Nothing pleases me more than when you put the times up. It give me something to route for . Good vid 👍🏼👊🏻
@whorok305
2 жыл бұрын
Running the same system on my TLR Typhon. Mine quickly got hot with a 16t pinion. I'm in S. Florida so it was hot out too. Ended up getting a fan for the motor. Might have to gear it down a bit more.
@standforjesus7427
2 жыл бұрын
Man that thing hauls....takes the jumps like a champ
@allyoucando8486
2 жыл бұрын
if you rise the pinion T, you need a big battery with a lot of amp, but if you gear down you have long run time you don't need big chunk of amps
@just-in-time6069
2 жыл бұрын
Should look in to upgrade your connectors to high amp u would be surprised how much it will make a big difference never thought it did till helped in some tests with connectors with proper equipment and add a cap pack can also help with the sag of the battery alot people under estimate how much those little things help with heat and draw I even use xt90 on crawlers now I run ec5 or bigger on anything bigger than 4s go out and run it way u have it check the temps and then change the connector and u see a big drop in heat I build all type of things with electric motors and it all helped iny hobby with rc's keep up great work and have a wonderful day.
@paulclancy2404
2 жыл бұрын
Definitely we all underestimate this and the extra rtr wires have go unless you going run two batteries .
@rccrawlersmid-wales645
2 жыл бұрын
Wow, that car is amazing - so nimble and quick to accelerate. 👍
@larryholley6771
2 жыл бұрын
I definitely love your input I learned something from watching your video today my rustler 4x4 did the same thing and I never knew what it was now I understand thank you so much.
@rt66rc86
2 жыл бұрын
You always provide the very best when it comes to what upgrades to think about and your RCs are always the best high performance cars and trucks around! This Typhon is one that I have on my list of RCs to get for sure! Thanks for all you do Joe! Us rookies to this hobby appreciate it! :)
@ExocagedRC
2 жыл бұрын
Thank you very much!
@rt66rc86
2 жыл бұрын
@@ExocagedRC It's my pleasure! I've enjoyed watching the "Exoplex" coming along and your Vitavoned out XMaxx and UDR are AWESOME machines! I wish I would have gotten into this hobby when I was a young man! :)
@bashaz8559
Жыл бұрын
Thanks mate that explains the cutoffs of our overpowered Typhon 3s with 3674 2500kv ;-) gotta try the larger lipos and low v cutoff Thanks so much !
@gonzodetroitify
2 жыл бұрын
Absolute awesome show here Joe💯💥 what would have happens had you not caught those lvc settings and you were on 6s Nice of you to share
@timprice8877
Жыл бұрын
I just put this exact G2 combo in my Arma Vorteks 4x4 2 days ago, Absolutely love it, But the fan won’t work on the ESC I tried everything & the ground looks like it’s not getting contact on the plug in.
@damaylaphoenix1155
2 жыл бұрын
i got a 18t pinion on my tlr typhon with the same set up ! my temps are fine with no motor fan. but that was a 85 degree day ! also stock esc setting no turbo!
@damaylaphoenix1155
2 жыл бұрын
also i use spektrum ic5 connectors with are rated for 150 amps where as xt-90 are rated for 90 amps!
@old-rcplane-phart
2 жыл бұрын
Planes, using 3s, 4s, & 6s WE set our volt per cell down to 3.5. i think HW's 'Low' is set at 3.7
@andyb9994
2 жыл бұрын
The Typhon's are cool. I don't have one yet!!!maybe soon🤔
@redndeyes
Жыл бұрын
And another max8 upload....sweet!
