Best thing about a Sunday morning.. I was wondering about a drawer too.
@timmyhasheart
Ай бұрын
Yeah dude the more I thought about it the more I realise I don’t really want tools and recovery gear in the canopy if possibly 👍👍
@mikemorgan4670
Ай бұрын
🤔 Mmmmmm. I really appreciate how particular you are about things, Tim. Nothing worthwhile ever comes easy. Great content.
@timmyhasheart
Ай бұрын
Thanks so much Mike!! It’s been kicking my ass but we’re getting there slowly haha
@VaughanMunro-js4nr
Ай бұрын
Another Great progress update Video. It's good to see you sold the first tray ,it will help with the budget. Love watching the fabrication episodes. Explaining how and why you do it.
@timmyhasheart
Ай бұрын
Yeah dude that was super handy, pretty much just covered materials and lights I didn’t ask for too much, I would have done if I’d completed it. Cheers for watching!
@Tb48life
Ай бұрын
Top stuff Timmy 💪 you’ve got the knack for simple explanation.
@timmyhasheart
Ай бұрын
Thanks so much dude! Appreciate it 🙏🏻🙏🏻
@scottmcdonald2093
Ай бұрын
Love the way you explain it to detail, keep up the great work, cheers
@timmyhasheart
Ай бұрын
Thanks mate appreciate it 🔥🔥
@Nicksbluegu
Ай бұрын
Looks awesome dude, bit sad to see the triple rear lights go they looked dope, can’t wait to see the draw and canopy come into place👌🏽
@timmyhasheart
Ай бұрын
Yeah you’re not the only one man I fkn loved the triple lights if we could just not talk about it that would be mint 😂😂 But na it was a worthy compromise at the end of the day they’re just lights, the drawer will get dirty tools and gear out of my canopy! Very keen to see them go in too dude!! Can’t wait till they turn up
@kiho1995
Ай бұрын
Definitely a good looking tray. Even though you've started again, it'll be worth it when it just works and looks how you want it to look. Since starting to use deutsch plugs about 4 years back I haven't looked back, easy to assemble and 13 amps on each pin and as you said waterproof. I've considered using an 8 pin for a trailer plug as I have to tape it on if I'm doing a lot of rough dirt road driving and losing the plug with 2 tons behind is not a nice feeling.
@ellietthillery8204
Ай бұрын
100% a good idea for trailer/campers/vans. Also people can't borrow them 🤣
@kiho1995
Ай бұрын
@ellietthillery8204 I'd have an adapter so someone could but I just wouldnt tell anyone unless needed, but both my trailers can take a pretty good load and beating so I'm not too concerned where they go.
@timmyhasheart
Ай бұрын
Yeah dude they’re brilliant, I used an 8 pin one for my stereo speakers, I also used an 8 pin when I replaced my gearbox loom, 6 pin one when I chopped the car and stripped out all the old wagon wires and sent the new loom to the back of the car! They’re good for anything really, on the trailer is a great idea. Added bonus that no one can borrow it haha, those trailer sockets are useless
@MntlMajorkozmo
Ай бұрын
Not ruined. Just started the first step of polishing the new lights too early. Which starts with scuffing it with a sander. Just like renewing headlights. That wiring lesson is going into my library =)
@timmyhasheart
Ай бұрын
Hahaha I like it, definitely a positive way to look at it, I was gutted 😅 Nice! There is another dedicated wiring video on my channel that has a lot of little goodies in it 👍👍
@MntlMajorkozmo
Ай бұрын
@@timmyhasheart yeah im pretty sure that one is in the library too mate.
@Smiffbuilt
Ай бұрын
Tray 2 is awesome man. You would of learnt a heap on number one which bettered number 2 also. Well done
@timmyhasheart
Ай бұрын
Yeah dude always learning!!
@DanielKistler
Ай бұрын
Tassie Timmy’s tray builds. Came up awesome, can’t wait to see the end result!
