Thank you for all u do. I tried to see but my needle wasn’t going down, pls what could be the problem 😊
@CUIHEANACHOGLOBALFURNITURES
Жыл бұрын
Thank you for the update, pls sir can you take us on how to do timing on my emel industrial sewing machine. Tank you. God bless.
@alukosewingmachines3782
Жыл бұрын
Ok I will work on that probably before this week runs out or fist thing Monday morning
@reginaakomolafe8819
3 ай бұрын
Thank you for the demonstration. I use Jaktec machine, i noticed it just stops working when i turn it on wont move at all. Then it start to smell after a little time .I have to leave it for a day to start working again
@reginaakomolafe8819
3 ай бұрын
Could the clutch be the issue ?
@speaklifetothem2412
8 ай бұрын
Thank you for the video. I use direct drive and the tension area is not the same a this one. I don't seem to know how to loosen it. My machine is stitching in loops underneath.
@alukosewingmachines3782
8 ай бұрын
It’s should be the same but please message me on my WhatsApp to I can assist you on it.
@amandatebowei1861
5 ай бұрын
Greetings, please my newly bought two lion machine is stiff on the handwheel and it's not moving when I match the pedal, what can I do?
@alukosewingmachines3782
5 ай бұрын
Check my video on how to unfreeze.
@alukosewingmachines3782
5 ай бұрын
And it you fell that is not what the problem is message me in WhatsApp please
@ogheneruemuonotu7898
3 ай бұрын
Please can u do a video on how to set the oil gauge of the industrial machine
@alukosewingmachines3782
3 ай бұрын
Ok we will work on that
@GabrielAdeyemo-ux9su
3 ай бұрын
Sir please my industrial machine if I am sewing out will be gushing out from under the plate I mean from the short hool to the needle pls what the problem@@alukosewingmachines3782
@ruthumoh9497
5 ай бұрын
Good afternoon. Please my emel keeps sskipping thread when sewing some fabrics. I have changed the needle to db16 and db18 but its the same issue
@alukosewingmachines3782
5 ай бұрын
Check my video on how to sew any materials
@ruthumoh9497
5 ай бұрын
Thank you. Tried it and it worked. I really appreciate it
@williamsajayi7716
11 ай бұрын
Thank you Boss
@efahlionelefah3110
3 ай бұрын
Make a video on how to do different sewing designs with ont4 EMEL machine, show how to manipulate the different parts to get different designs
@alukosewingmachines3782
3 ай бұрын
Sorry sir the main purpose of Emel 8500-8900 is for chain stitch which we call straight sewing. You will need additional or an attachment to add other functions to it
@adeapperels219
7 ай бұрын
I unfreezed my machine but the needle keep hitting the rotary hook . What shall I do ?
@alukosewingmachines3782
7 ай бұрын
You did not finish the process of unfreezing
@user-un6xf9xs2e
9 ай бұрын
Pls what causes the machine to suddenly become so noisy? Emel direct drive
@alukosewingmachines3782
9 ай бұрын
Please message on WhatsApp and send a video of the machine working so I can know where the sound is from
@chiegeonucelestina9849
Жыл бұрын
Thanks so much ... I appreciate this video . Please my machine is direct drive two lion. In my area we always have low current which can't carry my machine nd I'm always using power surge or guide before sewing. But once the light goes low, the machine would say erorr E-02. So my question is can i use a big stablizer to help increase the low current while sewing?
@alukosewingmachines3782
Жыл бұрын
Use it ma But with the power surge
@chiegeonucelestina9849
Жыл бұрын
@@alukosewingmachines3782 Thanks a lot sir.. God bless you
@Victoria-mg5fk
Ай бұрын
My machine is cutting thread when I sew please what can I do please
@alukosewingmachines3782
Ай бұрын
Check my video on it I have one
@anuoluwamudasiru
Жыл бұрын
Thanks for this❤️ Just gained a subscriber . Please what’s the needle i can use for brother’s industrial machine?
