I found a guy in DFW that is willing to do it without warranty. Also, found an inexpensive replacement in case the rotors don't work out. So, turning rotors, if you take them off $80. Replacement Rotors, 15.4 inch, one piece tho, $400
@stevenaaron6889
Жыл бұрын
Where at bro I’m in dallas
@PurpleMonstaHellcat
6 ай бұрын
Any update
@jonsingleton203
Жыл бұрын
I was trained it's not the machining process that's hard it's the fact the slots are beveled and smooth on the edge and when your resurface it the grooves now are sharp and eat the pads super fast .
@jesseclifford4970
4 жыл бұрын
Would you know the torque specs on the bolts for the caliper for when I put the calipers back on for the front and the rear on a 2016 hellcat Charger
@PurpleMonstaHellcat
8 ай бұрын
bro… do mine! lol If anyone can do them for me I got a 6 pack of brew for them
@BMan100
4 жыл бұрын
What about replacing the Ring itself, I've seen them online for a pretty decent price, wondering your thoughts on that? I'm gearing up to pull the trigger on a SRT 392 in a few months so I want to have all my knowledge/pricing figured out.
@DFWSpeed
4 жыл бұрын
I need to take a look and see what’s out there now. Last I checked only girodisk had a option for a replacement rotor ring. Not sure it was compatible with the stock rotor hat
@BMan100
4 жыл бұрын
@@DFWSpeed I've seen a few out there, like from Speedlogixs, DBA etc. not from Brembo as of yet as I am still researching on my end.
@BMan100
Жыл бұрын
@@DFWSpeed Welp, now i'm in the same boat lol, but at least with the newer Rotors. Got a 21 Scat Pack with the Dynamic package, purchased a set of Paragon rotors and got them Geomet coated. Since OEM's are now like... oh dear 2+ Grand CDN. Also the Dealer seems to be able to turn down these new generations of rotors because of the lack of slotting, mind you they do it while it's on the car.
@birtbernard
5 жыл бұрын
Hi can you tell me the specs on the rotors so I can have mine cut, they wont cut them because they cant find the specs. Thanks.
@DFWSpeed
5 жыл бұрын
Bernard Birt I’ll see if I can find a spec tomorrow.
@DFWSpeed
5 жыл бұрын
Front rotor: new thickness (27.87-28.13mm) minimum thickness (26.5mm) rotor thickness variation (0.010mm) rotor runout (0.035mm) Rear New (9.87-10.13mm) Minimum (8.5mm) Variation (0.0004) Runout (0.0014)
@jrs329
6 жыл бұрын
👍
@unholygh0st
6 жыл бұрын
Hey man, my Hellcat is ticking from the front on slow right turn. Is this a characteristic of the 2 piece rotors? Thanks.
@DFWSpeed
6 жыл бұрын
Freethinkr it’s possible the pads are getting close to the limiters. I’d take the wheel off and inspect
@MaxxPainII
6 жыл бұрын
Try re-torquing your wheel, that's what the Dodge dealer did for me and it fixed it.
@unholygh0st
6 жыл бұрын
Yeah, actually just rotated tires and ticking is gone, so you may be right. Thanks.
@vegaswould
4 жыл бұрын
okay, what's that "leather looking strap" around the rotor vents for? why is that used for turning rotors?
@user-zb6ez4jl3u
4 жыл бұрын
So rotor won’t vibrate
@eptxm5664
4 жыл бұрын
Are you turning rotors for people that don’t need a warranty ? Interested in a quote for my HC.
@DFWSpeed
4 жыл бұрын
Hellcat Z we actually no longer turn rotors
@eptxm5664
4 жыл бұрын
DFW Speed ok thanks for the response
@FamilyMorenoSalmeron
3 жыл бұрын
@@DFWSpeed - Is there anyone in the DFW Area, who might be willing to work with customers (like myself) who are willing to take the chance. As in, no warranty, cash transaction? Most of us can't be spending a grand every year or other year on breaks and pads. When I got my SRT 392, I wasn't aware that the 2 piece rotors were a thing, so not I'm suck. I had a 4 piston challenger srt8 392 before and had no problem, now...now its a pain. Any help, would be appreciated.
@DFWSpeed
3 жыл бұрын
You can try Bruni motors in Fort Worth. My brake lathe broke and I sold it to him and he has it operational again.
@FamilyMorenoSalmeron
3 жыл бұрын
@@DFWSpeed Thanks
@brewable703
5 жыл бұрын
Where can I get the demon performance rotors at?
@shoobidyboop8634
Жыл бұрын
The gettin place.
@user-zb6ez4jl3u
4 жыл бұрын
Would this work with drilled rotors ?
@shoobidyboop8634
Жыл бұрын
Yes, but you have to fill the holes temporary by spot welding, then drill them out again when you're done. Alternatively, you can fill the holes with a soldering gun and solder.
@kelvinbrown4274
2 жыл бұрын
Not true at all, in fact had my hellcat rotors turned by the dealer more than once.
@MrMatthewHelm
6 жыл бұрын
Excellent work! Do you have issues with slots filling with pad material and causing uneven wear? I’ve got a few fairly bad lines that appear to be from material in part of the slots and it’s also cutting lines in the pads. I just went through all four rotors scraping out the slots which was a huge PITA. Trackhawk rotors that only have three partial slots per rotor side.
@DiegoHernandezLikesBikes
5 жыл бұрын
No local shop will turn my GL63 AMG rotors... ugh
@DFWSpeed
5 жыл бұрын
Bummer
@dub07odgecharger
5 жыл бұрын
Where are you located? And can you turn my rotors? I don’t need warranty
@DFWSpeed
5 жыл бұрын
My brake lathe is currently down
@dub07odgecharger
5 жыл бұрын
Are you interested in doing mine? If yes, then how much? Please and thanks. Once again I don’t care bout warranty. Kel.richey2333@gmail.com
@FamilyMorenoSalmeron
3 жыл бұрын
I found a guy in DFW that is willing to do it without warranty. Also, found an inexpensive replacement in case the rotors don't work out. So, turning rotors, if you take them off $80. Replacement Rotors, 15.4 inch, one piece tho, $400
@GashiBlood100
5 жыл бұрын
I’m considering doing this on my srt 392 how have your breaks been since you uploaded this video?
@DFWSpeed
5 жыл бұрын
It’s been awhile. They were great up until I got rid of it for the demon
@f14hellcat28
5 жыл бұрын
Can you turn mine
@DFWSpeed
5 жыл бұрын
Joseph Santos my lathe is currently down
@f14hellcat28
5 жыл бұрын
Ok I got a question for you what’s the difference between a one piece rotor and two because I found a company (Wagner brakes) that sells rotors for the Hellcat for 150 But it’s a one piece
@FamilyMorenoSalmeron
3 жыл бұрын
@@f14hellcat28 - should be fine, as long as they are the 15.4", and are set for the front.
Пікірлер: 44