@timmyhasheart
Ай бұрын
Cheers boss man, Trays R Us 🥵 I can’t wait either dude well over it hahah keen to see yours too!!! 🤝
@dean6267
Ай бұрын
Love the rear lights, uncle pooly has the right idea. Love ya work great episode 👍🤟
@timmyhasheart
Ай бұрын
Thanks heaps mate, he often does!! 🤝🤝
@Chris_Mack1987
26 күн бұрын
Love it brother keep them coming 💯
@timmyhasheart
26 күн бұрын
Thanks so much mate!! Will do 👍🏻👍🏻
@James_James01
Ай бұрын
Great fab work as always Timmy 💪, and auto elec skills are top notch pal keep up the great work! Personally, the lights on your GQ tray are just 🔥 👌
@timmyhasheart
Ай бұрын
Thanks heaps mate!!! Yeah they do look good they’re just eBay jobs haha 🔥🔥
@Gu_Gus
Ай бұрын
Appreciated the wiring lesson thanks Timmy.
@timmyhasheart
Ай бұрын
No problem at all mate I didn’t really show as much as I thought I did you can’t really see what’s going on haha, but hopefully it helps someone 🙏🏻🙏🏻
@awesomeatreyu987
Ай бұрын
Hey mate the balance is perfect now 😁Tray looks awesome too!
@timmyhasheart
Ай бұрын
I made sure whenever the audio was at 0db that the talking was also at 0db haha. It’s also easier with my real camera back because it amplifies the audio a lot more than the phone does. I’ll keep on it!! One thing I never do is actually “master” the audio like I do the video so I’ll look into it to get it all normalised across the board better. Thanks for the criticism mate appreciate it 🙏🏻🙏🏻
@awesomeatreyu987
Ай бұрын
@@timmyhasheart No worries man, I've been watching for a while and you've definitely upped the quality. A few mates and I are starting on YT doing 4x4 stuff as well @thesootybrothers4wd so we see your stuff as the gold standard
@timmyhasheart
Ай бұрын
@awesomeatreyu987 haha that’s awesome mate I’ll have to give it a suss
@JRCadventures
Ай бұрын
Your videos are getting so epic! Keep up the great work mate. Loving it
@timmyhasheart
Ай бұрын
Cheers mate!! Always trying to do a bit more each video, whether it’s audio, visuals, presenting better etc. constantly trying to improve so I appreciate that, feedback is always welcome 🙏🏻
@rollyb5061
18 күн бұрын
awesome Timmy, your fab skills amaze me, top job
@timmyhasheart
17 күн бұрын
Cheers bud! Keen to finish it 👊🏻👊🏻
@cyclemoto8744
Ай бұрын
Looking good Timmy In my opinon 2 lights are better than 3. To me 3 lights are for trucks and in Australia we all know that a ute is not a truck ;) Thanks for sharing
@timmyhasheart
Ай бұрын
Hahaha fair call, I do think the 3 looked better but also I really would love a drawer so it’s a good compromise, they’re just lights at the end of the day thanks heaps mate 🔥🔥🔥
@andrewrogan9194
Ай бұрын
Hey mate a little tip they may help with the cap temples for the end of rhs etc. cover the end in painter tape and cut it with a Stanley knife.
@timmyhasheart
Ай бұрын
Oh you mean to get the shape perfect? That’s a really good idea, particularly for an odd shape, you obviously want to make it 1-2mm smaller so that you’re welding from the backside out cause you’re sanding your weld away (ask me how I know) haha but that’s a mint tip thanks mate, these ones were a bit easier cause it’s just a piece of 75x50 with 2.5mm wall, minus a couple of mm for weld peno and you’re at say 68x43 🙏🏻🙏🏻 But that’s a wicked idea for odd shapes I hadn’t thought of it
@leonwayne7657
Ай бұрын
Nice work. Think about bedding the alloy sheet to the frame before you bolt it down with a paintable polyurethane instead of silicone. Works well to infill any anoying air gaps too!
@timmyhasheart
Ай бұрын
To be honest dude I don’t actually use any kind of sealant I just lay down rows of closed cell foam and then bolt it down to rivnuts and take heaps of care to get the shape perfect 👍🏻👍🏻
@scotthunter1639
Ай бұрын
Looks mint Timmy,well done mate 👌
@timmyhasheart
Ай бұрын
Thanks heaps dude 🔥🔥🔥
@aussiewalkabout4x4
Ай бұрын
I agree that the three lights looked better but making the centre wider made the two lights look in proportion so all good!