@alukosewingmachines3782
Жыл бұрын
That’s for subscribing. Please do share and with your fellow Designers Needle DB 16 or 18
@Blackskinnn
Жыл бұрын
This is exactly the sewing machine I am using but the back thread is loose . I’m thinking it’s the bobbin but I don’t know why to do
@marthabobb7936
Жыл бұрын
Thank you for that demonstration what size belt for a wimsew industrial sewing machine and a belt for the kansani overlocker ks021669z industrial machine and how can l get the pdf instruction for them downloaded thanks
@alukosewingmachines3782
Жыл бұрын
Thanks for watching Sewing machine belt size is either 40 or 42 while overlock is 38. Check my video on how to reduce industrial sewing machine speed you can easily get how to insert the belt
@cynthiachiamaka4752
Жыл бұрын
Hello Thanks for this video ❤Please I need ur help ,my industrial machine stitches is not tight and I’ve set it to number 2,it was in 3and half initially then I tried to turn it and it’s too hard so I loosed and tighten it bck but now even if I put it in liner 1 the stitches will still not be tight .:.please what can I do
@alukosewingmachines3782
Жыл бұрын
You will do these in steps 1. Turn it to 2 2. Loose the nut 3. Turn the plastic to 5 4. Tight the nut 5. Turn it to the point where the machine Stich is not moving again( these might be on any number) 6. Loose the nut and turn it to zero. 7. Tight the nut
@pauliroha5506
Жыл бұрын
Thanks so much please how often can i service my machine?
@alukosewingmachines3782
Жыл бұрын
Any time
@TGVcrafts
11 ай бұрын
Weldone sir,I use two lion industrial sewing machine, the needle hit an heavy metal while sewing on speed, so it got broken and I replaced the needle but couldn't connect with the bobbin thread and I've tried all possible best but yet not connecting with the bobbin thread, what do I do sir
@alukosewingmachines3782
11 ай бұрын
WhatsApp please
@ruthredeemed8129
Жыл бұрын
Sir please I would like to know how to tension my thread according to thickness of the fabric
@violaflora9311
Жыл бұрын
Pls sir my new emel is always packing thread under. Even when I thread well and the shuttle is well fitted
@alukosewingmachines3782
Жыл бұрын
Check your machine tension. And did any needle brake recently?
@ijeomaijehadepegba4780
Жыл бұрын
Sir, I wish I could subscribe to your channel 200 times. Pls I want to know what the white switch with on/off on the two lion industrial machine is for?
@alukosewingmachines3782
Жыл бұрын
It’s for the Light
@VictoriaCharles-vq3dj
Жыл бұрын
Please my motor is making serious noise what can i do
@alukosewingmachines3782
Жыл бұрын
Record the sound and send it to my WhatsApp
@user-tv1qg1dk6e
11 ай бұрын
Can I do this to tenjoy machine
@alukosewingmachines3782
11 ай бұрын
Yes You can
@user-tv1qg1dk6e
11 ай бұрын
I have tried all I could on my machine to reduce the speed but all to no avail. But I noticed it 90MM. What can I do please? Thanks so much sir
@alukosewingmachines3782
11 ай бұрын
Gett a small pulley for it
@ruthredeemed8129
Жыл бұрын
Please sir ,I would like to know how to tension my thread according to the thickness of a fabric
@alukosewingmachines3782
Жыл бұрын
I will try and work on this sooner
@michellechevannes4175
Жыл бұрын
Blessings dear how to put on a industrial sewing machine belt just bought a singer 120u
@alukosewingmachines3782
Жыл бұрын
Flip the machine and put the belt and Incase the belt is check check my video on how to reduce Industral sewing machines speed
@michellechevannes4175
Жыл бұрын
@@alukosewingmachines3782 ok will definitely try when I go home
@michellechevannes4175
Жыл бұрын
Blessings it went on
@michellechevannes4175
Жыл бұрын
Now i can't string it the thread constantly bursting
@alukosewingmachines3782
Жыл бұрын
@@michellechevannes4175 sorry i can’t get you. You mean the thread is cutting?
@user-sw9pl9dx9q
Жыл бұрын
Please my emel machine handle is stiff, i cant move it forward or backward and when i put it on, once i step on it to sew, the handle will stiff and the machine will go off but if i remove my leg from it, it will on again... Please what can I do to solve this problem?
@alukosewingmachines3782
Жыл бұрын
Check how to unfreeze Industral sewing machine
@user-sw9pl9dx9q
11 ай бұрын
@@alukosewingmachines3782 thanks for replying. But where and how can I check how to unfreeze it? 🙏
@alukosewingmachines3782
11 ай бұрын
Check my page it’s there Or give me a WhatsApp call 08174520114
@pretty13280
Жыл бұрын
pls help oooo, my shuttle handle got broken, am unable to remove the shuttle
Пікірлер: 71