amazing work once again. This channel is so underrated.
@madebykm
2 жыл бұрын
Thank you 🙏
@supenvt
Жыл бұрын
Just discovered this video. Contrary to many DIY canister filters, it's obvious this one has been throughoutly thought! Up to using a siphon as an inlet so it's easier to fill the filter. I have no problem believing it actually works in real conditions.
@madebykm
Жыл бұрын
Yes, it works great, thank you 👍
@GauravBirla
2 жыл бұрын
I have made several Canisters and all sort of filter over the years. BUT, I always had issues creating a good flexible inlet assembly for smaller canisters, today I learnt that too. Amazing video like always. Waiting for more such wonderful videos.
@madebykm
2 жыл бұрын
Thank you :-)
@saumensabui2379
2 жыл бұрын
Kya usmae apko overflow ki dikkat yi hai?
@aquaniii
2 ай бұрын
Bro such a useful video. I am gonna try it. Atleast it looks better than all those costly canister filters in the market. Best part is that you have listed all the required items in description. Thanks buddy
@mohdsalmankhan639
2 жыл бұрын
Thanks a ton! You are simple creative no one can beat your creativity. May God Bless you more with the creativity.
@madebykm
2 жыл бұрын
Thank you 🙏
@florendilla9365
2 жыл бұрын
Thanks again for this very useful video. The steps are very clear and easy to follow.
@madebykm
2 жыл бұрын
Thank you 😊
@michelrood2966
6 ай бұрын
Very nice. If you would have added fine filter sponge it would make the water much more clean.
@geoffreyvonmarkirada8823
11 ай бұрын
I'm a beginner looking for DIY filter. until i stumbled into this video. I might try this to build for my crayfish
@rahulbeniwal2725
Жыл бұрын
Bro you are mind blowing you save my money 2500 this filter is so easy and perfect my 2 feet aquarium really bro I salute you I like your attitude thank you you share this knowledge
@madebykm
Жыл бұрын
Thank you 😊
@adkgaladkgal1799
Жыл бұрын
I think this is great. I always use a diy filter. Power head in the tank up to a filter box. Works great. Thank you great way to do it.
@madebykm
Жыл бұрын
Glad to help
@MayureshMungekar
2 жыл бұрын
Was waiting for your video and as usual you didn't disappoint. Excellent content
@madebykm
2 жыл бұрын
Thank you 😊
@Frenchdatfry
5 ай бұрын
just stumbled upon this video, glad you're doing well with ur subscriber count now
@LifeGoesOn...
Жыл бұрын
Saved it and will do it later. This is the best filter i found.
@jamalshaikh5236
23 күн бұрын
Awesome amazing superb work 👍
@drishratdar
Жыл бұрын
Excellent. Easy to make, use and maintain in comparison to those cumbersome filters available
@madebykm
Жыл бұрын
Yes, thanks
@catherineblair1221
2 жыл бұрын
wow! That is super nice! I am thinking now of ways to modify that so that the input can feed plants and the output can become a waterfall. But yeah awesome!
@madebykm
2 жыл бұрын
Thank you 😊
@31sgh
2 жыл бұрын
dada chomotkar hye6e...ekta diy aquarium making er video banio plz
@madebykm
2 жыл бұрын
Ha banabo, thank you.
@Sharad-ng3sj
Жыл бұрын
Very very very very nice❤😮, 👍 yahan mujhe achcha Laga thank you
@madebykm
Жыл бұрын
Thanks
@lego40404
Жыл бұрын
Nice video and great idea for the flex hose. I would spend the extra dollars and get a bulkhead fitting for the suction line, that’s a lot of water to want to rely on silicone
@madebykm
Жыл бұрын
Great tip!
@_The_Fishy_Guy
2 жыл бұрын
You deserve a million sub ❤️ vison innovative laglo...ekta banabo ami eta dekhe 😌
@madebykm
2 жыл бұрын
Thank you 😊
@_The_Fishy_Guy
2 жыл бұрын
@@madebykm ekta question chilo...oi diy co2 video te tumi agar agar powder add korechille...otake bangla te ki bole?? Dokane giye ki bolbo?
