"you want to be careful because-" "ow." "the edges are really-" "ow." "sharp."
@NugeFireball
4 жыл бұрын
Tks, just thrifted a 35 drum that appears to need a new spring. Nice to know that there are replacements available.
@Ravetrooper
9 жыл бұрын
If I wasn't trading my only drum magazine right now I'd buy one of these from you :)
@ERoserie
2 жыл бұрын
I just found this video in 2021. Thank you so much! I picked up 9 used drums and some of them can use new springs. I'll hit up the website. I need to be able to reliably NERF my nephew and nieces.
@bigemugamer
7 жыл бұрын
NICE!! just received the 35 drum 3 days ago 4 days after receiving the re skinned rayvenfire, awesome mod, would love to see worker mod create a replacement magazine length that goes into the slot with something 12 darts long or angled to make to more balanced like the 25 round drum, i would TOTALLY buy that so as to make it easier for right handed people to use the drum with a rayven(fire)
@FoamBlast
7 жыл бұрын
Drum Springs are available again! foamblastshop.com/product/nerf-replacement-drum-spring/
@mattvonnerf3495
6 жыл бұрын
I installed the new spring according to the videos, admittedly it was a little fiddly at first, but I got it around the 25-drum over twice and got it around the spool inside the mag, but now it won't feed properly and the follower gets stuck about 8-12 darts in, and reqires the dial on the back a little jiggling, then after that a few times I can load the mag. Howevwer, when it comes to firing, it jams all the time and the follower gets stuck, except for the last 6 to 10 Darts that it just spews out easily. Like I said, I watched Adrianna's installation videos carefully, pausing to check things, as well as taking my own photos before to help me out, but it still sticks, even with greasing the pin, leaving a gap of 4 or 5 darts in the drum or just bending the dart if I turn the dart reset dial (which I have to every 2-3 darts). Any Idea what the problem could be?
@FoamBlast
4 жыл бұрын
@@mattvonnerf3495 Check all of the moving parts of the follower. Sometimes the little wheels have flashing on them and need to be sanded down. Also, lubricate the drum's center shaft. Hope this helps!
@lindanorby3140
7 ай бұрын
This was very helpful, as I didn't notice the 2 round discs, and they fell out when I unscrewed the top. Thanks!
@Arnatuilify
4 жыл бұрын
Exactly a video I was looking for. Didn't remember how to put the moving part in the circular/star-shaped dartholder
@baddogrc51
6 жыл бұрын
Thanks for the video. We took our drum apart and couldn't figure out where the orange circles went. Very helpful
@tobywarpup100
2 жыл бұрын
Absolute pain to do this. Lost part to spool due to spring wanting to unwind. Somewhere in my workshop, over it and in the trash. So much aggravation to this, sucks bought 5 of these springs.
@Ender28Handle
Жыл бұрын
My hyperfire drum is jamming all the time. So this is probably a great selution. Sadly i cant find springs for it.
@MattVonGrimm
6 жыл бұрын
+FoamBlast Adrienne, have you tried using Oakley goatskin gloves? They are thin enough to have feel and be grippy but stop you getting cut, win-win. Thanks for the video though, it's really useful, like your other videos, I even bought two of the exact type of spring from you today! Shoud be much easier to install with your tutorial. Awesomeness. Love you guys, great customer relations and great products from some awesome people, plus really good, informative videos! Just waiting for my order to arrive, then it's like another xmas.
@kittenclaws5775
7 жыл бұрын
Feed the spring between chopsticks and just pinch the chopsticks together and draw the spring out around the drum so you don't have to fight it as much.
@Ganthegamer
Жыл бұрын
Found a better way to put the springs on instead of feeding it you can just remove the cover that houses the spring
@ytharemking6835
5 ай бұрын
I can’t figure out how to get the spring to the spool of the magazine with the pliers. Please help.
@pans223
6 жыл бұрын
Where abouts do you feed the spring onto? The back of the spooll could you possibly upload another video showing that
@FoamBlast
6 жыл бұрын
We made a Part 2 with more closeups of how everything latches together. You might find what you need there. kzitem.info/news/bejne/q2ylp4eDsnZodaA
@nafnnerf6486
5 жыл бұрын
Haha I’m just watching old nerf videos and I see you’ve had the Mohawk forever.Time to spike it up
@mattvonnerf3495
6 жыл бұрын
I still need to fit my drum springs..... Too busy thinking about moving house and modding my ECS-10. Great video as usual, is it the same method for the 25-dart drum mags?
@adamcikowski8438
8 жыл бұрын
please let me know how I can order the springs. I need several.
@brokcen2748
4 жыл бұрын
From foamblast shop
@jmr_james
7 жыл бұрын
Does anybody ever have problem with the 25 dart magazine like the darts don't go to the top of the magazine
@advikbhagat2948
3 жыл бұрын
Thank you so much 😊, I am so thankful to you , but I want replacements of all the things 🙁
@atlasunit22
2 жыл бұрын
thank you for this info
@acer48ace
7 жыл бұрын
Are these ever going to be offered on foamblast website. I would love to buy some.
@FoamBlast
7 жыл бұрын
We're still trying to source a new batch. We've recieved samples from multiple companies and the quality is not passable. We're waiting on samples from a new company right now. We hope to have them within a few months. Sorry for the delay. The original manufacturer jacked up the price and the minimum order quantity went from 100 to 100,000.
