Thanks! Great info and beautiful projects. #1 I use acid brushes on antlers and they work pretty well. #2 You might mention that you definitely want to use a dust mask when turning/sanding antler. It doesn't help with the smell at all but the dust coming off the antler is very abrasive/sharp and bad for your lungs! Take care, Dave
@carlwowens5504
8 жыл бұрын
Thanks for answering my comments Chuck. It really surprises me sometimes when I don't get one back. Most of you craftsmen are pretty nice about doing so. Have a great day Chuck.
@ITurnTwo
8 жыл бұрын
+Carl W Owens Thanks, the delay in this repsonse is because You Tube flagged your comment as possible spam and I did not see it until today. Thanks for watching have fun and be safe.
@markfuller9328
2 жыл бұрын
Cotton wool balls work well as they can get down easy in the groves
@turnstyles7485
3 жыл бұрын
The fresher an antler is the more vibrant the colors in the marrow. Whitetail marrow can be purple. It is also far less brittle when fresh. Don't neglect to wear a respirator and do the sanding outside if possible. Antler dust is nasty toxic stuff.
@alexiacullo3586
8 жыл бұрын
Great Job ! Learned a great deal. Especially timely since I am about to turn my first antler pen using the PSI deer kit. If all goes good I will try and cut plank to show more of the outside.
@ITurnTwo
8 жыл бұрын
+Alex Iacullo Thank you for watching and for the kind feedback. There are lots of great opportunities with antlers, I am sure you will enjoy it.
@fouroakscrafts7240
6 жыл бұрын
I love your tips! I have made several projects with deer antler. I love the idea of keeping the "bark" on to really show the character of the antler. I look forward to checking out your other projects.
@carlwowens5504
8 жыл бұрын
Sign me up also Chuck. I haven't turned any antlers as of yet but would love to get started on some. Sounds kool. Great looking pieces and I agree with saving the crown.
@ITurnTwo
8 жыл бұрын
+Carl W Owens Thank you for the feedback Carl. You are signed up.
@oaksho
8 жыл бұрын
Excellent and very enjoyable video Chuck, both projects look great. I think I will have to give my next antler pens a bit more thought before cutting the blanks. All the best Tony
@ITurnTwo
8 жыл бұрын
+oaksho Thanks for the kind words. You are entered for the antler give away.
@rogerarseneau1639
5 жыл бұрын
Thank you for sharing , Best wishes ,have fun from Canada
@orelygarcia
8 жыл бұрын
Nice cutter handle and bolt action pen. That would be the perfect gift for any hunter. Good Video loaded with good information, Thumbs up.
@ITurnTwo
8 жыл бұрын
+OG Timbercraft Thank you, I appreciate the kind feedback
@TheLittleGardenShedWorkshop
8 жыл бұрын
Hi Chuck, thanks for the video, and great information and lovely projects mate, Thank you for sharing Best wishes Harry
@ITurnTwo
8 жыл бұрын
+The Little Garden Shed Workshop Thanks Harry, I always appreciate your positive support. be safe and have fun.
@tango-bravo
8 ай бұрын
Bravo!
@cboutdoors9120
5 жыл бұрын
Really like your antler projects! I would do more this them if the smell wasn't so bad! I dont know why but I just cant do the smell, especially when cutting on the bandsaw. Great video!
@Troy_Campbell
8 жыл бұрын
Great video, thank you for all the useful information, I look forward to working with some antler soon!
@ITurnTwo
8 жыл бұрын
+Troy Campbell Thank you for the encouraging feedback.
@SCCFORUM
8 жыл бұрын
Great looking Items. I really liked the look of the pen Thanks for sharing.RegardsPaul
@ITurnTwo
8 жыл бұрын
+SCCFORUM Thanks for watching Paul. Every now and then I catch a break and and I get a project that comes out like I hoped. Have fun and be safe.
@suppelito
6 жыл бұрын
Damn, that elk antler.
@carlwowens5504
8 жыл бұрын
THANKS CHUCK FOR IMPARTING YOUR KNOWLEDGE ON TURNING ANTLER PIN AND THE PIZZA CUTTER. I CAN SEE THAT I'VE GOT A LOT TO LEARN; BUT I GUESS THAT WILL COME WITH LOTS MORE PRACTICE, HUH . THANKS AGAIN AND KEEP UP WITH THE VIDEOS , OK ?
@ITurnTwo
8 жыл бұрын
+Carl W Owens Thanks for watching Carl. Have Fun and share a post when you finished your next antler project.
@DrFrige
3 жыл бұрын
So glad I came across this video. I was about to do my first antler pen and learned a lot from you. Thank you for the great tips! I bet I would have destroyed it if I didnt see this first.
@paul.teatroteatro8669
5 жыл бұрын
Try acid or chip brushes, they are pretty good at spreading paint and do not cost much
@noed.martinez9358
6 жыл бұрын
Great info. Thanks
@jimcindrich6254
6 жыл бұрын
Try what is called acid brushes - really inexpensive at harbor freight
@lfabich
4 жыл бұрын
Where did you get the pizza cutter blade? Nice Job!!
@johncbrownmd
8 жыл бұрын
Chuck I agree that you need some of the outside bone with texture which I fill in with super glue - something to set it apart from other materials and you see this design in the PSI and other catalogues.
@ITurnTwo
8 жыл бұрын
+johncbrownmd thanks for watching and for the feedback
@robertcornelius3514
8 жыл бұрын
I don't hand out too many compliments, but you did a professional job. Just by chance have you turned anything out of Spectraply?
@ITurnTwo
8 жыл бұрын
Thanks for watching and for the kind words. Have not done anything with spectraply yet, but will try to work some projects in the not to distant future.
@prepperjonpnw6482
6 жыл бұрын
Ok I spoke to soon lol. What is that clear stuff you put on at the end? I want to make a few things out of some antler that I have but know almost zero lol so yes I need help! Lol
@ITurnTwo
6 жыл бұрын
I put a few thin coats of a CA glue.
@kylegreening1040
4 жыл бұрын
You can also contact us at wild chewz we have plenty of antlers all species
@prepperjonpnw6482
6 жыл бұрын
Do you have to treat the antler with anything? Do you have to stabilise it or spray it etc?
@ITurnTwo
6 жыл бұрын
You do not need to do any preparation with antlers before turning.
Пікірлер: 41