Excellent video with great tips, especially the one of putting the fat marker’s tip in hot water to avoid dry tip!
@ApikLiew
3 жыл бұрын
Bruhhh soo nice. Simple n educated video!! Keep up for more content bro👍👍
@gtcgunpla
3 жыл бұрын
Thanks bro! :) I will
@chriswong1615
10 күн бұрын
Wanna know When to use gundam marker and when to use Tamiya Accent line? 🙏🏼
@rayadinataroom8303
3 жыл бұрын
thank for sharing sir
@gtcgunpla
3 жыл бұрын
no problem boss :D
@frankiephan-chu4714
2 жыл бұрын
the white balance is really off my friend, its very difficult to read your text over but easy enough to follow by just simply watching! just a tip for future vids =)
@gtcgunpla
2 жыл бұрын
Alright, this is noted bro. i will put a dark outline on my text next time. I appreciate your concern.
Bai animal nakoratan kos imo comments pero salamat hahaha cebu ka boss?
@jedapas9355
2 жыл бұрын
Ou brad. Nag tan aw ra kog mga tutorials daan kay dugay kaayo e deliver ni shopee akong first gunpla
@gtcgunpla
2 жыл бұрын
@@jedapas9355 bai karon palang congrats, welcome to gunpla community, iapil tika sa akong vlog 2days from now. Unsa na gundam imo first na i-build? Sakto gyud imong gibuhat same nako before na wa pako alam sa gundam cgi rako tan.aw tutorial until ma master ra gyud nimo tanan.
@jedapas9355
2 жыл бұрын
@@gtcgunpla salamat brad. Bale ang akong gi order kay Strike Freedom MG na standard tungod sa nostalgia. Pero ayaw lang ko e apil sa vlog unless if e mention lang ko nimo. Busy kaayo ko gud hahahahahaha. Nag duha2 pa gae ko if mahuman ba jud nako to ug build.
@gtcgunpla
2 жыл бұрын
@@jedapas9355 uu mention. Anyway it takes time to build kay dagham kaayo parts tungod sa wings. Basta goodluck make sure gamit kag hobby knife para dili ka maalanganin mg transform.
@mattxstarx
2 жыл бұрын
Great video!
@gtcgunpla
2 жыл бұрын
Thank you very much. 😁
@artstunning9649
2 жыл бұрын
hahahahah thanks sa tutorial :)!!! labi na sa "hamis pas imong ex" hahaha katawaa nako oi:) LOL just started my Gunpla pinaka Basic gyud akoa RX 78-2 ang OG :) Wala pa nako gi upload sa channel.
@gtcgunpla
2 жыл бұрын
RX 78-2 OG a.k.a "BIG DADDY" bro haha cgi support ko imo channel. Thanks for watching bro, by the way subscribe tika para kita sad ko sa imo mga iupload. 😅👍
@artstunning9649
2 жыл бұрын
@@gtcgunpla THanks a lot bro :) ato sad e-invite ang mga Gunpla buildings sa atong channel para happy ta:) asa ka nag base ron naa ka sa Gawas or Pinas ?
@gtcgunpla
2 жыл бұрын
@@artstunning9649 gnahan ko ana imo idea bro, naa ko gawas bro. Trending ang gunpla sa thailand. Mag out of stock na gud ang mga bag.ong maabot, wa gani ko gadahom nga nag banaw mga shops diri. Ikaw asa ka?
@gtcgunpla
2 жыл бұрын
@@artstunning9649 do you know bro, nag sugod ko last year with 19subs, and since ganahan gyud ko gundam naa ray mga tao nga nag cheer up na mag upload ko then sayang sad if d nako ishare akong gundam.. wa ko nag expect mudaghan ang views so nag padayun ko. hapit nako mag monitize pero gamay pa akong subs.. upload ta bro.. for sure managhan sad na imo viewers.
@artstunning9649
2 жыл бұрын
@@gtcgunpla Yup bro upload ko next week. I think ako nlng e solely Gunpla ang ako channel kay medyo daghan ang viewers gyud tungod sa Gunpla builders and fanatics.heheheh. ug daghan kapilian ang Gunpla sad nya daghan grades.Naa nakoy pundo na mga kits pero wala pa nako gibuild kay wala koy time limit kaayo.every weekend ko makalugar plus add pa ang time sa pagedit sa video.anyway I'm glad nagkaila ta hehehe.
