Just ordered a full set for my Jim Bowie prime from a video I was watching from the Mad Scientist BBQ. Can’t wait to get them installed.
@TdubyaGH
2 жыл бұрын
Just installed the grate system into my GMG Jim Bowie. I am not sure that it could be an easier install. 4 bolts, hand tight and I was good to go after seasoning. Unless I received a different model, the rotisserie mount was different than what is shown in this video. My main take-away is that this expands the capability of my GMG and was really easy to install. Heavy duty- but as mentioned in the video - be careful of the sharp edges on the grate. I wore leather gloves during the install, so I was good to go. After showing my buddy this grate system, he also plans to order one for his GMG. Great design!
@Ted_P
2 жыл бұрын
I recently installed these on my older GMG DB. I wasn’t sure if it would fit based on the web site description. I sent an email to TheBBQHQ and got a quick reply. They asked for certain dimensions of my grill. Once I sent them, they confirmed that this system would work. They shipped them out quickly and as Tony Woolf mentions in another comment, it could not be easier. I have them all seasoned up and I have a couple of cooks on them so far. They are awesome. This effectively doubles the cooking area. They grate system does at a decent amount of weight to the grill. That’s not an issue for me, however.
@TheBBQHQ
2 жыл бұрын
Glad you are liking them!
@johnnyrodriguez5565
2 жыл бұрын
Have had these grates for a few months now on my JB Prime Plus and really like them! The added thermal mass helps even out the temps across the grill surface and I can fit two full packer briskets on the top grate leaving me room for a water pan on the bottom grate. The only improvement they could make would be to not block the thermometer probe holes - maybe provide some sort of pass thru? But you can just run the wires under the lid without any real issue so it isn't much of an issue to be fair.
@davidvaughters1739
2 жыл бұрын
Love the slide out grate especially for the middle rack. Have a Rider DLX Gen 2 and would love to see a mod like this!
@jarrad4397
2 жыл бұрын
I think I have a "pretty strong pull out game" already.
@TheBBQHQ
2 жыл бұрын
😉
@RobertHawk
2 жыл бұрын
You may wish to edit title links for your shelves' links. DB=Ledge and JB=Peak. You probably want people to get to the right place the firt time
@TheBBQHQ
2 жыл бұрын
Are you referring to the url on our website?
@AndrewBazz
2 жыл бұрын
Please make one for the Grilla Grill Silverbac!
@T0X1C89
2 жыл бұрын
Any plans to make these for the Camp Chef Woodwind grills?
@Harlizzlee
2 жыл бұрын
Do you have a video installing a downdraft with your grates?
@geedubbya4432
2 жыл бұрын
So if you have the GMG Ledge do you mount the rotisserie kit to your rack or the Ledge?
@richardtirao6239
2 жыл бұрын
can you pull the drip tray out with the grate bracket installed?
@TheBBQHQ
2 жыл бұрын
Yes. Our first versions of this generation didn’t, but we have since resolved the issue.
@halaldigest
2 жыл бұрын
Can you give the dimensions. So what is the height between the 2 grates. And what is the distance between top rack and top of the grill.
@TheBBQHQ
2 жыл бұрын
There is about 5.5" inches clearance between the top and bottom grates and about the same from the top of the grill and the top grate.
@halaldigest
2 жыл бұрын
@@TheBBQHQ thank you!!!
@EarthSense
2 жыл бұрын
Very cool!
@TheBBQHQ
2 жыл бұрын
Thank you!
@stevejensen6210
2 жыл бұрын
Grate idea.
@TheBBQHQ
2 жыл бұрын
You’re punny!
@bradykice8759
2 жыл бұрын
What is the total bookable space now with this rack system like square inches wise
@carlostello1863
2 жыл бұрын
While I don't see any in stock right now, will y'all be able to ship these or are they only available locally at the store?
