Probably the cleanest yet simple build I've seen. I will be modding my build after this
@popey2710
5 жыл бұрын
This is by far the best looking "ugly" I've seen. That bottom vent is an incredible idea. Thanks heaps for the video. I'll definitely be watching this again and again as I build my own.
@MidwestFreak
5 жыл бұрын
Thanks for the comments .
@NoxapaterBBQ
5 ай бұрын
Been watching a ton of these for ideas for my drum build and yours is the best
@timothypirnat3754
4 жыл бұрын
One of the best UDS builds I've seen on KZitem. Very well thought out.
@MidwestFreak
4 жыл бұрын
Thank You buddy .
@normanham8566
3 жыл бұрын
Timothy Pirnat I agree. Well thought out & simple design.
@bassworship50
6 жыл бұрын
Man, you did an excellent job on that UDS. I hope you enjoy it because it is beautiful and you put a lot of knowledge into it. I've already built one and I absolutely love it, I'm going to build two more and I will take some of your ideas. Thank you for sharing.
@MidwestFreak
6 жыл бұрын
Thanks buddy
@Orcanian66
2 ай бұрын
Great job. Thanks for sharing. I like the bottom vent idea.
@MikeSchenk
4 жыл бұрын
Love the idea for the charcoal starter. Between your video and one other, my UDS should be SWEET!!!
@tommysmith6914
5 жыл бұрын
This is my favorite UDS yet...Great Job!
@MidwestFreak
5 жыл бұрын
thanks
@progers5019
5 жыл бұрын
Nicely done. Thanks for sharing your time and video. I gots the UDS fever again. Had it 2.5 yrs ago, then got a wsm. Now, the fever is gettin on me again to build one. lol
@MidwestFreak
5 жыл бұрын
I sold this one and want to build one again too .
@backyardgrillmaster2910
5 жыл бұрын
Man you knock this video out of the park!
@normanham8566
3 жыл бұрын
Nice build and good video. Thanks! I’m planning on building an UDS next month. I was glad to see a DIY UDS using the Hunsaker air intake system. I’m going to use it too.
@MidwestFreak
3 жыл бұрын
Thanks and the Hunsaker vent is the wat to go and the wind does not affect it since it is on the bottom .
@Polamish
4 жыл бұрын
Beautiful, Simple, Very well thought out. I love mine
@MidwestFreak
4 жыл бұрын
thanks
@brianwright6932
6 жыл бұрын
This is an work of art!!! Beautiful
@MidwestFreak
6 жыл бұрын
thanks Brian .
@neilthompson2871
3 жыл бұрын
Wow that little sguare sander in 45 min!?! All around the ribs with no scratch marks . U are the man!
@MidwestFreak
3 жыл бұрын
thanks and that little sander worked great .
@Phoenix-pv3wu
4 жыл бұрын
Very interesting. Tks for the ideas, and the video.
@_dave4460
5 жыл бұрын
like that you started with a new barrel. i’ve seen so many grills made with bent up, rusted messes and so much time and nice hardware on it to justify. painting it every few years and sandblasting will help it last longer. nice job!
@MidwestFreak
5 жыл бұрын
thanks and new barrel is the way to go and much easier to prep .
@philfreiberg3
5 жыл бұрын
Thats awesome mate. Looks amazing. Love your dogs and the bug sounds in your vid.
@uglyfacebutthead2446
5 жыл бұрын
That’s got to be one of the nicest ones I’ve ever seen good job 👍
@MidwestFreak
5 жыл бұрын
Thank You very much and just could not make it ugly , lol .
@benderrover7542
6 жыл бұрын
good job, inspired me to make one myself now.
@BackyardSmokeMasterBBQ
5 жыл бұрын
You. did an outstanding job on the UDS & the video! Very nice!
@MidwestFreak
5 жыл бұрын
Thanks.
@kennethdavis5563
5 жыл бұрын
Getter done.
@kevinh9333
7 жыл бұрын
Nice build and sweet Doberman! 👍
@MidwestFreak
7 жыл бұрын
thanks and can not take a pic of him but when doing a video I can get a drive by shot of him , lol .
@Brownknuckles007
6 жыл бұрын
I like the idea of the 2 bolts on the side so the lid don't hit the side of the barrel. Good idea
@MidwestFreak
6 жыл бұрын
thank you sir .
@Fins-Scales-and-Tales
6 жыл бұрын
Awesome Build!!!
