Watch Next 😎👇 🥰 How To layer sublimation and HTV kzitem.info/news/bejne/lKyCsXqHkmtyh20 ✨ Clear Glitter HTV On Top Of Sublimation kzitem.info/news/bejne/2KGn24ODf3algXo 🤩 Make Your Own Pattern Glitter HTV with Sublimation kzitem.info/news/bejne/mG6V3IVqhqKrdJg
@lindalam1398
2 жыл бұрын
Before watching this video, I would just throw away the garment if I made a mistake because I didn’t know HTV could be removed. I tried method 2 today and it worked wonders! Thank you so much for this video!
@aurimasdulskis
Жыл бұрын
Do it depends if you try to remove vinyl from the fresh new garment or from the old one? I tested with some old garments and I cant find the way to remove residue glue. For me its impossible to make a garment look like fresh new.
@DesignBundles
Жыл бұрын
You are so welcome! We are glad we could help! Are you a member of the Facebook group? It's a very supportive group of crafters: facebook.com/groups/1930716583871665 Let us know if we can help! - Dawn 🙂
@lagatakim
Жыл бұрын
Thank you!! I do not have a heat press, I used my iron and it worked! There is a shadow on the fabric, but I plan on placing the same design again. You saved me!!
@annlroe
3 жыл бұрын
I have watched another video before seeing yours and it said to heat the mini press up the maximum temperature and then iron slowly over the top of the vinyl what you want to remove and the vinyl will start to curl. To my surprise it worked. If you cannot always get to the back then this works great. Thank you - your videos are always full of information :)
@aurimasdulskis
Жыл бұрын
Do it depends if you try to remove vinyl from the fresh new garment or from the old one? I tested with some old garments and I cant find the way to remove residue glue. For me its impossible to make a garment look like fresh new.
@LiKE-dg1bl
3 ай бұрын
amazing, I used the second tip/hack! This is revolutionary for me in my daily work life. Thank you so much. Never would have thought this would work. I'm saving so much merchandise now and it's also taking the fear out of my daily heat press work as I don't have to worry about making a small mistake again. Thanks so much.
@elizabethschultz3260
Жыл бұрын
Thank you so much! I just botched the entire back of a bridal tote bag and was freaking out! I used the mini press because I didn’t have the chemicals on hand and it worked great!
@DesignBundles
Жыл бұрын
Ahhh!! We're glad we could help and save the project! - Dawn
@michellemendoza4999
3 жыл бұрын
I literally needed these very answers for how I lifted off htv from my husband's shirt the 2nd way (mini iron) barely last night! It left a sticky, colored residue so I'll be reheating the inside of the shirt where the residue is and use the copy paper to lift off? Very interesting, I will definitely try that tonight, thank you so much. 💓
@kathyf8543
3 жыл бұрын
I am so glad that I watched this few days ago. It saved me a lot of times today. I usually tried to pick it off without any luck. This came right off. Thank you!!
@aurimasdulskis
Жыл бұрын
Do it depends if you try to remove vinyl from the fresh new garment or from the old one? I tested with some old garments and I cant find the way to remove residue glue. For me its impossible to make a garment look like fresh new.
@araceliramos3818
Жыл бұрын
Thank you! I was so frustrated about to just give up, but the heat press worked! Super easy and fast.
@kfuppak
Жыл бұрын
Thank you so much for this video i am making shirts for a birthday for a client and i was ao stressed and worried when i realized i missed a spot in the weeding process! Wow you saved me!!! Thank you!
@DesignBundles
Жыл бұрын
Oh we are so happy to help Korina! - Agata
@aishahenderson2737
Жыл бұрын
Did it leave a mark from the old letters I made a few she rts and one shirt is so cute but the words are not placed correctly
@LisaGal0725
Жыл бұрын
Thank you< thank you! Worked like a charm. I was able to heat from the back with my little Cricut press.
@katharinemaroney7355
Жыл бұрын
The reverse heat transfer worked perfectly. Thank you so much....so helpful!