@madebykm
2 жыл бұрын
Otake Agar Agar e bole 🙂
@_The_Fishy_Guy
2 жыл бұрын
@@madebykm ok dada 😌
@___d_zy___
2 жыл бұрын
Superb idea. Very useful for me. Love it from SRI LANKA 🇱🇰 😍 🙌
@madebykm
2 жыл бұрын
Thank you 😊
@yashtapase3821
Жыл бұрын
Thanks I bought all the stuff all I need to do is start this process 😅 Thanks sir 🙏 ☺️
@madebykm
Жыл бұрын
👍
@ashwingogawale5560
2 жыл бұрын
Amazing work bro as usual, you rocked it.
@madebykm
2 жыл бұрын
Thank you 😊
@c0nn3ct3d4
Жыл бұрын
Very nice build but those cheap siphon tubes are prone to leak over time!
@MrNovylee
Жыл бұрын
awesome video thanks, just 1 question. we have a lot of power failures in South Africa 😩. will the container keep filling up when the power goes off or not????
@madebykm
Жыл бұрын
It will depend on the quality of the container. If a very good-quality airtight / leakproof container is used, water will not leak under any circumstances. So before making the filter, you need to check that the container is completely airtight / leakproof or not, just like I showed in the video. Thank you 😊
@MrNovylee
Жыл бұрын
Thank you
@madebykm
Жыл бұрын
👍
@cristianalejandroo1822
Жыл бұрын
Increíble trabajo 👏🏻😁 Lo copiaré 😁
@madebykm
Жыл бұрын
Thanks 😊
@farhinayesmin4581
6 ай бұрын
It's amazing I want one
@Petsworld655
11 ай бұрын
Very good idea
@madebykm
11 ай бұрын
Thanks for liking
@SandraMartinez-my7kn
Жыл бұрын
Hola excelente video. Quisiera saber para qué le hiciste huecos al tubo de entrada? Gracias
@madebykm
Жыл бұрын
So that water can enter the inlet tube not only from the bottom but also through the top of the pipe. Thank you.
@josue471
2 жыл бұрын
Excelente trabajo muchas felicidades 🎈🎉🍾🎊
@madebykm
2 жыл бұрын
Thank you 😊
@glenndabreo3581
Жыл бұрын
Very nice. Thank you for sharing.
@madebykm
Жыл бұрын
Thank you! Cheers!
@ankitmathur1947
2 жыл бұрын
Master stroke ….Using gravel cleaning syphon for suction 👏👏
@madebykm
2 жыл бұрын
😊
@subhasishpurkait6579
Жыл бұрын
Its the inspiration to make DIY
@madebykm
Жыл бұрын
Thank you
@Jay-jv2eq
2 жыл бұрын
Great work
@madebykm
2 жыл бұрын
Thank you.
@dictionaryguy5521
3 ай бұрын
May i aak why you chose to place the Siphon on the bottom and the pump on the top as oposied to thr pump on the bottom?
@DotaLoverification
Жыл бұрын
Man u r awesome in my life I see the best diy filter video
@madebykm
Жыл бұрын
Thanks
@harish4378
Жыл бұрын
Thanks for making this perfect video 👏🏻👏🏻 I will surely try this one... Subscribed 👍🏻
@madebykm
Жыл бұрын
You’re welcome
@bjornjoseph
Жыл бұрын
Ok this was cool... just needs more filter media. Carbon, polishing pad, etc
@madebykm
Жыл бұрын
Yes, you can add different types of filter media to it as per your requirement.
