Nurgle may have tainted my Milliput, but it still works 😁 Edit: Attached some claws to the Tyranid (Short: kzitem.info/news/bejne/omqkxZWqjZV_lqw )
@NigeyWigey
4 ай бұрын
That’s how mine looks, I think it’s just the chemicals in the hardener separating. You mix it up anyway so it’s all good.
@AnotherDayMiniatures
4 ай бұрын
@@NigeyWigey Being told by a literal nurgling that there's no chaos corruption here, just some 'chemicals'. 🤣
@thegdam
4 ай бұрын
Hahahaha 😂
@freddywilliams9837
3 ай бұрын
I kind of like the bright purple. It draws you in as an 'oh cool, Tyranid bio-thingy' before you notice the unfortunate Votann and go 'Oh...'
@AnotherDayMiniatures
3 ай бұрын
It grew on me for the same reason. Easily can spot it, and have that effect. Also RIP Votann 😄
@thingamarobYT
4 ай бұрын
A thing I've seen some other creators do to help milliput/greenstuff stick to a base is to score/scratch up the base first and that helps give enough texture for the milliput to grip to.
@AnotherDayMiniatures
4 ай бұрын
@thingamarobYT I'll have to try that, cheers. Having the whole thing slide off the base is... far from ideal.😄
@cordysepsis9663
4 ай бұрын
Now that is one glorious probe!
@AnotherDayMiniatures
4 ай бұрын
Cheers!
@graefx
4 ай бұрын
Honestly i think things are farm more creepy and grim when theres a calmness and lack of explanation. No tentacles, no obvious way the votann was captured and consumed, just this structure seeming growing out of the corpse.
@AnotherDayMiniatures
4 ай бұрын
That's fair, sometimes less is more.
@Scotty86doo
4 ай бұрын
I know its too late now but I think you could have added some Hormagaunt Scything arms as Claws or the "tentacles" you wanted. Maybe have them stabbing and pinning the Dwarf's shoulders down.
@AnotherDayMiniatures
4 ай бұрын
You know, normally I would agree that it's too late... but this idea is now literally burning a hole in my head. I have a perfect pair of claws I just 'borrowed' from a termagant. I'll try to post an updated picture in the community tab in a few days with the result!
@maxperry4978
4 ай бұрын
One trick I learned is mixing the miliput and greenstuff or better referred to as greenput lol it truelly is the best of both worlds you get the softness and flexibility of greenstuff and the firmness and hardening of the miliput
@AnotherDayMiniatures
4 ай бұрын
Ooo I need to try greenput, I wasn't aware those two are mixable. I guess epoxy is epoxy 😄 Thanks for the tip!
@NigeyWigey
4 ай бұрын
For sure, sticky and pliable when uncured but rock solid and sandable when it’s cured. I still think milliput is best when you’re going for hard edges and greenstuff for when you need a little flex but the hybrid does most jobs brilliantly.
@Matt-md5yt
4 ай бұрын
Sweet diorama/marker my friend
@AnotherDayMiniatures
4 ай бұрын
Thanks mate!
@justWorrik
4 ай бұрын
its looking good i aways like the idea of Xenos ore Chaos corruption even tho i am for the god emperor of mankind fella.
@AnotherDayMiniatures
4 ай бұрын
Cheers! Yeah, I like Space Marines the most, but everything else in Warhammer is just too awesome to ignore :D
@user-zi4wx3uw1y
4 ай бұрын
I love how i have the same miliput and sculpting tools probably because we were both looking for cheap versions on Amazon
@AnotherDayMiniatures
4 ай бұрын
😁Spot on
@AshleyBlackwater
3 ай бұрын
Awesome looking objective marker! Always superglue green stuff/miliput if you can, it holds alot better that way. mixing green stuff and miliput together 50/50 gives you the best of both worlds. The miliput makes it cheaper, hold detail better, and makes it alot easier to thin out, whilst also making it drill and sandable, and the green stuff helps with the amount of detail you can put into it, and makes the final product softer when cured (as opposed to rock hard) I think miliput is supposed to look like that ot, it looks gross but works fine after its mixed :)
@AnotherDayMiniatures
3 ай бұрын
Thanks! Yeah, I really need to remember to try and use that mixture sometime. I still need to find where I misplaced my green stuff :D
@thatergitherrel
4 ай бұрын
I honestly think the osl looks great, if you're not happy about it looking too bright you can try making it the focal point to fix your own perspective. Could try darkening the parts that are further from the mini with more shading and blacks to give the effect that the osl is the only light in the area.
