So well produced and narrated. Well done. Best quality I have seen on KZitem.
@GlennLucasWoodTurner
9 жыл бұрын
Thank you very much John for your comment. Our picture quality has improved since this video with a superb new film camera. We keep striving to raise the bar for ourselves.
@jklphoto
9 жыл бұрын
Your excellence shows.
@MikeWaldt
9 жыл бұрын
Great video Glenn, I have had both your DVDs for some time now, and refer to them often, sometimes to check on technique, and sometimes just for the sheer enjoyment of watching you work at your passion. Take care Mike
@GlennLucasWoodTurner
9 жыл бұрын
Thank you very much Mike. I appreciate your comments.
@SMcCaskill
2 жыл бұрын
My mother had a wooden salad bowl for many years. When she used it she would clean it afterward and then lightly coat it with a cooking oil to prevent the wood from drying out. She loved using that bowl.
@mgorrow
9 жыл бұрын
Glenn, your video is excellent. It is a joy to watch you take effortless deep, heavy cuts.
@GlennLucasWoodTurner
9 жыл бұрын
Thanks Marshall, A sharp tool with the right shape cutting edge will do the trick kzitem.info/news/bejne/qGObuGuZbYB_emU
@thomashamiltom
4 жыл бұрын
I feel like this is production perfection... like this is the gold medal of the olympics... the gold standard! Now where do they go from there?? Hotels?? Amazing quantity!
@anklebiterwoodworks2818
8 жыл бұрын
Just found your channel from a few other turners here on KZitem. Very cool! Thank you for sharing. Love the shop.
@fredricksickelbower9431
7 жыл бұрын
One of your best videos. Thanks.
@UPwoodturner
7 жыл бұрын
Thanks for sharing, I was impressed with sharpening the bowl gouge.
@kplante7881
9 жыл бұрын
Great video. Beautiful work and love the music.
@ErikAnderson1
9 жыл бұрын
Amazing Video Glen! Your work always speaks for itself.
@GlennLucasWoodTurner
9 жыл бұрын
Thank you Erik.
@stevekrumanaker4582
Жыл бұрын
I have been fortunate enough to have taken two, one week classes with Glenn. It's hard to say that one class was more beneficial than the other because in each class I learned something, some insight, some thought process, some reason, something new every day. I would take another class from him in a heartbeat. I'd also like to add, like nearly every one else who has ever taken a class from Glenn, I consider him a friend.
@GlennLucasWoodTurner
Жыл бұрын
Thank you Steve for your kind comments.
@brandon2076
8 жыл бұрын
Such a tasteful and highly polished film! Feels like I'm watching a high budget Hollywood movie. Your channel will grow big for sure!
@scottclute9547
4 жыл бұрын
Thanks to you sir for your patient mannerism...
@anfearmor9616
5 жыл бұрын
Great video and beautiful work.
@BernhardHofmann
9 жыл бұрын
let's not forget the cost of all those tools and machines. lovely bowls.
@bellarchitects
9 жыл бұрын
Amazing craftsmanship...
@scottrebello805
9 жыл бұрын
Glenn is an amazing artist and a master at production. If you have an opportunity to take a class from him I highly recommend it. It was a great experience
@scottenglish5111
9 жыл бұрын
Incredible, I wish I could sharpen and handle my gouges like that
@CC-gv6us
4 жыл бұрын
beautiful video
@tmikeporter
8 жыл бұрын
Nicely done. You are very Irish indeed from your accent and I see from your website you're SW of Dublin on the other side of the Wicklows. Live there some 20 years ago on a work assignment. A highlight of my working career. When I return next to the Auld Sod, I'll need to look you up for a bit of instruction. Cheers.
@andreashiller8563
Жыл бұрын
Wonderful wood bowl. Great job. Greatings out Rheinhessen in germany.
@fishingwithbigL
9 жыл бұрын
I have your DVD's and highly recommend them to anyone who does woodturning..
@GlennLucasWoodTurner
9 жыл бұрын
Thank you Lamar. Glad you enjoy them.
@kssekur
9 жыл бұрын
Congratulations... I follow you with pleasure...
@Ragamuffyn
8 жыл бұрын
Counting all the bowls in that picture I calculated that if there is just one creator of those bowls is he is at least 5100 years old, although there might be more bowls we don't know of.
@alanwasserman8764
9 жыл бұрын
Great KZitem master Glenn. Anyone that does not have your DVD's is missing great learning, great music and photography. You mastered two of the three. I doubt you have musical skills but was smart enough to pick the right artist.
@GlennLucasWoodTurner
9 жыл бұрын
Thanks Alan, I am learning the piano. Getting there. :)
@Fred196407
9 жыл бұрын
So its a Pink wheel for sharpening. Having had a Coronet No3 for many years in storage I decided it was high time I had a play again. I had it given around 92 I think. I turned a Oak goblet in 96 as a little go on it before it went into storage. I was given some turning tools by another guy who picked them up at a car boot sale. I've been sharpening them on a fine grey wheel that came on my 8" bench grinder but thought it should be a white wheel, Glad I came across this video Glen. I've just turned another Goblet from a log I put in with the lathe bits back in 96. It looks well but I can't remember if its a Hawthorn bush or an Apple tree log from a tree I chopped down for a friend back then with the chain saw. It does look well however and was quite soft wood. Next I need to learn about sealant finishes as people who want them now want to be able to drink from them. I see I have some way to go and a lot to learn. Loving it so far and Yes! I should never have put it away for so long.
