Man, I've been trying to get my van to you guys for over a year and BAM! Lost my job. 95 E350 with only 140,000 miles on it with schaeffers oil since 104,000 and oil analysis shows schaeffers is doing an absolutely awesome job keeping it clean and well lubed, as wear metals are super low. That BTS transmission will like schaeffers too. Hopefully I'll get a chance one day, just got to keep dreaming!!!!!!
@barnswallowtinyhomes2990
Жыл бұрын
This is freaking awesome. I’ve long been a 7.3 diesel enthusiast because of my f-250 pickup long before getting into vans/tiny houses. This is an incredibly built chassis. Better than freaking new by a long shot. So jealous!
@ujointoffroad
Жыл бұрын
Thanks! It was a fun project!
@emsforlife444
8 жыл бұрын
Thanks very much for the video! I have a 2003 E350 van with the 7.3L diesel and it's great to see what's possible to do with it. I wish that Ford had started out with the great battery tray that you've come up with. The stock frame-rail mounted tray is VERY difficult to deal with for those of us who don't have a vehicle lift at home ;-) Fine craftsmanship; you obviously care about the quality of your work and it shows. :-)
@ujointoffroad
7 жыл бұрын
Thanks very much!
@Sig721Tau
7 жыл бұрын
EMS ForLife Idk that Ford put a 7.3L Powerstroke in their Econoline Vans.
@PepeDeezNutz
8 жыл бұрын
Work of art
@dougharker9913
7 жыл бұрын
VERY NICE UNIT !! CLEAN !! BUILD
@rickyboyz100
8 жыл бұрын
Totally amazing!!! Tell them when they come up here to Ontario, I wanna see it!
@AFog86
8 жыл бұрын
This is going to be quite the AlphaVan.
@peewee7405
6 жыл бұрын
This is a frame that could be used for almost any body combination, it's long and flat ect, looks great for a conversion.
@snarkylive
3 жыл бұрын
Be nice if they boxed up the next one
@jeepcollector91
8 жыл бұрын
Nicely done.
@mordicuspb
8 жыл бұрын
incredible
@nick_intheskoolie8840
3 ай бұрын
My1999 7.3 e350 has an front mount intercooler 😁
@rooster7658
3 жыл бұрын
Gonna be a killer rig fellas
@rooster7658
3 жыл бұрын
Now that is how ya do it
@blueman5924
Жыл бұрын
Alternater down low, so closer to getting flooded on river crossings ? Seems the opposite of the off road purpose it’s built for. 🤷♂️ Love the renewed frame and everything though. 👍
@ujointoffroad
Жыл бұрын
Lots of rigs have an alternator down low, had to put it there (factory dual alternator location) to make room for the intercooler.
@Alpha-to9od
7 жыл бұрын
nice built.
@ujointoffroad
7 жыл бұрын
Alpha1 thanks!
@winnabegobob1547
4 жыл бұрын
These Van's r beast
@Waterskilakeaustin
4 жыл бұрын
Bravo!
@motroo1
7 жыл бұрын
Hey Chris, I'm sure you have your plans for the intercooler, but have you considered raising the hood, or installing some kind of hood scoop type framing for installing the intercooler in the hood like the hummers did? Just a thought.
@ujointoffroad
7 жыл бұрын
We've mocked up a 6.0 intercooler & radiator, going to work well
@TheBadSeed3094
3 жыл бұрын
Pics of how this turned out? Specifically the intercooler on a 7.3 van setup. Much appreciated. Thank you and wonderful work 👍
@lolMyke
8 жыл бұрын
Take my money ! Lmao
@Spaceman-jo5mz
3 жыл бұрын
Bad ass...
@mikenicholas6560
3 жыл бұрын
This is AWESOME!! I have a 2000 7.3, getting ready to start the chassis on it! This is inspirational! I want to add the intercooler too, this is very helpful. Low mount alternator is key! Is this a 6" or 8" lift kit?
@ujointoffroad
3 жыл бұрын
Thanks! It was a fun build! This is 6"
@thelaststarfighter
7 жыл бұрын
I would like to buy that triple battery tray.
@ujointoffroad
7 жыл бұрын
Sorry we're not making it. Requires a full re do of battery cables and that doesn't make sense for most guys.
@motroo1
7 жыл бұрын
Hey Chris, check out this link. If you don't know about them already, they make flared out fiberglass fenders for the ford vans. www.weldtecdesigns.com/product/ford-e-series-fiberglass-fender/
@ujointoffroad
7 жыл бұрын
They're made by Glassworks, I tried to get a set years ago for V4 and it was a fiasco. Told me they shipped, couldn't provide tracking, back & forth and I had a deadline. Wound up having to get the CC company involved. Nice pieces though! If you can get them.
@deanslegos1990
7 жыл бұрын
😍
@austingeorge7078
8 жыл бұрын
bad fuggn ass!
@motostyx4714
4 жыл бұрын
Is the owner financing this vehicle? What’s the total? I’m looking to build a van and I’m curious if it’s cheaper to buy it directly built from you guys instead of getting it on my own and then having the different companies do their part. Thank you.
@ujointoffroad
4 жыл бұрын
He didn't finance it, total cost once the interior was done by SMB was in the 170k area.
@willsimmons2021
6 жыл бұрын
How much would a build like this cost
@ujointoffroad
6 жыл бұрын
Total for the entire rig will be in the 150k area
@JeepITguy
6 жыл бұрын
What's the deal with the rear axle pinion angle?
@JeepITguy
6 жыл бұрын
Nevermind, I see you mentioned that in the video.
@ujointoffroad
6 жыл бұрын
Need weight on the springs before setting the pinion angle
@Alpha-to9od
7 жыл бұрын
would it be better to use a 4bt?
@ujointoffroad
7 жыл бұрын
Alpha1 I don't think so, that would add a large amount of complication and it wouldn't be the best choice for the customer
@grld0cheerleadin
4 жыл бұрын
Are these transfer cases manual Shift I hope 🤞?
@ujointoffroad
4 жыл бұрын
Yep! Always
@davidwitcher5443
4 жыл бұрын
Where can a guy find that alternator bracket?
@ujointoffroad
4 жыл бұрын
From a factory 7.3 with dual alternators.
@davidwitcher5443
4 жыл бұрын
@@ujointoffroad Thanks for the reply. I've searched and found the part numbers but unfortunately the parts are discontinued.
@JohnSmith-qj4cf
3 жыл бұрын
Do you sell just a bracket kit for front for conversion
@ujointoffroad
3 жыл бұрын
We just sell complete kits, ck out our website
@JohnSmith-qj4cf
3 жыл бұрын
@@ujointoffroad that makes good marketing ! Strategy !! Thks its given me ! "A" idear !!
@ujointoffroad
3 жыл бұрын
@@JohnSmith-qj4cf It's more about QC and protecting the brand ;)
@JohnSmith-qj4cf
3 жыл бұрын
@@ujointoffroad yes ! I do understand ! Was looking at ! Options !!
@craigmaurer4832
Жыл бұрын
What bolts did you use
@ujointoffroad
Жыл бұрын
For which part?
@craigmaurer4832
Жыл бұрын
@@ujointoffroad just looks like new bolts, I’m building a chassis and those bolts look good
@ujointoffroad
Жыл бұрын
@@craigmaurer4832 Gotcha. We used a combo of grade 8 and stock Ford hardware.
@danielsundberg1977
5 жыл бұрын
Hope they don't want to do any water crossings, that catch can will suck water straight in!
Пікірлер: 62