@paulclancy2404
2 жыл бұрын
Joe you wouldn't believe how many runs my max 8 2200 kv in my typhon . It's on 3td chassis 2nd motor but that max still working . The wires leads are shot though even at the base lol . Yea the 2200 hw kv was at its limit with typhon= 9.4 lbs has still be geared well the 2050 rtr motors do better even though 4.5 bullets opposed to 6 mm Definitely have gear down with 2500kv I was curious maybe bc gen 2 it work but also higher kv
@thejeepinrealtor5742
2 жыл бұрын
New hobby wing stuff is straight kicking ass. Quietly. 🤣🤷🏼♂️🙏🏼🙏🏼
@GuyonaMoose
2 жыл бұрын
That motor is a beast! To bad you couldn’t hook it up to a castle esc and see it’s true potential
@slarmond38
2 жыл бұрын
Actually.you can. They make the adapter to hook.to standard sensor escs. Bit I doubt a Castle is gonna "unlock" any more potential. Just give you more info on a graph.but Joe can always do a comparison and see
@GuyonaMoose
2 жыл бұрын
@@slarmond38 that’s awesome! I did not know there is a sensor adaptor! Idk in my experience and if you want raw unadulterated power you need a castle mmx8s, in a 1/8 scale car
@hectorgorritz6781
2 жыл бұрын
Wow!! This little thing is cool!!!!
@mikehagquist5198
2 жыл бұрын
Thing flies pretty good
@daltonboucher8162
2 жыл бұрын
Awesome information thanks thumbs up
@joshuajkoplin
4 ай бұрын
After lots of research and my car needing a max of a 68mm length motor this is my best option. Can you tell me how it’s still working for you today or how it played out for you?
@timeflys3322
2 жыл бұрын
Just ordered this system for my wendigo. Hope it doesn't over heat🤞
@TheMdavis07
2 жыл бұрын
Oh man that truck's going to be a beast with a hobbywing G2 setup that would definitely be a build I would be interested in doing I love the wind to go and when you put a good brushless system in it it's a hell of a truck those axles can take as much power as you can throw at them.
@timeflys3322
2 жыл бұрын
From my measurements, it will barley fit. I will let you know how if it works out. Just finished the kit, waiting on electronics
@Shkieletor
2 жыл бұрын
I ordered this combo for my ryft (still did not ship) I wonder how it will drive...
@slarmond38
2 жыл бұрын
Well duh! Lol you went up on kv and up on pinion and medium cutoff. What did you think was gonna happen lol. Good run though that 2500kv is gonna be beast on 4s
@ExocagedRC
2 жыл бұрын
I had to see what it could do but....
@gonzodetroitify
2 жыл бұрын
Hello Sean Why was having medium cut off bad in Joes set up please and how did medium cut off affect his for the worse😳 thank you
@dirtysoufracing6029
2 жыл бұрын
Put that castle x back in with that homles motor
@jonp1116
2 жыл бұрын
Do you happen to have a traxxas rustler 4x4? Would love to see a comparison between the typhon and the rustler with the same hobby wing system
@bevinsracing
Жыл бұрын
I got a bad batch of 4 of those cnhl 4s 5600,mah all of them are junk dropped cells from new won't balance charge and have terrible performance. went to the zeee 6200s there great so far
@ExocagedRC
Жыл бұрын
I’ve been messing with these 5600’s and it seems this system doesn’t like them. Needs to be 6000mah or more
@bevinsracing
Жыл бұрын
Yeah I wanted to like them for my e buggy and truggy associated rc8b3.2s but I can't take the stress of the poor quality cells and honestly they ran like a 3s battery in my track race setups. Idk. I can't see paying 200 for a gena ace but maybe you get what you pay for. I have had more then great success with the cnhl 4s 70c g plus series 5000mah but my local track requires hard case.
@sir_puffs_alott_rc
2 жыл бұрын
Good info. I was thinking about getting the same setup for my typhon. What A Arms are you running
@ExocagedRC
2 жыл бұрын
Those are Vitavon and oddly enough I kinda like em.
@kenneth4098
2 жыл бұрын
Buggies are sweet
@paulrakis
2 жыл бұрын
That's a 6S system right? And your using 4S. Man that typhon Rips alot more punch then the Spectrum system. Definitely pop on a fan heat sink and fan. Maybe a 15T would be better 🤔 or 14T
@paulrakis
Жыл бұрын
Does the g2 esc 6s work with the 1650KV motor guys? I think the 2250kv is way to fast for my kraton XL. To bad they don't make a 2000kv or 2050kv. Well if they do not sure where to find them
@gonzodetroitify
Жыл бұрын
Have you found out yet
@bevinsracing
Жыл бұрын
they make a truggy version in 2150kv it's a 4274 can G3
@paulrakis
Жыл бұрын
@@bevinsracing thanks yeah I'm just gonna keep my spectrum 2050KV set up I love it on my kraton XL. Until it all burns out il get the HW combo 1650KV with the Max 8
@juanvielma7817
8 ай бұрын
Very informative videos. Is it ok for a 4000kv motor to use more than a 3s battery ?