@timmyhasheart
Ай бұрын
Yeah dude I absolutely agree 3 looked better, but 2 is bearable with the room smaller 👍🏻👍🏻 and having a drawer will be good
@scott_edwards23
Ай бұрын
great episode, lights look smick 👌love your work.
@timmyhasheart
Ай бұрын
Cheers dude thanks for watching 🙏🏻🙏🏻
@SHOCKcustoms
Ай бұрын
Sweet build mate. Awesome vid
@timmyhasheart
Ай бұрын
Thanks heaps mate, cheers for watching 🤝🤝
@quincyoconnor9707
Ай бұрын
8:55 😂 definitely looked odd hahaha
@timmyhasheart
Ай бұрын
Absolutely gross hahaha, sometimes you gotta try a few things till it clicks 🔥 fortunately most people get to do that in private without tens of thousands of people seeing it. 😂
@wilderstreeeet
Ай бұрын
first time viewer here and i love your knowledge and content. The light wire up is killer and super handy thanks mate@
@timmyhasheart
Ай бұрын
That’s awesome mate glad to hear thank you 🙏🏻 tell a mate if you have a mate that also likes wheeling 🔥🔥
@NotAYoutuberAtAll
Ай бұрын
Wooooo! been waiting to see what ya had in store for us timmy, can't wait, keep up the great work you rippa! 🫡
@timmyhasheart
Ай бұрын
Haha didn’t get too much done mate, started all over again 😂😂
@NotAYoutuberAtAll
Ай бұрын
@@timmyhasheart Aint nothing wrong with that, it's better to do it right once than half ass it
@ellietthillery8204
Ай бұрын
Looking killa mate, sometimes we gotta do thing's twice or three times to get them right✌️. the old digital CAD is proper handy but nothing compares the old age Carboard Aided Design. Things always look different in perception, big thing I learnt doing fab was take it out side when tacked together and have good look around from distance/angles 👌
@timmyhasheart
Ай бұрын
Yeah dude you’re absolutely on point I do the same thing, gotta do a few laps once it’s tacked up which is actually what I did when I realised I didn’t like the first one haha, I wish I could have jumped in the computer and done a few laps around the model 😅😅 would have saved me some time and materials!
@ellietthillery8204
Ай бұрын
@timmyhasheart all apart of the experience eh!
@leonkane8240
Ай бұрын
Hey Timmy Thinking about that expensive light you scuffed with the sander, I was wondering if it is not too deep, you might be able to wet sand it back & maybe get that plastic polish to bring it back or close to what it should be. Or as an experiment, thinking you might not get it back to its original polished state, see what kind of a frosted like effect you might get with fine wet sanding & polishing it? Just an idea Probably better things to do with ones time I guess. Tray is looking awesome!
@timmyhasheart
Ай бұрын
Yeah I’ll chuck it in the drawer as a spare and if I get a moment at some point I’ll see how I go, you might even be able to replace the lens cause they’re just plastic glued but yeah appreciate it mate 👍🏻
@leonkane8240
Ай бұрын
The ones I have bought are I guess middle market & looking @ them I am thinking it might be hit or miss trying to remove the lens, might do more damage. If you can see a seal or gasket behind the transparency of the lens or anchor tabs then they might have replacement lenses for them. Mine it looks are seal with like super glue & I don't know that even putting gentle heat along the join would help & the join has no gap to get a blade or plastic spade in to pry it. @ $300 a unit, it would kind of be nice if you could replace them. I feel you pain I have been there too.