@MidwestFreak
6 жыл бұрын
thanks
@travisminton2141
3 жыл бұрын
Nice build! You definitely put a lot of thought into it.. I'm looking into building my own and doing lots of research. I've got a barrel of unknown origin, but it's in good shape. Light coat of rust inside, no oily residue, matching lid. Paint is faded on outside but after a good hot burning to remove any possible chemicals it'll likely burn off the paint then I can sand and repaint with hi-temp stuff. I plan to cut the intake hole in the bottom for the burn in so it'll help get it nice and hot. Might even hook a pipe up to the leaf blower or shop vac to force air in for the initial burn. Since I don't know the history of the drum I want to burn it as hot and long as i can so nothing will come off during cooking later on. I am keeping an eye out for food grade barrels too. I have a feeling I might make a second one if I like the first one a lot, LOL. Anyway I'm seriously looking at the Big Poppa Smoker kit for the first build, but thinking of substituting out the sliding side intakes for upright intakes so I don't have to bend over every time I need to adjust the temperature/vents. Your bottom vent is a cool idea. Also dig your wheel and tripod style base. Makes it easy to move around. Thanks for sharing your build. Let us know how your food cooks in it.
@h1989w7373
6 жыл бұрын
Great job,I want one badly
@dgblac0
10 ай бұрын
Great video
@g.a.t.1960
6 жыл бұрын
Dude...awesome job.
@MidwestFreak
6 жыл бұрын
thanks
@kyletracey5819
5 жыл бұрын
Fantastic build !! Keep on smoking. Cheers from canada. Im watching vids on the back deck as my smoker has baby back ribs on the go ! Dont use the bbq much anymore. Just burgers maybe. Haha!
@MidwestFreak
5 жыл бұрын
Thanks
@neilthompson2871
3 жыл бұрын
I do like ur idea of the little can.
@MidwestFreak
3 жыл бұрын
thanks
@jlawb
Ай бұрын
Man, this is a dope build! The only thing i would add is a lid hinge.
@leecampbell2477
6 жыл бұрын
thats bad ass, just got my barrel, ready to do it
@steven_farmer89
6 жыл бұрын
Shouldn’t the barrel handle be on the same side as the wheels? Looks good
@jfennell32
6 жыл бұрын
Great job
@shaeschembri825
5 жыл бұрын
Best one iv ever seen
@johnwatz4955
3 жыл бұрын
Great video, wasn’t aware that Hunsaker sold any kind of a kit.
@MidwestFreak
3 жыл бұрын
not sure if he still does but use to be listed on his website .
@vincentleo6407
4 жыл бұрын
Thats a awesome barrel real good job
@MidwestFreak
4 жыл бұрын
Thanks
@jofieh.5302
7 жыл бұрын
Dude that came out bad-ass.
@MidwestFreak
7 жыл бұрын
thanks
@ShanePienaarEdge
4 жыл бұрын
Awesome UDS. are you able to list all the materials and links to where you got everything?
@joebrindisi2588
6 жыл бұрын
Nice Job!!! I have the barrel and just need the parts to get started. Where did you get the probe port and what is the stock number? The information on the bag was hard to read from the video.Again GREAT job!!
@MidwestFreak
6 жыл бұрын
it is a MM/SE UF cable connecter 3/4" part # 49093 and got it from Home Depot
@easybackyardbbq
7 жыл бұрын
Looks good. They cook really well. Hope you been doing good
@MidwestFreak
7 жыл бұрын
thanks buddy .
@Not_scammer357
4 жыл бұрын
Awesome. The best simple barrel so far. Is there any blue print or diagram with the measurement.
@Not_scammer357
4 жыл бұрын
The cover, bottom frame, chimney etc.
@joebrindisi2588
6 жыл бұрын
Thanks for the info and quick response!
@MidwestFreak
6 жыл бұрын
Joe Brindisi no problem and here to help .
@hd2kill
6 жыл бұрын
Sweet build
@MidwestFreak
6 жыл бұрын
thanks
@davidtappe5337
4 жыл бұрын
Good job sir. How’d it turned
@richwallace4632
4 жыл бұрын
Would love to get the parts list you used on your smoker, or where to find them. Thanks. Nicest smoker I’ve seen.
@MidwestFreak
4 жыл бұрын
most of them i bought at Hunsaker drum smokers online .