@ashwinaravindantony
2 жыл бұрын
I have made something like this for a pond. The blue pump of the hose though Is on the top. It's quite a big filter so it makes it restart it, if the water is drained. Since the water pump is out side it gives more room for filter media with a pvc going right to the bottom with an L joint and the out flow is from the top of the filter to create a water fall. It's a random DIY though but works well and serves the purpose. 🤣
@madebykm
2 жыл бұрын
That’s great 😃
@pawankhedkar
Жыл бұрын
Great work, it need creativity to do such things, well done
@madebykm
Жыл бұрын
Thank you very much
@johnjwedrall4290
2 жыл бұрын
Found your channel today and subscribed. Great idea's 👍 gonna try a few. Thanks ❗️ 😊
@madebykm
2 жыл бұрын
Thank you
@6rahulrajendran
2 жыл бұрын
What a pity. This guy is the best in trying out new things and very few subs
@madebykm
2 жыл бұрын
Even if one tries hard but does not get the support of luck, he will not get the expected result. And I'm one of those unlucky ones 😀
@Mod_monkey
Жыл бұрын
@@madebykm i dont about you but i am. lucky enough that i encountered this channel it is going to help me in my fist tank... I am new to this hobby 🥰😍
@cdropbox
Жыл бұрын
i subbed!
@manu-120
Жыл бұрын
how will it work once after there is a power cut, as the water input is not initiated by pump and is done by syphoning. will the water stop flowing? or what will happen?
@amittp3820
2 жыл бұрын
Amazing work bro
@madebykm
2 жыл бұрын
Thank you 😊
@josin07
2 жыл бұрын
Great stuff! Qq, Can this be used to any tank. Or is there a certain limit. Especially with the container you used..
@madebykm
2 жыл бұрын
This filter is suitable for 15 to 20 gallon tanks and can be used in tanks up to 30 gallons. Thanks.
@amanchoudhary9585
2 жыл бұрын
Had made this similar kind of diy canister but I'd used cpvc pipes and a big sponge on the inlet pipe + partion made of drilled plastic sheet between the media.
@madebykm
2 жыл бұрын
That’s nice 🙂
@amanchoudhary9585
2 жыл бұрын
@@madebykm I must say your videos are great to watch.. Nice work👍
@madebykm
2 жыл бұрын
Thank you 🙏
@amitavaduttabanik
2 жыл бұрын
Can you help me by telling what size of CPVC pipe you had used ?
@amanchoudhary9585
2 жыл бұрын
@@amitavaduttabanik half inch
@tanveerahmedmb
Жыл бұрын
This is my favorite DIY video. I would prefer an Eheim Canister but why shouldn't I make it myself, when I have excellent teachers like you. Please give me the links of the things from where you purchased. Even the glue and the hose. I'm not finding those. Also can we place the pump outside the filter. Please make a diy like that.
@madebykm
Жыл бұрын
I have given the links in the description, you can check them out. Also, you can get the glue (fevikwik) at any grocery store. You can get all these items at very cheap prices if you buy them offline (supermarkets and aquarium stores). Moreover, I will be making more different types of canisters in the coming days, so stay tuned. Thank you.
@luisfernando262
Жыл бұрын
Amazing stuff. Keep it up
@madebykm
Жыл бұрын
Thanks 😊
@tijamir4998
2 жыл бұрын
Will it overflow if the current goes out ? Also do we need to pump everytime we start ?
@madebykm
2 жыл бұрын
No, as the container is airtight / leakproof, it will not overflow when it is off. Also, there is no need to pump it every time you start the filter. It needs to be pumped when the container is empty / the container has to be filled with water.
@bhushanramani4475
2 жыл бұрын
Bro pls start talking in your videos again, it's nice to listen you explain things😄👍
@madebykm
2 жыл бұрын
All right, I'll do 😀
@droidbhai2145
2 жыл бұрын
Very good 👍 I don't know much abt aquarium But यूक्रीटेड a nice
@madebykm
2 жыл бұрын
Thank you 😊
@GauravBirla
2 жыл бұрын
AND ITS GOT A PRIMING FUNCTION !!! WOOOOOOOOOOOOWWWW !!!!!
