Hello, guys!
Today, I will show you the tutorial of firmware update for Flipsky-ESC-Tool V1.0
Follow these steps:
1. Connection
①. Connect the ESC to the battery
②. Connect the ESC to the computer via USB
2. Operation
①. Double-click the Flipsky-ESC-Tool V1.0 and click "Connect" to the ESC
②. Notice will appear if the firmware needs to be updated.
③. Click "Enter bootloader" and "Yes" to enter the Bootloader mode.
④. When the ESC red LED blinks at a fixed frequency, it means entering the Bootloader mode successfully.
⑤. Click "OK" and "Connect" to reconnect the ESC.
⑥. Click "Start Flashing" and "Yes" to update the firmware.
⑦. When the ESC's green and blue LEDs are solid after the blinking of red and green LEDs, it means the finish of the firmware update.
⑧. Click "Connect" to reconnect the ESC.
Follow Us On Social Media, thanks!
/ flipsky_tech
/ flipskytech
#flipsky
#escs
#diyesk8
#flipskytech
Негізгі бет Автокөліктер мен көлік құралдары Tutorial of Firmware Update for Flipsky-ESC-Tool V1.0
Пікірлер: 1