Hacking Tesla CAN-BUS over Wi-Fi using Raspberry Pi Zero 2W + CANable 2.0 with uConsole Raspberry Pi CM4 and USB/IP over Wi-Fi.
My setup using the Maxwell Technologies cable for late Model S/X Tesla. While the Tesla CAN-Bus has 6 channels my focus is CAN6 Chassis using only a single CANable (Opensource) USB module, Raspberry Pi Zero 2W, and +12v to +5v DC-DC Step Down converter (taking power from Tesla's custom ODB (20 Pin) connector, and an RPi microUSB data cable cut and spliced in for +5v power. Small PCBs with wired or soldered connections should to mount to a small project board, I used one from C4Labs I had lying around, but it could be a small piece of wood or acrylic. You might have noticed my Clockwork uConsole is sporting a new 3D printed stock Wi-Fi antenna mount from m3x, I've include a link for that below.
#uConsole #Tesla #RaspberryPi #Wireshark #SavvyCAN
In-vehicle tests performed on a secret Tesla Model S aftermarket Concept Conversion I've been working on in conjunction with...
more info on that later 🫥
Raspberry Pi is a trademark of Raspberry Pi Ltd
www.raspberrypi...
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/i...
License code: I78IHDZ3JBTJKED9
Helpful SSH tools I used with CLI on Raspberry Pi Zero 2W and CM4
github.com/tai...
holzschu.githu...
Required: Install from CLI on Client and Server
`sudo apt-get install can-utils`
`sudo apt-get install usbip`
Parts/Components Sources (non-affiliate)
CANable Pro 2.0 www.aliexpress...
Maxwell Tech www.ebay.com/i...
MDFLY www.ebay.com/i...
World Chips www.ebay.com/i...
uConsole:
Clockworkpi www.clockworkp...
uConsole 3D Printed Antenna Mount by m3x
www.printables...
Debian 12 Bookworm apps:
`sudo apt-get install wireshark`
Advanced:
Debian 12 build from source only, Qt Kernel update may be required
github.com/col...
DBC files for SavvyCAN:
docs.google.co...
docs.google.co...
Негізгі бет uConsole Raspberry Pi CM4 + Raspberry Pi Zero 2W USB/IP over Wi-Fi
Пікірлер: 9