@GlennLucasWoodTurner
9 жыл бұрын
The wheel I use in this video is considered a ruby wheel which is the same in it's make up as white (aluminium oxide) wheels. A pink wheel is not suitable for woodturning tools as it is too soft. It is designed for tungsten tips.
@Fred196407
9 жыл бұрын
+Glenn Lucas Thanks for that Glen. Does that mean their is pink and Ruby wheels. I was thinking to myself that we used to use a Ruby wheel to sharpen our tungsten scribers we used to make from old lathe tip bits amongst other things like site masonry drills. I have a few new white wheels from a local engineering firm that went bust and a builder guy I know bought the building and told me to help myself. Some are really fine and some I'd say medium.
@GlennLucasWoodTurner
9 жыл бұрын
What you need is an aluminium oxide wheel which can be both white or pink/ruby. I tend to recommend that you buy them from a woodturning store and forget about the technical details other than grit size.
@Fred196407
8 жыл бұрын
+Glenn Lucas Ok. Thanks again Glenn. I've obtained a Book called "Woodturning. A foundation Course by Keith Rowley. Some good info in this as well. Many youtube vids to go by so I should be fine. I've fabricated some rests for the 8" bench grinder that I can tilt and lock and made a note of the degree's for each tool. Best of Luck to you Glenn and thanks for your reply's.
@peterstewart9376
8 жыл бұрын
That was fantastic!
@wtfkellen
3 жыл бұрын
This is great, i've always wanted to make a salad bowl
@joaou20cfepasa
9 жыл бұрын
this tool is very good in one log vc takes several tigela.parabéns the work.
@antonnovotny6873
9 жыл бұрын
Nice Work!!!
@mehmetedex
8 жыл бұрын
respect
@andrewnicolson1642
9 жыл бұрын
Great video, what oil do you use?
@I_M_Nonno
8 жыл бұрын
I was thinking "Oh well, just another Joe making a bowl video" until you freehand sharpened a fingernail gouge. Then it was "Ok, this guy has something to offer" Then the video kept on giving. I especially liked the bin to catch the shavings! Ha! Haven't seen that one before. And the vacuum chuck is pretty cool. What is the brand of the air pack you are using? The company that made mine went out of business. Enjoyed the video!
@ibrahimibrahim-px6yv
8 жыл бұрын
good work
@josegerardolopez4056
4 жыл бұрын
Como puedo conseguir el aditamento para hacer el tazón Gracias
@mhurlburt44
8 жыл бұрын
What sanding drill bit attachments? I'm looking to purchase some as I've just started bowl turning. If you can share a website that would be great. Awesome video!
@GlennLucasWoodTurner
8 жыл бұрын
There are lots of options out there depending on where you live but here is a link in the USA www.woodturnerscatalog.com/p/32/4418/Apprentice-Hook-and-Loop-Disc-Holder?term=velcro+sanding+pads
@shengmoey
8 жыл бұрын
Thank you for the inspiring video. Where can I purchase a bowl like this?
@GlennLucasWoodTurner
8 жыл бұрын
Thank you. You can purchase bowls from my website glennlucaswoodturning.com
@HenrikVollAtzen
7 жыл бұрын
Hi Glenn. thanks for a whole lot of useful info. a really nice video. But what is it you paint on when you have to dryness bowls. thanks in advance. Atzen Design
@alicewang7810
8 жыл бұрын
It's fantastic show, I wonder where to order the CD?
@GlennLucasWoodTurner
8 жыл бұрын
+Alice Wang Here is the link to buy any of my five DVDs. glennlucaswoodturning.com
@davidenglish880
8 жыл бұрын
what kind of lathe is that?
@GlennLucasWoodTurner
8 жыл бұрын
The blue lathe is a Vicmarc VL300 which I use all the time and the white lathe is a jet 4224B which I no longer own.
@ivwoodturningyt91
4 жыл бұрын
Hi Glenn, love your work.. what brand is the oil you use?
@GlennLucasWoodTurner
4 жыл бұрын
Ian Voss I use The Doctors wood shop and Mike Mahoney walnut oil.
@billphill5901
8 жыл бұрын
What is the name of the "bowl saving tool" and where can I get one?
@GlennLucasWoodTurner
8 жыл бұрын
This is the one I use made by Oneway Canada www.woodturnerscatalog.com/p/134/1513/Oneway-Easy-Core-System-Knife-Set
@cameronjames4239
4 жыл бұрын
hi glen me again I was wondering if I can purchase a couple of your small walnut bowl blanks to get started. thanks
@GlennLucasWoodTurner
4 жыл бұрын
Cameron Schmid It’s best to email your request info@glennlucas.com
@2mraid3r
4 жыл бұрын
Hi Glenn, I love your turnings and videos. Quick question: what is the face plate called that you use at 3:14? Did you have that made?
@GlennLucasWoodTurner
4 жыл бұрын
Lance Croft Thank you Lance. This is a home made device using a faceplate and spurs. This footage is taken from my bowl turning techniques download where you get a closer look glennlucaswoodturning.com/product/mastering-woodturning-series-no-2-bowl-turning-techniques-dvd-or-download/
@georgstrauss2309
9 жыл бұрын
Which settings do i need for the Bowl roughing gouge on the tormek ? It is exciting how fast you turn bowl. friendly greetings from Austria Georg
@GlennLucasWoodTurner
9 жыл бұрын
Thank you Georg. P65, Hole A and JS4.
@georgstrauss2309
9 жыл бұрын
Thanks
@georgstrauss2309
9 жыл бұрын
Which angle do you sharpen your negative rake scrapers ?I bought a normal scraper last week, but it is quite agressive. Georg
Пікірлер: 72