@madebykm
2 жыл бұрын
🙂
@LushAqua
2 жыл бұрын
Nice build KM👌👌🤝🤝
@madebykm
2 жыл бұрын
Thank you 😊
@ethanfrancis2415
Жыл бұрын
Very unique idea for an canister filter 👍👍
@madebykm
Жыл бұрын
Thank you
@josemac7891
2 жыл бұрын
Saludos desde Honduras en Centroamérica; lo único que se le debe agregar arriba de las esponjas es perlón nada más; del diseño y construcción es un canister fuera de serie.
@madebykm
2 жыл бұрын
Gracias
@vincentkeys9476
2 ай бұрын
which silicone did you use
@pratheekrr243
10 ай бұрын
Can i use 30w pump for same method ? Does inlet flow and outlet flow will be maintained equally or not??
@epicshoutssamuraireview3913
4 ай бұрын
I have 20 lit tank. i will using method in video but i have 400L/hr powerhead. Will it usefull. I am having betta fish.so i need slow flow.
@kiranghosh2667
2 жыл бұрын
Superb dada. Where can I get straight connector and elbow connector?
@madebykm
2 жыл бұрын
Thank you. Please see the video description section for the product links.
@mahmoodmahmood118
2 жыл бұрын
Nice bro👍
@madebykm
2 жыл бұрын
Thank you.
@sanjeevtripathi1970
2 жыл бұрын
Wonderful craftsmanship KM
@madebykm
2 жыл бұрын
Thank you 😊
@susnatasen
7 ай бұрын
Which W power head should I use for my 1ft cube planted canister filter
@charlesdanedivinagracia6485
2 жыл бұрын
Wowww so great keep up the great work
@madebykm
2 жыл бұрын
Thank you 😊
@Mohd.SHAHNIB
2 жыл бұрын
Excellent work
@madebykm
2 жыл бұрын
Thank you
@Eswarr
10 ай бұрын
Hello kaushik , I have seen both of your videos on diy canister filter . Which one works the best ? The new or the old methodb
@madebykm
10 ай бұрын
Both will work equally well
@Eswarr
10 ай бұрын
@@madebykm I'm following your method and i have placed the motor at top ( outlet at cap and inlet at the bottom) but the only concern is the tank is at a height of 3 feet stand , will the water reach there ( I'm using 18 w motor) also what's the side of PVC pipes that should be used
@ABC-hb2li
2 жыл бұрын
Thank you. Subscribed.
@madebykm
2 жыл бұрын
Thank you too!
@SebastianSailo
11 ай бұрын
love you love you hehe thank you
@madebykm
11 ай бұрын
Happy to help!
@atharvbandgar25
Жыл бұрын
Brother maine same filter bana diya hain achaa work krta hai but mujhe overflow ka problem aa rha hain jab band krta hun filter to overflow hojata hai thoda paani Aur 1 doubt tha kya main is fliter ko 4 feet aquarium main use kr skta hun??
@madebykm
Жыл бұрын
Yahaan 100% airtight / leakproof container use karna chahiye, nehi to ye problem hoga. Isliye maine video ki shuruyat me dikhaya tha ki kaise test kiya jaye ki container leakproof hai ya nehi. Aur ye filter maximum 2 feet tank ke liye ideal hai, 4 feet tank ke liye aise 2 filter use karna parega.
@atharvbandgar25
Жыл бұрын
@@madebykm Aur agar isi filter main jyada power wala powerhead laga diya toh kaisa rahega kya wo bhi chal sakta hain?
@madebykm
Жыл бұрын
Haan, laga sakte hain. Phir bhi, 4 ft tank ke liye ye bohut chota hai.
@subirchowdhury4129
2 жыл бұрын
Good work.
@madebykm
2 жыл бұрын
Thanks
@basill37
Жыл бұрын
Add ceramic rings , at top instead of bio balls.. more effective
@madebykm
Жыл бұрын
Sure 👍
@Siva-tn8gf
Жыл бұрын
What happens if power off...? It will over flow? Or stop suction?
@madebykm
Жыл бұрын
You need to use a container that is 100% airtight or leakproof, then water will not overflow from the container under any circumstances. I have given the link of the container I used in the description, you can check that out.