@AnotherDayMiniatures
4 ай бұрын
Cheers mate! I did consider doing a bit more of that, but then I thought I'd risk having to repaint the whole thing again 😄.
@justinmacrae7430
4 ай бұрын
Rad! I love it
@AnotherDayMiniatures
4 ай бұрын
Cheers!
@gabejockumsen
4 ай бұрын
Pink osl is my kryptonite
@AnotherDayMiniatures
4 ай бұрын
😁
@NigeyWigey
4 ай бұрын
I think the pink looks good but you’d make it a little more punchy if you went with a spray of white and then pink over it. Most pinks have horrible opacity so the white underspray does the heavy lifting.
@AnotherDayMiniatures
4 ай бұрын
That's a great point. I should use white undercoats more often for colors in general. Cheers!
@johnnypop-tart335
3 ай бұрын
I triple dog dare you to paint Dante with a sponge
@AnotherDayMiniatures
3 ай бұрын
I don't think I could do him justice even with a brush, NMM is still above my skill.
@cerisekappes580
4 ай бұрын
Really awesome 😊
@AnotherDayMiniatures
4 ай бұрын
Thanks!
@cerisekappes580
4 ай бұрын
@@AnotherDayMiniatures you are welcome 🤗
@RyanF1313
4 ай бұрын
What red did you use? The bright red one.
@AnotherDayMiniatures
4 ай бұрын
That's AK Interactive Deep Red. It's easily the brightest and most saturated red I have. The only downside is it takes a few layers, and it dries a bit more matte than the rest of the range.
@Psycho-Babble
4 ай бұрын
I love how every one of your videos has a "then I tried this, and it went really bad and ruined the whole paintjob, so I repainted it and it looks really cool" moment. Are you fucking up on purpose to stick to your bit?
@AnotherDayMiniatures
4 ай бұрын
😄 I'm an improvisationalist, for better or worse. When the video starts, I often have a single color in mind, and everything else is decided along the way, which is why sometimes it works, and other times, it goes horribly wrong. It's a messy way of doing it, but I think I would get bored far too quickly if I knew the ending to every project before I started.
@Psycho-Babble
4 ай бұрын
@@AnotherDayMiniatures the first video I saw of yours you had broken the spear on your custom SM and pointed it out, which I thought was 1) silly 2) relatable. I think it helps show that everyone makes mistakes, even pro painters, and that when you do, fixing it is just another piece of the process.
@AnotherDayMiniatures
4 ай бұрын
@@Psycho-BabbleAhh, the Obsidian Marauders Space Wolf. I still find it funny how, knowing my luck, it happened after I had already painted the spear. Yeah, I just see it as part of the process and something worth showing. I have scrapped a few projects and videos that just went completely wrong, mainly because at that point, there's nothing worth showing and it feels like a waste of time for the people watching.
@c.mr.bruhitorodriguez8243
3 ай бұрын
Cool
@AnotherDayMiniatures
3 ай бұрын
😀
@cholder9112
4 ай бұрын
Objective Johnson
@AnotherDayMiniatures
4 ай бұрын
It must be captured at all cost before it releases those Tyranid spores! 😄
@G3bbi_
4 ай бұрын
I mean maybe i’m just dirty minded but like
@AnotherDayMiniatures
4 ай бұрын
🥸Not sure what you mean. James Workshop made a great looking cannon. 🤣
Пікірлер: 51