Dude, you saved my project. As old S7200 are a little bit scarce on my area, I got a machine with a dead one that needed replacement and after hours researching for a port tool I found your video. Very precise, it will save days from manual line porting. Really thank you.
@electricalautomation
4 жыл бұрын
Thanks a lot! If you need sth new about S7-1200, Pls let me know or send email to me.
@electricalautomation
3 жыл бұрын
The Software TIA Portal V11 SP2 download link is under the video : support.industry.siemens.com/cs/document/106449434/simatic-step-7-(tia-portal)-v11-sp2-trial-download?dti=0&lc=en-WW
@SmilerBFC
Жыл бұрын
No longer available 😢
@sharief1972
Ай бұрын
Thank you for your effort
@electricalautomation
Ай бұрын
Thanks!
@matgougeon3087
11 ай бұрын
I donated and requested on your Google Drive, thanks!
@electricalautomation
11 ай бұрын
Thanks for your donation, assigned, please check the folder.
@SmilerBFC
Жыл бұрын
Youre the best!
@iL_Sol
3 жыл бұрын
Thanks so much!
@electricalautomation
3 жыл бұрын
You're welcome! Welcome to my channel!
@RicardoCastro-kg2go
7 ай бұрын
Do you have a download link? Any web Page? Is not available in Siemens, now is update and the option to migrate is not appear
@snejik_rd4081
7 ай бұрын
I need tool to remove POU password for microwin smart.If you have plz give me.
@braianbaeza2549
Жыл бұрын
Hi, I installed the software, however there is no converter. Could you share me the link? Thanks in advance
@samuelpereira8524
Жыл бұрын
Hello , I sent a request to view the google drive link for the conversion Tool. can you accept it?
@gervas8457
Жыл бұрын
Hello I installed Tia v11 sp2 but there is no converter. Could you please share the link?
@electricalautomation
Жыл бұрын
Shared, pls check
@hashimadel4561
Жыл бұрын
I want to migrate a project from Step 7 v5.5 to TIA.I tried the built in tool of TIA but it ends with errors. Can anyone tell me the steps of migrating a project??
@electricalautomation
Жыл бұрын
You can use the option 'Migrate Project' in TIA Portal to migrate Step7 project. But I highly recommend reading details on the following two links support.industry.siemens.com/cs/document/62100731/what-are-the-requirements-for-migrating-a-step-7-v5-x-project-to-step-7-professional-(tia-portal)-?dti=0&lc=en-CA; support.industry.siemens.com/cs/document/109478811/migration-guide-simatic-s7-300-400-to-simatic-s7-1500?dti=0&lc=en-CA
@adriannarvaez9042
8 ай бұрын
Ya realicé el procedimiento con la donación, solicito el link de descarga
@electricalautomation
8 ай бұрын
shared, enjoy
@keesmolenaar9431
2 жыл бұрын
Hi, I down loaded the program from siemens but no tool included. Can you share the link to me please? Tanks
@electricalautomation
2 жыл бұрын
You can find the shared link under the video.
@shashibhushanpandey616
4 жыл бұрын
I am looking for conversion of my project. Can u convert my project to TIA.??
@electricalautomation
4 жыл бұрын
You could send me email and let me have a quick look
@mustafajaber6573
Жыл бұрын
Hello, Can you give me access to the tool? I sent a request. Thank you
@miguelzepeda9968
Жыл бұрын
hey there, is it available the S7-200 to S7-1200 program converter tool Link? and works your paypal count for donations?
@electricalautomation
Жыл бұрын
Please use donation link, then your request will be reacted in time. Thanks!
@mohamedhany7525
Жыл бұрын
Hello , I sent a request to view the google drive link for the conversion Tool , I need it in my project , Thank you sir
@electricalautomation
Жыл бұрын
pls check, I shared
@user-sr7mm8nx3m
Жыл бұрын
Please update the link to download the files, siemens removed them from their website
@electricalautomation
Жыл бұрын
Thanks for letting me know, likely the software V11 is not available anymore from Siemens. Let me know your email, I will assign my google drive permission for your to download.