@oreothechocolaty
Жыл бұрын
Awesome
@trullasf
2 жыл бұрын
Looks great, new to this hobby, Just wondering how much will this same setup cost if we buy from a brand(Readymade)?
@madebykm
2 жыл бұрын
Canister filters available in the market are very expensive. For example, this is the smallest model with a flow rate of 400 Liter / Hour - amzn.to/3uS9NfX And the canister filter I made has a flow rate of 1000L/H Thank you.
@trullasf
2 жыл бұрын
@@madebykm wow, yes ,i see the difference. really impressive effort by you. Appreciate it. 👍
@madebykm
2 жыл бұрын
Thank you 👍
@somegirl8124
2 жыл бұрын
Oh Nooo....... Just baught a costly Canister filter yesterday 🤦
@madebykm
2 жыл бұрын
That’s okay, if you have any other aquarium, make a filter like this for it :-)
@somegirl8124
2 жыл бұрын
@@madebykm Thank you for the video.... I will for sure! 🙏👍
@madebykm
2 жыл бұрын
👍
@Osme79
2 жыл бұрын
Pretty cool good job 👏
@madebykm
2 жыл бұрын
Thank you
@aifoses
Жыл бұрын
I have my thoughts to do this to 3 aquatiums of mine (60l,50l and 149l), do you think this is enogh for all of my three aquatiums or do i need more than 1000l(flow rate) powerhead or less?
@madebykm
Жыл бұрын
For the 50L and 60L tanks, you can go with powerheads that have flow rates of 400-500 l/H, and for your 149L tank, go with a 1000 l/H powerhead.
@HasibZaman-ie1qv
Жыл бұрын
Wow
@madebykm
Жыл бұрын
😊
@manjitsaini3612
2 жыл бұрын
It's Nice Dear, kindly clear my one issue how to clean fish poo from aqurium
@madebykm
2 жыл бұрын
Use aquarium gravel cleaning syphon - amzn.to/3uFiBpB Thanks.
@manjitsaini3612
2 жыл бұрын
But we used the syphon to make the canister filter now tell me is it possible that we clean the wastage with the same project
@madebykm
2 жыл бұрын
Canister filters / power filters cannot clean waste from the bottom of the tank. But if any waste gets near the inlet pipe of the canister filter, the filter will suck it up.
@bijoykundu11
2 жыл бұрын
Good one 👍🏻
@madebykm
2 жыл бұрын
Thanks
@Rakeshvarma2096-o6f
Жыл бұрын
Amazing video 👌👍
@madebykm
Жыл бұрын
Thank you 👍
@aquafishholicinsydney7478
2 жыл бұрын
It's amazing I like it bro
@madebykm
2 жыл бұрын
Thank you 😊
@fitriahnaf3815
Жыл бұрын
Great idea and work!!! ❤
@madebykm
Жыл бұрын
Thanks
@MBAPE02
Жыл бұрын
Sir can you make a DIY top filter that's easy to make
@madebykm
Жыл бұрын
Yes I will make
@shreyashnikam6043
Жыл бұрын
Thanks for giving an idea😂❤❤❤
@madebykm
Жыл бұрын
👍
@atharvbandgar25
Жыл бұрын
Brother main bhi same banane wala hun filter kya iske results achee hain long term main?
@madebykm
Жыл бұрын
Haan, main abhi bhi ye filter use kar raha hoon, aur ye bohut achcha kaam kar raha hai.
@gmrboyff1821
Жыл бұрын
Plz make a video on diy bowl light.
@madebykm
Жыл бұрын
Ok, I'll keep that in mind and make it 👍
@madhatterjones4781
Жыл бұрын
Such an awesome video wow!!!!! This is awesome
@madebykm
Жыл бұрын
Glad you liked it!!
@madhatterjones4781
Жыл бұрын
@@madebykm and how's that canister filter performing over time?
@madebykm
Жыл бұрын
I'm still using it, and it's working great.