@letsrolljg7559
3 жыл бұрын
What's was the grit on the sand paper you used? Came out good
@craigluhr3034
3 жыл бұрын
That's a good looking drum.
@MidwestFreak
3 жыл бұрын
Thanks .
@njoysuccessnow
2 жыл бұрын
Really smart build. Do you recall the name of the company in Kansas that sells the steel drums?
@travisdalton3329
5 жыл бұрын
Nice I might steal your idea for your lid holder good idea
@truthbknown4957
5 жыл бұрын
Nice!
@ShanePienaarEdge
4 жыл бұрын
Awesome video. What digital thermometer do you use?
@leecampbell2477
6 жыл бұрын
the basket come from Hunsacker smoker also?
@nickkinney1932
4 жыл бұрын
Hello! I am also in Kansas City. Do you mind posting some information about who you bought your drum from?
@jonathanbushnell1147
7 жыл бұрын
This is really nice. 2 questions - 1) why did you choose a bike peg for stabilization? Do they have some give? 2) Is there a reason you put the handle opposite the wheel side? I was assuming I would put it on the on the side with the wheels to make rolling easier. Again, beautiful work. Hoping mine turns out half as good.
@MidwestFreak
7 жыл бұрын
I used the bike peg because with the wheels it set perfectly level and got 20 of them just collecting dust that the kids took off their bikes . the reason for putting the handle on the front is to be able to lift the peg off the ground and steer the drum like a dolly . putting it on the side you would not be lifting the drum unevenly and you could put it on the side but would not work for me that way .
@kmmining1359
4 жыл бұрын
looking good bro...
@MidwestFreak
4 жыл бұрын
thanks
@williamwilkinson8289
3 жыл бұрын
I was given a UDS from my neighbor I have never heard of such a thing what paint can you use to paint it? Mine is an ugly grey and I’m thinking about tacking on wheels to it because of its heavy weight
@michaelstavely8769
4 жыл бұрын
What was your cook time to charcoal fill ?
@Just8Ate
5 жыл бұрын
Great tips buddy thanks 8)
@MidwestFreak
5 жыл бұрын
You are welcome buddy .
@MidwestFreak
3 жыл бұрын
I used Rust-Oleum High Heat Satin Bar-B-Que Black Spray Paint
@jerryees
4 жыл бұрын
Where did you get the charcoal basket?
@chrishernandez595
7 жыл бұрын
Thats a good lookin uds man. What is the basket made of. Didnt catch that in the vid if u mentioned it. Good job
@MidwestFreak
7 жыл бұрын
i bought it off BBQ Smoker Supply Company online for $62 and is a Lava Lock 12 X 12 X 12 basket but if you can get 16 gallon drums you can build a basket real cheap and will be posting a video up in a few weeks of making it .
@larrytrevino7119
4 жыл бұрын
Do you have a pic of the bottom damper pattern?
@mikebaeza8902
5 жыл бұрын
Great video and awesome build. Did you use primer before the paint?
@MidwestFreak
5 жыл бұрын
yes and used high heat primer .
@craigwheaton2506
6 жыл бұрын
Nice job bro
@MidwestFreak
6 жыл бұрын
thanks .
@gabrielfernandez566
5 жыл бұрын
Thanks for the links 👍🏻
@MidwestFreak
5 жыл бұрын
no problem buddy .
@MikeJones-yf2xx
6 жыл бұрын
With 4 air holes at the bottom is that enough to keep the fire on 250 with the lid closed?
@MidwestFreak
6 жыл бұрын
there is actually only one hole and the other small ones your seeing is the bolts that hold the Hunsaker vent in place and yes it is big enough and can cook at any temp you want .
@coreyhollandsworth5245
Ай бұрын
What digital temp gadgets are u using
@hdbagger4266
6 жыл бұрын
when you need to put more charcoal or wood in ,do you have to take all your meats out to add more fuel??That seems like it would be a pain in the ass if you have to add more fuel and take out what your cooking,could you make like a door on the side to add more charcoal? Just curious thinking about building one. Nice build and video
@MidwestFreak
6 жыл бұрын
I never had to add charcoal because I could get such long burn times with it .
@hdbagger4266
6 жыл бұрын
thanks for the reply
@williegreen7531
5 жыл бұрын
How much coal you usually use
@billyjoe1666
6 жыл бұрын
What's the name of the axle you used to attach thw wheels? Get it from any hardware store correct?
