@OregonOldTimerWOODTURNING
Жыл бұрын
Ferrule keeps the opening from splitting out.
@MikePeaceWoodturning
Жыл бұрын
I have a video on just ferrules. Main purpose is to retain the tool if the handle breaks.
@ericmoorehead1100
Жыл бұрын
@@MikePeaceWoodturning thank you. I have moved to using inserts in handles to make them more interchangeable.
@Niemals_Anal-lena
5 ай бұрын
Wieso benutzt keiner eine Feile, ist wohl zu einfach.
Пікірлер: 57