@madhatterjones4781
Жыл бұрын
@MadeByKM that's great awesome haha I was thinking to make one for a nano bookshelf tank
@madebykm
Жыл бұрын
Sure 👍
@cdropbox
Жыл бұрын
nice
@newbieplayer5955
Жыл бұрын
Dada one doubt : I have built my 3x1.5x1.5 planted aqm, with 2x1x1 sump below it , now should I turn on an air pump also ? and if yes can I do it in the pump return chamber or I have to do it in the main tank ?, ba na dileo cholbe ?
@madebykm
Жыл бұрын
Air pump er dorkar nei, emni thik ache.
@FranciscoAlvesJV
Жыл бұрын
DIY King🎉
@madebykm
Жыл бұрын
Thanks 😊
@directconnectdc8917
2 жыл бұрын
nice! this video made me subscribe to ur channel
@madebykm
2 жыл бұрын
Thank you
@save_earth123
Жыл бұрын
👍👍👍👍 can u tell me from where u got this parts ...........
@madebykm
Жыл бұрын
Please see the description box for details.
@RevealYourEditz23
8 ай бұрын
Should i use this in 2ft. Tank?
@madebykm
8 ай бұрын
Yes, you can
@gallardo20000
2 жыл бұрын
Is there anyway to make the tubes longer so you can hide the canister below the aquarium? custom piping with a valve maybe? similar to the eheim filter series
@madebykm
2 жыл бұрын
Yes, you can use this type of flexible conduit tubing (Inner Diameter 16mm) - amzn.to/32qklJi OR 16mm I.D. garden hose - amzn.to/3qyPvG5
@aquasoviksworld
2 жыл бұрын
fata fati...
@madebykm
2 жыл бұрын
Thank you 😊
@aquasoviksworld
Жыл бұрын
@@madebykm Online me container ka price 750/- dikha raha hai, tum kaha se liye itne sasta me ? tumara ek comment dekha jidhar mentioned kiye ho ki total 600rs spent hua !
@madebykm
Жыл бұрын
Ami Amazon thekei same container kinechilam 9th December 2021, Rs. 497 e. Amar kache Amazon er invoice ache. Online e kono jinisher daam fixed thake na, frequently baare ba kome. Eirokom container online e na kine market theke kinle hoyto aro shostay paoa jabe. Tai ami kono wrong information dei ni ba konodin debo na.
@aquasoviksworld
Жыл бұрын
@@madebykm nah nah wrong information diye6o seta bolini. Ami bhablm 2mi offline theke kine6o buy amader help er jonno online er link dia6o. Ami akta banabo bhab6i but onek ki6u kinte hbe drill theke suru kore sob.
@Sriram9ma
2 жыл бұрын
Hi bro , I am trying to make a canister using a 6 inch pvc pipe . Not able to find gasket to close it any idea which one we can use as o ring or gasket
@madebykm
2 жыл бұрын
This is a big problem, we don't get any essential items from our local stores when needed. However, your can use silicone glue to seal the joints.
@harissohail4536
2 жыл бұрын
I have a 17 gallon tank with 9 neon tetras. Everything is fine except the powerhead filter. It is too strong for them as they come under immense stress when I turn it on. Can I solve this problem by turning my powerhead filter into a canister filter as shown here? or do I need a sponge filter?
@madebykm
2 жыл бұрын
Yes, you can do that.
@rahulbeniwal2725
Жыл бұрын
🙏🙏 thanks bro this knowledge sharing👍 this 2 benifit 👉save my money canister filter 2500👈👍👍👍 And 👉 this filter is perfect my 2 feet tank ♥️♥️♥️♥️
@madebykm
Жыл бұрын
Great 👍
@akhilprasad4090
Жыл бұрын
Hi , is the filter pump is under the water or if not does it get the motor heating issue ??
@madebykm
Жыл бұрын
Yes, the pump is under the water.
@sujalmaharjan911
2 жыл бұрын
Can you pls make a bacteria starter for newly established tanks
Пікірлер: 422