@MidwestFreak
6 жыл бұрын
Hunsakersmokers,com sells them
@georgenettlesjr1466
6 жыл бұрын
Where did you buy that bottom vent I would like to get one I love it
@MidwestFreak
6 жыл бұрын
George Nettles Jr Hunsaker smoker sells the vent kit and real easy to install .
@bryanshirah5507
3 жыл бұрын
Every barrel I have seen on here is a ring top. I have a sealed barrel looking for the easiest way to cut the top out and be able to seal back without having to build a new top
@MidwestFreak
3 жыл бұрын
I think i remember seeing a person grinding the edge all the way around but not sure . I would just try and find another barrel on crags list .
@antoniotaylor8758
7 жыл бұрын
Man, this did turn out good....I need one made. Did you buy all the supplies for the UDS from the BBQ supply company? I like the wheels and bike peg configuration.
@MidwestFreak
7 жыл бұрын
Antonio Taylor the axle and vent i got from Hunsaker smokers and the stack and handels i bought The BBQ Supply Company . My kids always take the pegs off thier bikes and wanted to something different and it just happened to work out , thanks for checking it out .
@antoniotaylor8758
7 жыл бұрын
One more question...What type of drum did you buy? Im looking on their site and there are a few options on the open head drums. Was it with the lever or bolt ring? I assume you got the non UN rated drum. Thanks.
@MidwestFreak
7 жыл бұрын
I bought a new heavy duty steel drum with the metal bolt ring new from a container company in Kansas City for $48
@dsc7154
6 жыл бұрын
Man that's a nice uds... I tried reading all the comments before asking and my question was answered but couldn't find "The BBQ supply company" was looking for the stack and handle. Could you post a link to the exact website please and thanks.
@MidwestFreak
6 жыл бұрын
I might of said the wrong pace but here is a link to the store bbqsmokersupply.com/uds-parts.html
@dsc7154
6 жыл бұрын
Thanks again sir!
@bkonyqb
4 жыл бұрын
Where did you get the bottom air flow from and what size crates
@MidwestFreak
4 жыл бұрын
Hunsaker smokers sells the kit and not sure of what you mean by crates ?
@malvizar85
5 жыл бұрын
Just curious what was the complete total cost to build this smoker? Nice job 👍🏼
@MidwestFreak
5 жыл бұрын
I got $160 in it .
@MrLaker9900
5 жыл бұрын
What grit sandpaper did you use? and how is your smoker holding up?
@MidwestFreak
5 жыл бұрын
I used 60 grit at first and then came back over it with 150 grit to smooth it out . The paint held up great but the 16 gall barrel that went around the fire basket helps saves the paint too .
@nathanielsamson5030
6 жыл бұрын
How did you removed the lid with a nice cut?
@MidwestFreak
6 жыл бұрын
you can buy them with the removable lid and just in-bolt it .
@deanleach7985
7 жыл бұрын
where did you get the damper on the bottom?
@MidwestFreak
7 жыл бұрын
Hunsaker Smokers , just do a google search and they are located in St. Louis , Missouri . I love their vent because wind does not affect the cook and you can adjust it with your foot and not haft to bend over .
@JOMULQUILLO
4 жыл бұрын
Awesome build. Kind of a dumb question but do you send the inside as well or just the outside?
@MidwestFreak
4 жыл бұрын
i just bunt it out because it had no liner on the inside .
@JOMULQUILLO
4 жыл бұрын
@@MidwestFreak thank you for the quick response
@earnestbrown2643
4 жыл бұрын
Could you describe those cable connectors? I went to Shirleys Fab and the website is messed up?
@earnestbrown2643
4 жыл бұрын
I found some through: Sigma Electric ProConnex 3/4-in Uf Cable Connector Conduit Fitting
@jeremysillo5540
4 жыл бұрын
When u did your fire to clean everything out did u have any holes in your barrel?
@MidwestFreak
4 жыл бұрын
no
@jeremysillo5540
4 жыл бұрын
@@MidwestFreak thanks
@nigelbarrow6615
7 ай бұрын
Hi Can you send me the measurement for your basket please
@brianwest5339
3 жыл бұрын
Do you remember what brand paint you used on the outside?
@MidwestFreak
3 жыл бұрын
It was the satin Rust-Olum BBQ paint .
@kayakkong7884
4 жыл бұрын
I got me a barrel and gonna burn it out. Does it matter if I use treated wood in fire? I figure it would be ok since I'm just burning it out. Need some input.