@DesignBundles
Жыл бұрын
Hi Katharine! So happy to help! - Agata
@zullo3529
3 жыл бұрын
I had never heard the trick with copy paper. I’m going to try it. Thanks Becky
@kate_272
Жыл бұрын
I only have the 12x10 heat press so I used a flat iron and it worked great to get a small part of the design off. Will definitely be using this trick again. Thank you for the tutorial!
@DesignBundles
Жыл бұрын
You are very welcome, Kate! We're glad we could help! - Dawn
@juliebolduc802
3 жыл бұрын
Game changer for those of us who continually forget to weed something, somewhere! Thanks!
@maryflavell6550
2 жыл бұрын
well I didn't have either of those things so after a little experimentation what worked for me was wrapping the shirt around a curling iron (bracing the tip where it doesn't get hot against the table) and then rubbed at the vinyl with the side of a small flat silicone mold that I had. Worked like a charm!
@aurimasdulskis
Жыл бұрын
Do it depends if you try to remove vinyl from the fresh new garment or from the old one? I tested with some old garments and I cant find the way to remove residue glue. For me its impossible to make a garment look like fresh new.
@dinobdawg8456
Жыл бұрын
Thank you for this solution… it worked like a charm :)
@maryflavell6550
Жыл бұрын
@@aurimasdulskis I haven't tried it on old - but it's pretty likely it's consistently harder to get it off of older. However, it also depends on the fabric - some shirts it came off ok, and others it left a residue. shrug
@jarionallen1484
5 ай бұрын
Thxs but does this work for glitter vinyl also🤔
@maryflavell6550
4 ай бұрын
@@jarionallen1484 it's hit or miss. I think it depends on how old it is, what kind of fabric it is, and how strong the glue is. Some things I tried this on worked fine, others I could still see the glue residue (particularly on dark fabric) soooooo ::shrug:
@maryeaves4195
2 жыл бұрын
I found your video today when I was in desperate need. Thank You So Much. I can't use the chemicals so the might mini worked Perfectly!!! You saved me time and money. Yay!!!!!
@DesignBundles
2 жыл бұрын
Hey Mary! We are so glad you found us!
@ashleywright7567
Жыл бұрын
You saved my father's day projects! Thank you!! ❤😂
@SA-gf7uf
Жыл бұрын
Thank you the heating from behind worked and I fixed what I missed when I weeded. 😊
@tqfan10
2 жыл бұрын
I was trying with my mini press but couldn’t get it to work until I found this video, I was just using it the wrong way! Thank you.
@DesignBundles
2 жыл бұрын
Glad we could help!
@alyssafox4323
Жыл бұрын
Thank you so much for this! The solvent did the trick for me on 2 faux leather sling bags that I was hoping to salvage. Worked like a charm!
@mpcaz
2 жыл бұрын
You just saved me from having to toss out a shirt and recut the HTV decal the iron trick worked great! THANK YOU! THANK YOUTHANK YOU! THANK YOUTHANK YOU! THANK YOUTHANK YOU! THANK YOU
@DesignBundles
2 жыл бұрын
Glad it helped!
@AshleyElliott-o3w
Жыл бұрын
THANK YOU! You just helped me save a project and not have to run out and get a new shirt!
@TanyaWestendorf
Жыл бұрын
What a great video! Do you know if the chemical works the same way with foil lettering and whether or not it will leave residue on darker materials?
@williamjoycehall99
2 жыл бұрын
Will the Vinyl Liftoff work with cotton/polyester blend? Also, if the fabric is royal blue and the vinyl is white will it leave a residue? Should you then prewash before trying to reapply new vinyl?
@DesignBundles
2 жыл бұрын
Yes to all of the above with this I have no residue it does take some practice but definitely a good method for getting the job done
@grownwiseprince
Жыл бұрын
that actually worked wish i knew that long ago. Thanks 😎
@melanieweatherspoon510
3 жыл бұрын
Thanks the mini heat press worked out great!!!!
@edithrobillard3667
3 жыл бұрын
Don the 2nd way before but it didn’t come off that easy. Thanks for the help.
@anagallardo3870
3 жыл бұрын
Thank you! I was making some shirts for a little girl and I accidentally put the design on the wrong size shirt... I got the letters off with my easy press mini, so now I need to try the paper trick for the sticky stuff. I so hope this works so I don't have to buy another shirt since I have to get it done by sunday.. Thanks again!