@timmyhasheart
Ай бұрын
@leonkane8240 yeah the singles are only $50 but all 6 were $300 obviously haha, then I replaced the 2 reverse ones so $400. But I also dropped and broke the lens on a reverse one so i know it doesn’t take much to get the cap off, I was thinking i could take the lens off a reverse one and glue it to the scuffed one but yeah anyway, they’ll all break when I’m flogging it in the bush hahaha
@adamw225
Ай бұрын
Oh man I’ve been there before thinking why didn’t I just spend 5 minutes and take the lights out and then everytime I look at the mistake I’m filthy with myself but there’s every chance you’ll back into something at some stage anyway 😂
@timmyhasheart
Ай бұрын
A hundred percent exactly how it felt dude I was so salty at myself haha.. but yeah I did replace it, but you’re right I’ll damage em anyway haha
@SeanSteggs
Ай бұрын
Tim, once again an amazing Vlog. Funny thing is today I followed home a Cruiser with a custom tray and they were running 3 lights either side. I couldn’t stop admiring them. Is the space available for the 2 to turn into a 3, even if tight ? No weight of splash back on them so clearance distances can be minimum. I love how you think it’s all sweet in CAD but the eye doesn’t approve. Your builds are not only amazing the eye for detail and looking right is right up there. Simple things like an angled rear pull out tray. Just wow. Thanks again for sharing. P.s. Rivnuts are awesome.
@timmyhasheart
Ай бұрын
Thanks so much mate always appreciate your insight and feedback, and na i don’t think I’d have fit them even if I crammed them together, the space is about 400mm and each light is 125mm so that’s 375mm but due to that bend the last 50mm or so is useless one end and due to the angle at the outer end the last 50mm is also useless there unfortunately, I did try haha cause I loved the 3 but that’s just the compromise we have to make sometimes 🙏🏻🙏🏻
@jessetink3753
Ай бұрын
Loving this tray build Timmy I love riv nuts to mate Can you please go into full explain how you are going to put your trundle draw in. You’re definitely right about the 3 lights look better than 2. But they still look good tho 👍🏽
@timmyhasheart
Ай бұрын
Yeah the 3 definitely looks unreal I’m just hoping I can love the 2 as much or I’ll be making a 3rd 😂😂 Yeah dude I’ll go into detail about the drawer for sure 🙏🏻🙏🏻
@jessetink3753
Ай бұрын
@@timmyhasheart thanks mate 👍🏽
@macpreston
Ай бұрын
Ohhh shit yeh timmy keep grinding boio!!
@timmyhasheart
Ай бұрын
Always my guy hope you’re well 🙏🏻🙏🏻
@After_Dark_Garage
Ай бұрын
Be tricky and use a van sliding door power contacts for number plate lights and reverse lights on the drawer 🤌
@timmyhasheart
Ай бұрын
Dude no word of a lie I was working on a way to get power into that drawer, I hadn’t considered that idea though I was more so thinking one of those fridge slide wire tracks
@After_Dark_Garage
Ай бұрын
@@timmyhasheart as long as nothing can get tangled in it! With those van contacts atleast it’s all just mounted on the inside of the drawer, could even be clever and run some steel pipe to run the cable through so it’ll never get damaged.
@timmyhasheart
Ай бұрын
@After_Dark_Garage yeah definitely I’ll have a bit of a look and a suss once it’s in, cause the space is so big I’d definitely still like to have those surface mount work lamps either side of the number plate to fill the room so it doesn’t look silly. The number place light isn’t a huge concern cause worst cause that can be notched into the RHS above it
@seaforb13
Ай бұрын
On your other rig you said you needed to raise your fuel tank to protect it and you would also consider doing the same for this rig. What did you decide. Even though we didn't see the overhang that made you change the design and start again, I'm a fan of the skinnier the better when it comes to trays, so I think it looks grouse. Good work young fella.
@timmyhasheart
Ай бұрын
Cheers mate!! So that other tank is a long range one so it hangs ridiculously low but because the GU has 2 tanks I won’t bother cause it already carries like 1000km range 👍🏻 As for the tray width I don’t mind so much about the width of trays as long as the tube sticks out a bit to protect the RHS and as long as you have a wee bit of tyre poke! Thanks for the kind words mate appreciate it 👍🏻👍🏻
@jonosbeanflickn
Ай бұрын
yet again Timmy another awesome video
@timmyhasheart
Ай бұрын
Cheers dude 🙏🏻🙏🏻
@Rb0395
Ай бұрын
Appreciate the vid as always, where do you get your deutsch connectors? I remember they were expensive for genuine ones
@timmyhasheart
Ай бұрын
Oh it kinda depends where I am, I get genuine if I go to Napa cause that’s what they have and they look after me, these ones were through Baxters who have their own brand of them. If I’m in autobarn I’ll get the voltage ones, if I know I need them proactively I’ll do a big order on eBay like just depends on the scenario and who has stock.