@M4ttNet
2 жыл бұрын
From watching vids it seems you really like the Weber Smokefire and the GMG pellet grills a lot? I'm considering a few but really looking at either of those two (the GMG would be with these amazing grates), what are your thoughts between the two? Flavor, what's easier to clean/maintain, durability, quality etc? Only looking for smoking no need for grilling.
@ntoxic8edx
2 жыл бұрын
Definately biased.
@markloguidice8327
Жыл бұрын
Do you make them for pitboss smokers
@TheBBQHQ
Жыл бұрын
Not quite yet. We are working through a few other models right now but pit boss is on the list.
@Harlizzlee
2 жыл бұрын
so you can't use the gmg rotisserie with this? can you leave the brackets in place for the pizza oven?
@TheBBQHQ
2 жыл бұрын
You can use the rotisserie, in fact it has its own bracket so you don’t need the stock one. And yes, the brackets stay in place for the pizza oven
@solomoe2
2 жыл бұрын
Can you please make this for the chargriller 980
@TheBBQHQ
2 жыл бұрын
We have it on our to-do list!
@solomoe2
2 жыл бұрын
What are the grate dimensions
@orangepowerguy
2 жыл бұрын
What are the dimensions of the bottom grate?
@jeffturner7817
2 жыл бұрын
Have you tried the new Royal Oak charcoal pellets yet? I’m hearing good results so far.
@TheBBQHQ
2 жыл бұрын
I have not. On the list though...I'm hoping they show up in my area soon.
@baldylocc64
2 жыл бұрын
Is there a difference in functionality between choice and prime?
@TheBBQHQ
2 жыл бұрын
Prime are 12 volt grills and choice are 120 volt. Prime has a few more features than choice, but at the end of the day they both cool great food.
@dayolddoughnuts4031
2 жыл бұрын
I ordered these....FYI....don’t waste you time with Traegers or Pit Boss units in making these....they make too many different sizes and make too many changes. GMG is consistent.
@DJK9RAA
2 жыл бұрын
Does these new ones have the grate stops on them like the old ones?
@TheBBQHQ
2 жыл бұрын
They do not. We couldn’t figure out a clean way to make it work for both levels.
@mikeporter2059
2 жыл бұрын
Will this work with the Don G down draft ? On a DB. Thanks in advance
@TheBBQHQ
2 жыл бұрын
We have tested it with a Don G downdraft and it does fit.
@geedubbya4432
2 жыл бұрын
Why does the grate pattern flip on the 2nd tier?
@ntoxic8edx
2 жыл бұрын
Because minumum wage or diy harbor freight welder fabricators dont think 😂😂😂😂😂.
@ericdowney3716
2 жыл бұрын
Where do I get the grate system for the Jim Bowie
@jimpierce1482
Жыл бұрын
From BBQHQ
@scottpettie
2 жыл бұрын
When will these be back in stock?
@TheBBQHQ
2 жыл бұрын
We should be shipping more again within a week. However, The back order list is growing.
@billhepburn3001
2 жыл бұрын
So how can I order
@TheBBQHQ
2 жыл бұрын
TheBBQHQ.com
@robdoesithimself2387
2 жыл бұрын
do you have this for traegers?
@TheBBQHQ
2 жыл бұрын
Working on the patterns. What model do you have?
@robdoesithimself2387
2 жыл бұрын
@@TheBBQHQ pro 780
@keithwickham1629
2 жыл бұрын
Will you have something like this for Pit Boss 1150?
@TheBBQHQ
2 жыл бұрын
It’s on our list. I don’t have a time frame but we plan to make this for Pit Boss products.
@keithwickham1629
2 жыл бұрын
Awesome, I'll be on the lookout for it.
@stevenstovall
2 жыл бұрын
My wife bought me a Pit Boss 850 for Father’s Day. Less than a week and I’m already finding I want a set of these. Email waiting list??
@JFKeNn3dy
2 жыл бұрын
I want to upvote, but can't bring myself to break the 69.
Пікірлер: 60