@DesignBundles
3 жыл бұрын
Happy to help! 😊
@sheritaj1732
3 жыл бұрын
Life saver!!!! The advice about removing the adhesive was spot on!!1
@DesignBundles
3 жыл бұрын
Thank you for watching! 😊
@littlecraftnest
3 жыл бұрын
I’ve been using the VLR for years but I always wear gloves when using it as it is chemicals that you’re using. I haven’t tried using the mini press to heat from behind but that may be an option next time I make a mistake. Thanks for the suggestions.
@stacymiller3437
11 ай бұрын
Thank you for this video! This is exactly what I needed to save my shrit I burned vinyl on!
@lindakauranen4091
2 жыл бұрын
I just bought a beautiful Niki polyester rain jacket but do not want the team logo on it. It is good to know this works but worried the product will stain the black fabric. Do you think it will?
@kristineiwanyckyj9197
2 жыл бұрын
Yes it will. I just experienced this.
@beverlybuford9055
Жыл бұрын
Becky, what do suggest I use on a tumbler without ruining the paint if I don’t have any Lift Off?
@DesignBundles
Жыл бұрын
What type of material did you put onto the tumbler? - Brittany
@brandysdandycrafts
6 ай бұрын
Hello 👋 would you recommend Liftoff for a graduation cap if htv needed to be removed?
@Gray_Day_Flower_Farm
Жыл бұрын
Thank you for this video, you saved my butt. I had an order due tomorrow and two shirts had mistakes. But that back heat trick worked.
@DesignBundles
Жыл бұрын
We're so glad to hear that! ⭐ - George
@SandersandCo2123
2 жыл бұрын
Thank you!!!! So easy, especially with my new cricut easy press mini!!! Super helpful to correct the wrong year on an item.
@DesignBundles
2 жыл бұрын
Yes! Mistakes happen and now we have a few easy ways to fix them! 😊
@svccoaches7208
2 жыл бұрын
You are AMAZING!!! The “heat from back” worked like a charm !!! Thank you for saving the day !!!
@DesignBundles
2 жыл бұрын
So glad to hear it worked!
@frankiegriffin3515
3 жыл бұрын
Thanks for the info. I have a broken letter that I need to replace & will try heating from the back to remove it!
@DesignBundles
3 жыл бұрын
Glad this video could help! 😊
@leslieharold4606
Жыл бұрын
Life saver!!! I thought I was going to have to chuck all the shirts I screwed up! Thank you!!!!
@DesignBundles
Жыл бұрын
Thank you for your feedback, Leslie! We appreciate you watching ☃️⭐️🙂
@sarahhastings2950
Жыл бұрын
I used Iron Method to get some vinyl up and it worked!!!! however, still using paper and the iron to get residue up and it isnt working quite as easily i will be getting some of the release stuff for future!!
@deliawilson4939
9 ай бұрын
Oh thank you so much. Really appreciate this fix
@gracem5707
2 жыл бұрын
this literally saved me $200. you are a god.
@DesignBundles
2 жыл бұрын
Always happy to help!
@heatherbrekke9567
2 жыл бұрын
Heating it from being worked like a miracle! Thanks!
@DesignBundles
2 жыл бұрын
Hey Heather! We're so glad this helped!
@donnahyatt5479
3 жыл бұрын
YAY!! The mini press methoda saved my project for my granddaughter!!!
@DesignBundles
3 жыл бұрын
That is awesome!
@kathryndoyle4204
3 жыл бұрын
Thanks for the tips. I used my mini easy press method yesterday to remove a small mistake on a shirt. It did leave a bit of residue behind, but it was a darker shirt and not very noticeable, and the shirt was for me, so I can live with it. Now I will try to remove it with copy paper. I think I will look for the Vinyl Lifter to keep on hand.
@DesignBundles
3 жыл бұрын
Happy to help! 😊
@yvonnerouse295
2 жыл бұрын
Just tried using Lift Off and it was very easy to remove. Thanks for the tip about removing the adhesive residue.🤗
@DesignBundles
2 жыл бұрын
Hi Yvonne! We're glad it helped! 😊
@aurimasdulskis
Жыл бұрын
Do it depends if you try to remove vinyl from the fresh new garment or from the old one? I tested with some old garments and I cant find the way to remove residue glue. For me its impossible to make a garment look like fresh new.