@jamesanglin7247
Ай бұрын
How’s the weight compare to if you had have built the tray out of alloy? Or is all the weight in the sheets for the tray?
@timmyhasheart
Ай бұрын
I don’t actually know hey, the thing is I won’t compromise on not having tube, those ally guards are flimsy things, I love tube guards and tube tailboards and I just haven’t come up with a good way to have steel tube guards attached to an ally tray but maybe one day. But yeah I also won’t have a big steel bed in it I’ll have an ally bed 👍🏻👍🏻
@rogertargett4769
Ай бұрын
Do the rivet nuts rust at all or are they coated...I've only used them on a battery relocate.
@timmyhasheart
Ай бұрын
Yeah dude that’s an awesome question so yeah they can rust, there’s 3 kinds there is aluminium, which I wouldn’t use for anything too structural, then there’s zinc or stainless. Stainless might have a tendency to reject the steel it’s put into anyway and rust and so I use the zinc ones. They don’t really rust in normal places but like in my wheel arches they can rust after a while. But they’re also not very difficult to replace 👍🏻👍🏻
@asa572
Ай бұрын
Love ya work
@timmyhasheart
Ай бұрын
Cheers 🙏🏻🙏🏻🙏🏻
@chopparead454
25 күн бұрын
Timmy you got by any chance the measurements of the tray and is it 32nb tubing? Looking to build a tray same mate but I reckon I’ll go with the 3 tail lights instead of three 2
@timmyhasheart
25 күн бұрын
I reckon just have a play until it looks good dude, not gonna give out my exact measurements haha.
@chopparead454
24 күн бұрын
@@timmyhasheart all good thanks anyways man, I’ll just wing it out but it’s definitely going to be inspired by your tray and I will be rewatching this video many times during the process to get it close haha
@SuperSpeziell
Ай бұрын
g'day timmy you are e pro in steel construction / Dan from switzerland
@timmyhasheart
Ай бұрын
I dunno about pro mate but I’m slowly getting my experience up!! A lot of great lessons from people smarter than me haha
@shanenorwell8580
Ай бұрын
Awesome work as always mate, Giving me some ideas for my gu dual cab. Are they 37s on it?
@timmyhasheart
Ай бұрын
Na dude not on this one they’re just 5’s, I’m actually working on getting the engineering for 3” and 35’s in tas so I probably wouldn’t go bigger for this car, the GQ is gonna be doing the 37 stuff haha
@shanenorwell8580
Ай бұрын
@@timmyhasheart yeh nice mate, Looks really in proportion. I’m going to be steeling some of your tray design I think. Love it👍🏻👍🏻
@johnmorris3735
Ай бұрын
Love watching the fab parts, really interesting. Just curious, what is your daily job?
@timmyhasheart
Ай бұрын
I actually work in IT/Computers/Phones etc. haha nothing to do with fabrication or mechanical, which is I guess why I have such a passion for it maybe? I dunno I like them being separate. 🫡
@adventures_with_simo
Ай бұрын
Your welcome RE the eating 😂 Tray is coming along great.
@timmyhasheart
Ай бұрын
Haha wondered if anyone would notice considering it’s the very end screen, thank you for watching right through haha 🔥🔥
@adventures_with_simo
Ай бұрын
@@timmyhasheart all good mate. I enjoyed the build. I’m tempted to tackle building one myself after watching the vid. You did such a good job.
@timmyhasheart
Ай бұрын
@@adventures_with_simodo it dude it’s heaps of fun, well the first one was a heap of fun, it’s been crap catching back up on the second one but were there now haha
@adventures_with_simo
Ай бұрын
@@timmyhasheart On the bright side, you have a nice little side business tray building LOL
@TonyMcintyre-wk8gg
Ай бұрын
Hey mate I can’t see how bad you sanded the light but you could try using fine sandpaper then wet sanding with 400 then 800 then 2000 and buffing it up give it a go you got nothing to lose
@timmyhasheart
Ай бұрын
Yeah it did cross my mind haha, but tbh they’re only about $50, it’s just when you buy 6 that they’re $300 haha
@PauleyBuilt
Ай бұрын
Have a pipe bender but looking at buying a tube bender like your using. What dies are you using for 32NB cause I see the dies here in NZ are based on Tube O.D but Id like to use pipe. Are you using a tube die thats close enough or do speedwerx in Aussie do pipe dies? Thank you.