@niz76
6 ай бұрын
4000kv is typically for 2s. Wild on 3s. Probably uselessly fast and dangerous to system on 4s. 4s motors are typically in the 2000-2500kv range.
@rhrc87
Жыл бұрын
anyone know the length of the motor/sensor wires?
@AudiA4Life
2 жыл бұрын
Got a question ❓ am I crazy I did a 6s setup in my 3s Typhon I have a 2650kv motor with 18t n the spectrum 150a esc
@drakorc
2 жыл бұрын
nice video 👍
@Jsmith9619
2 жыл бұрын
Like to see the stock 6s system and how it performs to changing it out to the HW 4s system....or stock system on 4s....just to see the comparison and if it's worth it to upgrade the system or not? Also these are pretty tough stock, not sure the aluminum bits are needed on this one? My Senton has been beaten for years, no failures, 100% stock.
@craigengelman4534
2 жыл бұрын
put a set of proline dumonts on back and fling king jr on front !!!
@sebbbou5455
Жыл бұрын
Nice video! Do you think the 4278 2250kv could be a nice choice too?
@ronniecreason7870
2 жыл бұрын
She’s bad ass
@user-tg2yn8wp3h
Жыл бұрын
how is the balance on those 6s platforms? i have a 3s and want to update. is the aluminum reliable?
@ExocagedRC
11 ай бұрын
The 6s is awesome. These buggies are only as good as you are, so they have almost no limit
@timeflys3322
2 жыл бұрын
Drop that system in wendigo. Will be epic!
@JoeySouthpaw
Жыл бұрын
I'm looking to get just the esc for my 6s kraton rtr, curious about that sensored wire though. since the stock motor doesn't have the sensored wire, will that work?? or can you remove the sensor wire from the esc??
@stephencartwright9792
11 ай бұрын
Naar bro go with the max6.... Kraton is to heavy for max8. Maybe on 4s it will be ok but definitely not on 6s....
@paulclancy2404
2 жыл бұрын
16t for 4s.
@alfredyost7972
2 жыл бұрын
I have found that the "C" rating is also important. If you have a high power system but your battery has a low "C" rating your car will cog. Thoughts?
@timkorn2102
Жыл бұрын
Do you prefer it on 4S or 6S?
@moneyneeded9912
6 ай бұрын
isnt a max 8 g2 6s? or do you run it on 4s for fun?
@paulclancy2404
2 жыл бұрын
And 6 forget About it you need like a 14 or 15 even with the 2200kv too much amps and heat like yoy said
@SchellTech-RC
2 жыл бұрын
What center diff oil are you running?
@ExocagedRC
2 жыл бұрын
Thick like 20m or an earplug
@SchellTech-RC
2 жыл бұрын
@@ExocagedRC thanks a bunch
@lordharr123456
2 жыл бұрын
Ouch an 18 tooth. Too tall a gear buddy!
@jprc1386
2 жыл бұрын
Wayyyyyyyyyyyyyyyyyy to high KV wayyyyyyyyyyyyyy over geared🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥👌👊💪💪💪💪💪💪💪💪💪💪💪💪💪💪
@leigholding1397
Жыл бұрын
Yes , I'm pisst off cause I'm racing my TLR typhon and the guys at the track said you need a 1900 kv or 1400kv. Running a 16 tooth said to hgh but even with the G2 combo I'm restricted to motor choice. So I'll by a max8 pro, and 1900kv. Might get a truggy later and put in the G2 2250kv system
@leigholding1397
Жыл бұрын
Also 200gms lighter to save weight.
@stankovic7150
2 жыл бұрын
Bro! You shuld respect a law! One S per kilo. If your typhoon weight 6kg so you shuld run 6s.
Пікірлер: 76