@ashleythomas5378
2 жыл бұрын
I got the "Heat from the back" to work on my press. I threaded the top/heating element into the sweater, with the chest /graphic facing down and the heating element at it's back. Using a teflon pillow i was able to hold the garment against the heat and remove the vinyl in portions... Thank you for the tip.
@DesignBundles
2 жыл бұрын
We are glad it helped, Ashley! Thank you for watching!!!
@FrozenxMelody
Жыл бұрын
So, for my project, I made a mistake on bookcloth, so there is no way to apply to the back. It it possible to remove it if I apply from the front?
@rlssuper7mom
Жыл бұрын
How long after utilizing the VLR method should you wait before re-applying new vinyl with heat? The packaging on the VLR is very clear about how flammable it can be.
@DesignBundles
Жыл бұрын
I found information that you don't need to wash after using VLR? So maybe you can use it straight away? I really am not sure you might need to contact the manufacturer to double check
@Ben-ki3cv
4 ай бұрын
Can you apply vlr to leather that has a htv logo or will it damage the leather?
@gailsears2913
Жыл бұрын
Good to find out about the chemical!
@semperstitchingllc7801
2 жыл бұрын
Holy cow, I needed this. I didn’t know how I was going to get all the vinyl off this sweatshirt.
@DesignBundles
2 жыл бұрын
Glad we could help!
@AngieBrittHEC
3 жыл бұрын
Luckily this doesn't happen to me often, buuuutttt, I just had a mishap last week where I missed weeding the center of a letter. I have NO idea why I didn't think of holding the shirt on the mini press. I did use it and heated from behind but then immediately tried using my pin pin tool. It was catching the fibers of the shirt. Well, next time I'll hold it under there OR use the awesome VLR that I just purchased using your link. I know my local shop has the bigger one but didn't want to spend the $20+ on it so, I went with the smaller one! Thank you for the tips!
@valeriedietrich2466
3 жыл бұрын
I use the liquid remover however when applying it to the back IF my material allows me too, I will stretch the material and it practically comes right off for me! Nothing left to pick off!
@jkandalanahill
3 жыл бұрын
You're the best!!! It worked and I'm so happy!!!
@DesignBundles
Жыл бұрын
Glad we could help! - Brittany
@dagwoodbl
3 жыл бұрын
Will this work on a polyester jacket? All these videos I see are on cotton shirts or towels
@kimobrien9848
Жыл бұрын
Thankyouverymuch for the tip of applying heat to the back side, this worked perfectly on my iron. I had to remove a small design on the front and there is a design on the back so Im not able to save the shirt. :)
@DesignBundles
Жыл бұрын
We're glad we could help save your project, Kim! - Dawn
@patriciachristopher1616
3 жыл бұрын
Thank you for this video! I bought a can of the lift off but was scared to use it. Now I know how to use it! Thanks again 😁
@DesignBundles
3 жыл бұрын
We're always happy to help! Thanks for watching! 😊
@brittanydeleon8418
2 жыл бұрын
Will white htv leave a dye behind on a maroon colored jersey like in your video?
@DesignBundles
Жыл бұрын
It should not - the red does tend to leave a dye if it is pressed around to heated too much. - Brittany
@LorraineCastellon-Rowe
3 жыл бұрын
WOW!!! That was amazing!!! Saving this for future reference!! Thank you very much!! 💖💜💛💖💜💛💖💜💛💖
@sukamayoutube2323
Жыл бұрын
I've accidentally melted the vinyl on the glass I was applying it to, I am so stressed about it. Ruined my whole set of gifts. Going to try reheating it ❤
@markroadkillrecovery1168
Жыл бұрын
What if you weren't able to heat the backside of the item, can you heat the vinyl directly?
@markroadkillrecovery1168
Жыл бұрын
Also it's not cotton but reflective vinyl on a rain coat
@lisaschafer466
3 жыл бұрын
That was so helpful thank you so very much from a beginner
@Theresa914
3 жыл бұрын
Great video, i needed this yesterday, lol. I made a vacation shirt that said Galveston instead of Orange Beach. Sent a repair kit to her but we didn’t know it would come off at all, especially so easy!! This is awesome.