@timmyhasheart
Ай бұрын
Yeah on the speed werx site you get whatever die correlates with what you’re using whether it’s, Pipe, NB tube, CDS, DOM, so I just have the 32nb die for 32nb which is 42.4 OD and then for 40nb I use my 40nb die which is 48.3 OD. All available on the site and they list in MM too. You can’t just use what’s “close” that’s when it kinks, you need the sides to be supported which means a perfect interference fit.
@PauleyBuilt
Ай бұрын
@@timmyhasheart sweet thank you. Must have to special order em here in NZ for pipe ones bugger it. They have all the tube dies in stock but nothing to suit NB o.ds. Thanks for your time.
@timmyhasheart
Ай бұрын
@PauleyBuilt so NB is technically tube, because while it’s “bore” it’s nominal bore which means by name only, but as the wall thickness changes it’s the bore that changes, the OD never changes so technically tube. and what it sounds like is you have a pipe bender, or pipe kinker, which is what I used to have and I had to special order NB dies. Google “dawn dies 32nb” that’s what I used to use and it was a perfect fit, never kinked.
@PeterHatch-mx7zc
Ай бұрын
Good looking bed whats the size of square tube thks
@timmyhasheart
Ай бұрын
Thanks mate, outside beams are 75x50 and cross sections are 50x50 👍🏻👍🏻
@PeterHatch-mx7zc
Ай бұрын
@timmyhasheart ill convert to inches America lol
@maxcatty2463
Ай бұрын
what thickness zinc sheet are you using
@timmyhasheart
Ай бұрын
2mm dude!! 👍🏻
@jamestanner9198
29 күн бұрын
Tim I just watched your fuel pump video again. I have a 2001 td42t factory no intercooler. bigger exhaust fitted that's it. It goes much better spools up better. what can I safely do with the pump to get it to go off mark and top end myself. It has a factory 11 mm pump.
@timmyhasheart
29 күн бұрын
First thing you need to do is intercool it, they’ll never get up and move with hot air, I’d never ever touch a pump until it has an intercooler 👍🏻👍🏻
@jamestanner9198
29 күн бұрын
@@timmyhasheart thanks mate. where would you suggest to get one from that won't cost arm and a leg. And my first born
@timmyhasheart
29 күн бұрын
@jamestanner9198 both my intercoolers were under $500 dude you can either go front or top mount and either go a kit or DIY, if you get a kit it’ll be up in the thousands cause they’ve done the work to make the pipes fit but could just get an eBay universal kit and make the brackets and that yourself
@timmyhasheart
29 күн бұрын
@jamestanner9198 but either way to see any kind of gain out of a TD more than factory it needs an intercooler
@jamestanner9198
29 күн бұрын
@@timmyhasheart Sounds the way to go. my WIA Mig does tig as well. not done any but time to learn im thinking.
@chublez
Ай бұрын
Brother just sand the light back to a polish. It'll be fine.
@timmyhasheart
Ай бұрын
At the end of the day the lenses are replaceable and the lights are $50 each I was kinda just being a sook haha, wouldn’t bother sanding one back tbh I hate sanding 😂
@charliedodt8443
Ай бұрын
Awesome video mate, whats the song playing during the opening credits?
@timmyhasheart
Ай бұрын
I’m not actually sure dude they’re just royalty free songs from “Epidemic Sounds” and “Artlist” specifically for use on KZitem without getting copyright claims
@charliedodt8443
Ай бұрын
@@timmyhasheart haha all good thanks for letting me know though!
@endotasweegin6613
Ай бұрын
What is the template material you use mate? I've used all sorts of shit over the years and hard to find the right thing
@timmyhasheart
Ай бұрын
Template material? Like the cardboard? I just get good cardboard sheets from office works.