I too would like to purchase 6 of these springs from you
@jbalis0308
8 жыл бұрын
Are you still selling the springs? I would like to buy 4 of them.
@hielke-gaming7997
5 жыл бұрын
Nice video
@gregecs
8 жыл бұрын
How to purchase the springs for nerf drums 25 darts plz ?
@OliberLuu
3 жыл бұрын
This also works for the 25 round drum
@ZergyGaming-nw7bj
3 жыл бұрын
Yo can you make a mod for the rhino fire drum mags they suck like hell
@johngrasso6224
7 жыл бұрын
Are you still selling the springs? I have a drum that needs fixing.
@brokcen2748
4 жыл бұрын
@Aiden Erickson and 2020
@joaogabriel1770
6 жыл бұрын
Hello, I live in Brazil, and I was wondering if you could take it after the purchase would take long time to get the package
@kirto9310
7 жыл бұрын
Thx
@kayden1971
4 жыл бұрын
Does another type of drum mag shows how to replace a dream of that other one
@mkraba
8 жыл бұрын
I need a new spring for my 25 drum. Where can I order?
@superwakky2947
6 жыл бұрын
Michael K I think out of darts
@nerffireflycorporation218
5 жыл бұрын
Check description
@davidcabrera2396
8 жыл бұрын
@nerf stuff are you still selling the springs
@unknownscientist1530
7 жыл бұрын
Found one of these at a thrift store in rough condition, dismantled and cleaned it up. Will this work on the other side like opening it up? I'm having a problem with a stripped screw preventing me from removing the clear part.
@FoamBlast
7 жыл бұрын
It would be really hard to do from the front. There is a lip preventing you from sliding the clip part out the front. I would just drill out the stripped screw, or maybe try superglueing a bit to the screw.
@unknownscientist1530
7 жыл бұрын
Quite a shame that has to be done but thanks for the information.
@unknownscientist1530
7 жыл бұрын
Okay so I just pried the plate off and it worked but now I'm having problems with the spring, it coils around the black spool but towards the end it does not feed into the spool correctly. I'm guessing I stretched it to the point where it is too large.
@joaogabriel1770
6 жыл бұрын
if I buy about how long would it take to get to Brazil?
@FoamBlast
6 жыл бұрын
We ship via USPS First Class International or USPS Priority International (customer chooses). First class is typically 7-21 days, with Priority being 4-10 days. This varies from country to country and doesn't factor in customs delays in the receiving country.
@nsdfnsdf
9 жыл бұрын
Thos springs your selling, how manny can you send to australia on the $8 postage cost? I have alot of 35s that need upgradeing.
@Dgohzilla
8 жыл бұрын
How do we order the spring from you?
@shenko_
9 жыл бұрын
May I please know more on how to purchase them? I would love an upgrade for my drums and don't mind paying extra if you do put it up for sale on eBay, I'm in Malaysia by the way and shipping may be expensive.....
@emilyrobbins7719
8 жыл бұрын
I also need a spring for the 25 drum... can i order one please?
@rickheard8506
7 жыл бұрын
Hello, are you still selling springs for the 35 drum?
Do you ship the springs through your site to the UK? Please do get back to me, I have one drum that don't work! help.
@FoamBlast
5 жыл бұрын
Yes! We ship to most countries, including the UK.
@RhienneC
5 жыл бұрын
Nice! Thanks!
@troythetinkerer
3 жыл бұрын
Are your replacement drum springs compatible for all Nerf Drums?
@altidudes
3 жыл бұрын
Does it work in the 30 round drum 🤞?
@lingfong
3 жыл бұрын
Most likely does, if it fits the 35 round drum then I should most likely fit. If it doesn’t then you could cut a bit but I doubt it.
@sgamessjlego
9 жыл бұрын
does this stop the misfires?
@sampersonguy5337
3 жыл бұрын
I have to work with these springs all the time at work (convenience store drink pushers use these) they SUCK
@georgealabdalla465
5 жыл бұрын
hello where do i get that type of spring
@masterborianstapabol1933
6 жыл бұрын
Where can I buy new spring
@FoamBlast
6 жыл бұрын
Link is in the description.
@robarmstrong5471
7 жыл бұрын
Wasn't there to see it come apart! So when done... 1. Spring hooked on drum via small slot 2. Spring wound through roller on clip? 3. Spring attached to bullet pressure plate to keep them down/ up (the feed)?
@sasazemcak1047
4 жыл бұрын
Love you Addy
@steveharper8256
7 жыл бұрын
I need to buy some springs. 6 actually. Do you still sell them?
@joaogabriel1770
4 жыл бұрын
Which company provides you these springs?
@Air_Wubbox_Anti_UTTP
Жыл бұрын
Mine is broken
@PhilipJayOcampo
7 жыл бұрын
Do these springs work for 25-mags?
@prrfctlyflawed
7 жыл бұрын
how can I buy a spring?
@albertbulanov538
7 жыл бұрын
Hello! I would like to buy a spring. How can i do that?
@bjornwallin7554
7 жыл бұрын
Same here.. where to get springs?
@BiggestSancho
7 жыл бұрын
Albert Bulanov got one spring in mint condition in chicago.
Пікірлер: 95