@DesignBundles
3 жыл бұрын
Happy to help! 😊
@aurimasdulskis
Жыл бұрын
Do it depends if you try to remove vinyl from the fresh new garment or from the old one? I tested with some old garments and I cant find the way to remove residue glue. For me its impossible to make a garment look like fresh new.
@sheilabowman3256
3 жыл бұрын
Wow ! Great to have on hand !! Thx for sharing!
@nikolapearson256
Жыл бұрын
I used the iron method, but I think the adhesive started to burn. Will VLR still remove the adhesive?
@DesignBundles
Жыл бұрын
Hi Nikola! Is there a stain on the shirt from the adhesive? - Dawn
@nikolapearson256
Жыл бұрын
@@DesignBundles It's athletic warmup jacket is black, so it doesn't look like it's stained. The area with the adhesive is glossy.
@KaiRedfern
2 жыл бұрын
Does this work for all fabric material types? I want to use this on screen printing fabric to make it reusable but I’m a little nervous about ruining it!
@DesignBundles
Жыл бұрын
Hi there! These types of products are only to be used when removing HTV. If the design has been adhered to the shirt for a time, you will notice a residue so this really is meant to be a fix for small errors. - Dawn 🙂
@lyndasantirice2000
6 ай бұрын
You saved my project!!
@RaybandzXO
7 ай бұрын
Does this work on leather?
@ginalethlean-nunnelley3262
Жыл бұрын
THANK YOU THANK YOU you saved me from throwing 2 shirts away!!!!!!!
@RosaPerez-yp2kr
Жыл бұрын
Hello, you said butcher paper would work to remove reside, would parchment paper work?
@DesignBundles
Жыл бұрын
Hi Rosa! Yes I think parchment paper would work!
@arianagallagher3547
3 ай бұрын
Hey what store can I buy that stuff from please let me know cause I don't want any letters on my pink clothes and can you buy that stuff here in Canada London Ontario if so what store please let me know 💞💞
@biloparisien9903
10 ай бұрын
Does this work on pet film sticked with heat ?
@cindymckenzie9230
Жыл бұрын
Any suggestions for removing PRINTABLE HTV? I used Silhoutte Printable HVT for dark fabrics and created a 1 pc. square design on a 50/50 poly-cotton T shirt. The HTV did lift the vinyl however it cracked it in a million tiny pieces so using tweezers to lift it off was impossible. I used a scraper and although I was able to scrape 90% off the remaining residue and tiny pieces will not come off and have smudged into the fabric. I tried LOTS of VLR, inside, outside, heat inside & out nothing has removed the bits and residue. I tried both methods shown in your video, LOTS of VLR, inside, outside, heat inside & out nothing has removed the bits and residue. Any other suggestions?
@DesignBundles
Жыл бұрын
VLR works the best but I've heard with dark colors it does leave a white residue. What about heating the design from underneath and peeling it off? - Dawn
@r3b3l10us
Жыл бұрын
would this work on aprons? like the ones home depot has…if u can please look into it and let me know :)
@DesignBundles
Жыл бұрын
Hi there! Yes, you can remove the vinyl using these methods but double check that it isn't screen print ink you are trying to remove! - Dawn
@karenziegler2201
2 жыл бұрын
If using the VLR do you need to wash that area before reapplying the HTV?
@DesignBundles
Жыл бұрын
Hi Karen! Yes, we do suggest washing any garment after using VLR - Dawn 🙂
@finntortorella966
2 жыл бұрын
How do you do this to a pillow ?? When you can’t get the back of it because of the stuffing ?
@sandratimm8289
3 жыл бұрын
Will this work with double layered
@khowler
2 жыл бұрын
Do you have any tips on how to get out smeared sublimation ink from removing Siser Easy Subli?
@DesignBundles
2 жыл бұрын
Oh no! What type of shirt were you using? Just to clarify, the sublimation ink spread to the shirt during the application?