@endotasweegin6613
Ай бұрын
@@timmyhasheart office works! Beauty mate cheers
@cruisering
Ай бұрын
Great workmanship, what settings were ya using on the mig? Argon mix?
@timmyhasheart
Ай бұрын
Thanks heaps mate, still learning every day with it, it blows my mind just how much there is to it even after you can do a pretty bead it’s crazy. Like dealing with distortion and warping etc. Off the top of my head like 6m/min and 19v or something very close to that, I did used to have it absolutely cooking but on this tray I wound it back a bit, lowered the wire feed and controlled the heat a bit with speed. And yeah 2/5 argon mix Cheers 🔥🔥
@cruisering
Ай бұрын
@timmyhasheart thanks for that mate. Yeah, I'm an experienced tradie, but when I weld I feel like a first year apprentice lol.
@timmyhasheart
Ай бұрын
@cruisering I don’t think I’m an amazing welder, I can lay pretty beads but the more I make stuff the more I learn that’s just the beginning 😅
@stephenlatimer1428
Ай бұрын
mate is the wiring tinned copper or just copper u use on ur builds. just had all the wiring replaced on the F250(not the Ford harness)with tinned for all the reasons tinned gives u.
@timmyhasheart
Ай бұрын
But of a mix and match mate to be honest I’m pretty handy at knowing what’s going on with these old girls by now and so if and when I have gremlins it’s not long until they’re sorted haha
@stephenlatimer1428
Ай бұрын
@@timmyhasheart only asking n wondering mate.
@timmyhasheart
Ай бұрын
@@stephenlatimer1428na na for sure 👍🏻 but yeah I had a gremlins with the headlight wiring once where the wire chafed through and it was most likely to being old 90’s wire like it isn’t the greatest, and the wires in the door gutters for the door sensors always corroded etc but I’ve mostly just repaired it as I go 👍🏻👍🏻 you get good at finding the issues in these old girls haha
@tazyt3388
Ай бұрын
trial and error bro thats the development process you’re guna end up with a ripa though 🍺👍
@timmyhasheart
Ай бұрын
That’s it mate haha, hopefully this ones the last 😅😅
@rossstafford4531
Ай бұрын
Doesn’t look too bad, mate, but I would go with something like what you’ve got there but it’s more flusher into the body that might make it look a lot better but you’ve done a good job on the on the rear end of it 👍🏻🇦🇺🍺
@timmyhasheart
Ай бұрын
Cheers dude appreciate it 🙏🏻🙏🏻
@rossstafford4531
Ай бұрын
No worries mate. Just a little tip. If you’re running your snorkel and you’re running a light bar up on the roof run your wiring with conjure inside your snorkel and it’ll hide your wiring and show that you’ve done a neat job. That is what I have done to my GU Nissan patrol wagon, good luck with yours, mate. I’ll be good to see what more you have done to it. 👍🏻🇦🇺🍺🍺
@rossstafford4531
Ай бұрын
And also when you are putting the wiring through your snorkel when you drill holes in it put rubber grommets so it’s seals the wiring properly 👍🏻🇦🇺
@timmyhasheart
Ай бұрын
Oh yeah that’s a nifty idea for sure, I run a bare roof on my cars so the only place I’ll have wiring up there is for the solar panel on the canopy but I’ll keep it in mind for sure!! Cheers dude 🙏🏻🙏🏻
@rossstafford4531
Ай бұрын
No worries mate. If I can think of anything else, I’ll pass it your way. Good luck with the rig mate. It’ll be good to see more videos on what you are doing. 👍🏻🇦🇺
@derJackistweg
Ай бұрын
Is that street legal in AUS: when the do not point STRAIGHT backwards?
@timmyhasheart
Ай бұрын
It sure is dude!! 🔥🔥 my GQ is fully engineered and passed several roadies with the same back. Lights must be visible at 40° 👍🏻
@dilligafmofo5921
Ай бұрын
Get the Oz Tent RS-1 stretcher. It's by far the best stretcher for a single swag. It is heavy but it's built like a brick shithouse.
@timmyhasheart
Ай бұрын
I think this may have been meant for Aussie Arvos video hahah
@@dilligafmofo5921hahahaha cheers mate, I’ll pass it on to jonesy about the stretcher ;)
@alexcapuano4851
Ай бұрын
Tidy wiring!