@shibapatrol801
2 жыл бұрын
Ohh so that's why I couldn't clean up the panel lines with my Tamiya thinner. I was using the X-20A which is Acrylic thinner and not the X-20 enamel thinner, oops lol
@gtcgunpla
2 жыл бұрын
yes bro... enamel and acrylic are different
@angiekho1308
3 жыл бұрын
idol kaayu ang edit!
@gtcgunpla
3 жыл бұрын
Syempre, naman hahaha lamat gie
@AGxProductions
2 жыл бұрын
Good vid... Panel lining on your "blue wings" weren't vry neat, but U can clean it up easily with a few thinners-based solutions.. Othrwise - not too shabby Bruh.
@gtcgunpla
2 жыл бұрын
I know right. After i cleaned it with thinner i polished it so it may look glossy but I didn't include it on my video. Anyway, thanks for watching man. 😁
@AGxProductions
2 жыл бұрын
@@gtcgunpla I would like 2 see it!
@lansereyes835
2 жыл бұрын
Can you use alcohol as a thinner
@gtcgunpla
2 жыл бұрын
I am not sure bro, I haven't tried.
@stevekevin7549
2 жыл бұрын
san ka po nka bili ng Metalic Grey model pen (real touch, fat end)?
@gtcgunpla
2 жыл бұрын
Thailand sir.
@werdxua1989
2 жыл бұрын
IDOL CUSTOM BUILD TUTORIAL NAPUD
@gtcgunpla
2 жыл бұрын
Natural hahaha
@gtcgunpla
2 жыл бұрын
Drew naa ko Deathsythe Hell ENdless waltz, ako ni hatag nimo kung interesado ka
@werdxua1989
2 жыл бұрын
Super nova? Naa ko ana og heavyarms nus.a man ka uli pinas?
@gtcgunpla
2 жыл бұрын
@@werdxua1989 uli ko pinas unta karon, pero lockdown man manila extend ko ambot when ko mauli, nindot heavyarms drew, unsa imo katong pula? Or blue green?
@Miltonpe88888
2 жыл бұрын
Bro put some topcoat before you apply the tamiya panel line because if you apply tamiya panel line without topcoat the plastic will crack and brittle
@gtcgunpla
2 жыл бұрын
Are u sure? Bro, i have 12 gundam kits here but non of them got crack or brittle. Tamiya panel is safe for plastic especially on gunplas. We never experience about that issue. What happened to your kit? if you don't mind.
@Companion.23
2 жыл бұрын
@@gtcgunpla It isn't the Tamiya Panel Liner that will cause your gunpla to become cracked or brittle. It's the thinner. Enamel thinner can cause micro fractures and stressing on bare plastic as well as eating away at the plastic. The only way to avoid that is to first put a top coat (preferably gloss) over your gunpla before using any enamel thinners. Most of the time you won't see the problem until it's too late.
@willmoldrich6272
2 жыл бұрын
@@gtcgunpla it happens quite a lot man
@gtcgunpla
2 жыл бұрын
@@Companion.23 i don't think so bro, tamiya enamel thinner is made and safe to use even with a very low class of plastic material. No matter how many thinners you put in it bro. I am using tamiya enamel thinner FYI. All of my gunplas were safe even sometimes i over use the thinner 😂 I don't use other class or kind of thinner. I never experienced that yet.
@asurajeff6316
9 ай бұрын
I think if the thinner is the reason why gunplas crack, can try use lighterfluid (zippo brand is gd) i heard that lighterfluid does not damage the plastic while still removing those accent panel lines
@charlesdotterman4580
2 жыл бұрын
Do not use thinner on bare plastic it will ruin all your hard work. It will break \ crack .
@gtcgunpla
2 жыл бұрын
But mine doesn't. I know tamiya enamel thinner are made/designed for Tamiya kits not for bandai but I even did it more than 10 of my gunplas but i never have an issue. When i use the tamiya enamel tinner i always make it sure that it has a small amount of it on the cotton buds.
@asurajeff6316
9 ай бұрын
@@gtcgunpla bruh i think ppl must be using too much accent or too much thinner and leaving it on for too long resulting in plastic breaking, would you agree on that?
@gtcgunpla
9 ай бұрын
@asurajeff6316 nope! 👎
@lockecole6220
3 жыл бұрын
pretty obnoxious music but thanks for the tips
@gtcgunpla
3 жыл бұрын
Welcome sir :)
@nathanreddent2427
2 жыл бұрын
Sounds like games without frontiers “petter Gabriel
Пікірлер: 57