@khowler
2 жыл бұрын
@@DesignBundles 100% pollyester, sublimation ink spread when I was using VLR (Heat Transfer Vinyl Remover for Fabrics) to get the Easy Subli off due to a mistake I made during application. Oddly enough, front wouldn't come off AT all, back mostly came off, but some of the ink smeared and left an outline. I may just wear it around the house as a testimate to my mistake. lol
@aurimasdulskis
Жыл бұрын
Do it depends if you try to remove vinyl from the fresh new garment or from the old one? I tested with some old garments and I cant find the way to remove residue glue. For me its impossible to make a garment look like fresh new.
@DesignBundles
Жыл бұрын
Yes, you are correct. Especially if the design has been sitting on a shirt, it would be very difficult to remove the design successfully. This tips are more so to remove a design that was recently placed.- Dawn
@BarbeeDoll77
3 жыл бұрын
Does this work on T-shirt’s you buy from the store as well? Just wondering. I was trying to google this earlier this week! Lol
@DesignBundles
3 жыл бұрын
It should, but only if the shirt is made with heat transfer vinyl, and that is unlikely for a store-bought shirt. Most mass produced shirts are screen printed. Hope this helps! ---Becky
@rosalindalozano233
3 жыл бұрын
Can have be reapplied after using the remover?
@DesignBundles
3 жыл бұрын
Hey Rosalinda! Yes, absolutely it can. I haven't had any trouble with that at all. Hope this helps! ---Becky
@SoirNoirKat
2 жыл бұрын
So I came across this while doing something similar but also different (trying to separate already partially peeling vinyl/faux leather from a fabric based backing). +I don't know how it may/may not work for you, or with various chemicals, but instead of just fingers you might want to consider using a plastic card (old gift cards for example) as a scraping tool.
@DesignBundles
Жыл бұрын
That is a great time and a useful way to reuse an old gift card! - Dawn 🙂
@AbbyDunnMusic
Жыл бұрын
You just saved my project, thank you so much lol
@DesignBundles
Жыл бұрын
Hey Abby! We are so glad we could help! Which method worked for you? - Dawn
@PMoneyExperience
8 ай бұрын
Can you remove it from a jean jacket?
@ms.c3977
8 ай бұрын
Great tips❤
@mardellgrayhek9958
3 жыл бұрын
Thank you so much Becky!!!
@DesignBundles
3 жыл бұрын
Happy to help! 😊
@Illyria1217
2 жыл бұрын
Will goo gone work?
@lofianimegirl8180
Жыл бұрын
Will this work on plastic
@DesignBundles
Жыл бұрын
The heat method will not but I can't see why the liquid wouldn't - Agata
@rabbit9471
Жыл бұрын
Can I wash it right after?
@DesignBundles
Жыл бұрын
Hi there! You can wash it after you use the removal spray! - Dawn
@rabbit9471
Жыл бұрын
@@DesignBundles does it matter if I just put the vinly on even if I didn’t wash it?
@thinkdee_
2 жыл бұрын
Will this work on leatherette
@DesignBundles
Жыл бұрын
Great idea! We could definitely try it! - Brittany
@KG-bt3xi
2 жыл бұрын
Can you use that chemical on a staffed animal to remove an incorrect date ?
@DesignBundles
2 жыл бұрын
Hi Kim! As long as it's HTV, it should work!
@staceydailey6394
3 жыл бұрын
Wow! That's super cool!
@DesignBundles
3 жыл бұрын
Thanks for watching! 😊
@nataliearena2241
Жыл бұрын
It worked 🎉🎉🎉
@marydgoe8063
2 жыл бұрын
Thanks for the tip, I was wondering how to fix my shirt
@DesignBundles
2 жыл бұрын
Thank you for watching today Mary! 🙂 We all make mistakes so these are quick and easy ways to correct them!
@marydgoe8063
2 жыл бұрын
@@DesignBundles Thank you
@paulmcmullan8498
3 жыл бұрын
What temperature did you hear the baby iron up to...
@DesignBundles
3 жыл бұрын
Hey Paul, I set it on the HTV setting, which is the middle light. The EasyPress Mini doesn't have exact temperature numbers, but it should be around 300-320 degrees. Hope this helps! ---Becky
Пікірлер: 199