@timmyhasheart
Ай бұрын
🙏🏻🙏🏻🙏🏻
@experienceoutdoors6279
Ай бұрын
Man get a metal cutting circular saw thank me later it's a proper game changer wayyy quicker and no dust, loud tho
@timmyhasheart
Ай бұрын
Like a cold saw? Yeah it’s on the list dude, unfortunately funds aren’t unlimited but it’ll happen I’ll sort a bandsaw or a cold saw
@experienceoutdoors6279
Ай бұрын
@@timmyhasheart nah circular saw like for timber but their only 5 or 6" for sheet metal it absolutely chews though 5mm sheet. Surly Kincrome have one 😂
@timmyhasheart
Ай бұрын
@@experienceoutdoors6279 ohhhh right na haha I want something that can do stainless 3” pipe right through to like RHS mitres, something with coolant and that I can leave like a bandsaw haha
@experienceoutdoors6279
Ай бұрын
@@timmyhasheart yeah a brobo saws the best honestly get a big boy when you do the 355mm, I requested one at work but the purchasing officer bought the 315(cheaper) but 6 sharpens in you won't cut 75mm square in one go. Its annoying coz they blades ain't cheap
@markleon7076
Ай бұрын
Tim what is your tray size in L×W just queries
@timmyhasheart
Ай бұрын
I think it’s pretty close to a bang on 1900 square mate! First one was 1950. That’s RHS to RHS not including tube guards 👍👍 but GU are super super wide, as are the diffs/wheel track 👍🏻
@markleon7076
Ай бұрын
You have not got much overhang on your tray I was more looking for the length of the tray?
@timmyhasheart
Ай бұрын
@@markleon7076oh yeah na like 1900-1950 I like them as short as possible 👍🏻
@markleon7076
Ай бұрын
Ok thanks tim
@Brennomac83
Ай бұрын
I much prefer the 2 rear lights over 3. The centre was to narrow and it had to much of an agricultural landcruiser look.
@timmyhasheart
Ай бұрын
Oh true? That’s good, I think I like the 3 more but a drawer is something I’m willing to compromise for, cheers 👍🏻👍🏻
@Brennomac83
Ай бұрын
@@timmyhasheart the 2 rear at the end, not the start 😆
@timmyhasheart
Ай бұрын
@@Brennomac83yeah haha the two at the start was gross, brutha ewwwww
@ash300186
Ай бұрын
Sequential indicators are a silly gimmick imo
@timmyhasheart
Ай бұрын
I couldn’t agree more, and I fkn love em 😂😂
@ash300186
Ай бұрын
@timmyhasheart haha yeah to each their own I guess😅 well done with the vids too mate, I really enjoy your content
@timmyhasheart
Ай бұрын
@@ash300186haha I wouldn’t have bought them but a mate literally had them sent to my house so I couldn’t not use them, then once I saw them I was like okay that’s pretty damn cool hahaha, I don’t usually care much for the fancy things. Cheers dude appreciate it 🙏🏻🙏🏻
@christopherjames6944
Ай бұрын
Why does the back of your patrol look like the front end of a 2015 pajero sport 😂
@timmyhasheart
Ай бұрын
Hahaha I was kinda thinking it had skyline vibes tbh 😎😎
@beardmoto
Ай бұрын
Thanks for EATING? 😂
@timmyhasheart
Ай бұрын
Yeah boi, appreciate it 🌯🌯
@BenWaters-uz3km
Ай бұрын
Wanna sell the original one you made?
@timmyhasheart
Ай бұрын
It’s already sold sorry dude 🙏🏻🙏🏻
@BenWaters-uz3km
Ай бұрын
@timmyhasheart all good, loving the videos, looking forward for two weeks time
@Bahnamoon
Ай бұрын
So CAD=Cardboard Aided Drafting?
@timmyhasheart
Ай бұрын
Something like that yeah haha 🤣
@RealDisrespecful
Ай бұрын
What do you do for work?
@timmyhasheart
Ай бұрын
I work in the sorta computer/phone/IT space haha, nothing to do with this at all!! Just a hobby 👍🏻👍🏻
Пікірлер: 186