@MidwestFreak
4 жыл бұрын
I wouold think it would be okay and I used fire wood on mine .
@kayakkong7884
4 жыл бұрын
Went ahead and emptied the debris and used some reg burn wood I got from gas station. To make sure it burned clean. Gonna let this finish and burn another sesh. Just in case. Have to have the barrel smelling like treated wood.
@BK33REVIEWS
3 жыл бұрын
Where did u get the cable connector
@MidwestFreak
3 жыл бұрын
Are you talking what i ran the probe wires through ? You can get them at any hardware store .
@Serpent32776
4 жыл бұрын
Where did you buy the lower valve from?
@MidwestFreak
4 жыл бұрын
Hunsaker drum smokers sells them .
@BK33REVIEWS
Жыл бұрын
Nice build you still use it if so how is it holding up
@MidwestFreak
Жыл бұрын
I sold it but was a great smoker and wanted to try a drum out but held temps great and steady.
@od1ouswarrior28
3 жыл бұрын
What’s grit sandpaper did you us?
@MidwestFreak
3 жыл бұрын
I used 150 to get the paint off and then came back over it with 320 .
@sardomnumspa
5 жыл бұрын
I am in Kansas City, so where did you get it? LOL
@sardomnumspa
5 жыл бұрын
BBQ Freak THANKS!
@gabrielfernandez566
5 жыл бұрын
Where did u get the hardware from, any links, beautiful design
@MidwestFreak
5 жыл бұрын
vent and wheel axles from www.hunsakersmokers.com/collections/all and stack from udsparts.com/
@dessertman1181
5 жыл бұрын
How about a water pan??
@rustykc
7 жыл бұрын
Hey where in KC did you find that barrel?
@rustykc
7 жыл бұрын
BBQ Freak Thank you! And sorry, I dont know where my manners went. You made a great video as always and I've been kicking around the idea of making an ugly drum so this video was perfect timing! Thanks for posting this video. Again sorry for just blurting out my question, I was just excited by the video. Have a great day buddy.
@MidwestFreak
7 жыл бұрын
it is cool Rusty and glad i could help you out and this is what i do buddy .
@leecampbell2477
6 жыл бұрын
get on craigslist just bought one already burned and painted $25 . a guy in Lee summit does them
@confirm1022
5 жыл бұрын
Where did you order the handles ?
@MidwestFreak
5 жыл бұрын
from The BBQ Supply Company
@esparza40oz
4 жыл бұрын
Where did you buy the n/se connector
@MidwestFreak
4 жыл бұрын
I got it from Home Depot but you should be able to buy at any hardware store .
@esparza40oz
4 жыл бұрын
BBQ Freak i looked for one online but could not find one like that
@reggiewise1128
4 жыл бұрын
where did you get the axle
@MidwestFreak
4 жыл бұрын
I bought it from Hunsaker Drum Smokers .
@ConfedVet
6 жыл бұрын
How many cans of spray paint did you use?
@MidwestFreak
6 жыл бұрын
4 cans .
@nacojefe7323
4 жыл бұрын
BBQ Freak What exact Can of paint/brand did you use? t’s been 2 years but hoping You can respond.
@jonathandueck355
5 жыл бұрын
How do you open the barrel in the first place ?
@MidwestFreak
5 жыл бұрын
not understanding your question ? you lift the lid off ?
@mikekempe7555
3 жыл бұрын
If you have a sealed drum, get hold of an angle grinder. Tip the wheel about 30 degrees inside the lip and gently grind down to the seal all the way round. A sharp smack with a hammer, and it’ll drop into the drum leaving a nice neat even open top, with the rim still intact to seal nicely with an old Webber lid.
@junkcarz4720
3 жыл бұрын
Can you roaster corn in it
@tonymichaud8683
6 жыл бұрын
For something like that you want it nickel plated NOT chromed. Chrome turns blue with the heat. Nickel does not.
@levernarethomas2505
6 жыл бұрын
sweet smoker I live in Kansas city build me one I will pay you!!!
@MidwestFreak
6 жыл бұрын
I could make this happen if you buy all the parts needed .
@levernarethomas2505
6 жыл бұрын
sweet and yes exactly like that one you did. yes let me know how much for all the parts and then what you will charge. by the way that was a beautiful smoker.
Пікірлер: 187