@RicardoCastro-kg2go
7 ай бұрын
Hi, I need that versión, I can't migrate S7200, no option available. Can I get the link to download?
@ivojunior2600
2 жыл бұрын
Is it only possible to convert to at most the tia portal v11?
@electricalautomation
2 жыл бұрын
I would say yes. I can use higher TIA Portal version to open the V11 project after you upgrade. Note that you have use TIA Portal v13 sp2 open it firstly, then use >=14 open the V13 sp2 project.
@ivojunior2600
2 жыл бұрын
@@electricalautomation And so on until the V17?
@francodanelutti4071
3 жыл бұрын
do you have the links for download the tool S7-200 to S7-1200?
@electricalautomation
3 жыл бұрын
Hello, as I introduced in the video, there is no available official link to download the S7-200 -> S7-1200 tool anymore. But you can download TIA Portal V11 SP2. You can find the link under the video.
@SY-sc9gx
2 жыл бұрын
Hi, i installed all on a Windows 7 Runtime. The converter is not existing. Can you accept my Download request? Thank you already
@electricalautomation
2 жыл бұрын
Shared the link to you, please check.
@SY-sc9gx
2 жыл бұрын
@@electricalautomation Thank you, do you have also a video for Wincc 2008 to Tia?
@harshasami6758
2 жыл бұрын
How to convert s7-200 t0 s7-1200 Tia portal V16 is possible sir
@electricalautomation
2 жыл бұрын
Hello my friend, you need TIA Portal V13 incl. SP1 or TIA Portal V13 incl. SP2. The migration path is TIA Portal V11 -> TIA Portal V13 SP1/SP2 -> TIA Portal >= V14. It looks weird, but it is true, you need v13 SP1/SP2 as the interface.
@ngocsonchu9431
3 жыл бұрын
new app of siemens havn't this funtion? i mean v16, v17
@electricalautomation
3 жыл бұрын
No, only TIA Portal v11 sp2
@hajarsikal3527
Жыл бұрын
Hello , I sent a request to view the google drive link for the conversion Tool. can you accept it? , I need it in my project , Thank you sir
@electricalautomation
Жыл бұрын
Accepted, enjoy it.
@hajarsikal3527
Жыл бұрын
@@electricalautomation thank you very much. can you tel me how it works ?
@gilbertdevera3339
3 жыл бұрын
Hi sir do you have idea to migrate micro win to tia V16 please help me
@electricalautomation
3 жыл бұрын
You can send me a email and attach the S7-200 program, I can have a look. Email address can be found at the beginning of the video.
@gilbertdevera3339
3 жыл бұрын
@@electricalautomation do you have email
@gilbertdevera3339
3 жыл бұрын
@@electricalautomation can i get your email address sir
@felipecastro7867
3 жыл бұрын
@@gilbertdevera3339 his email is displayed in the beggining of the video
@rockstarsoulipn
Жыл бұрын
Hey dude. Could you share me the link? please
@electricalautomation
Жыл бұрын
Shared, please check.
@ngocsonchu9431
3 жыл бұрын
it can run on win 10 64bit?
@electricalautomation
3 жыл бұрын
No, TIA Portal V11 SP2 is only compatible with WinXP and Win7. I talked the OS issue in the video.
@ngocsonchu9431
3 жыл бұрын
Thanks.
@muhammadhakim3982
Жыл бұрын
I already donate to you. Can you approve my request download? Urgent matter.
@electricalautomation
Жыл бұрын
approved, please check, thanks for your donation
@brunoalcocer7528
11 ай бұрын
Hello , I sent a request to view the google drive link for the conversion Tool. can you accept it?
@yoseanbarrueta6393
Жыл бұрын
Hello , I sent a request to view the google drive link for the conversion Tool. can you accept it?
@electricalautomation
Жыл бұрын
I didn't get your request, may be you can try to apply again. Also please read my comments under the video carefully
@yoseanbarrueta6393
Жыл бұрын
@@electricalautomation listo
@panchajanya8615
Ай бұрын
@@electricalautomation brother please share the gdrive link.
Пікірлер: 72