I’m a “historical figure painter “ and I’ve learned so much from you. If this is your creative outlet, then, and I’m not kidding here, you’re a national treasure.
@scomae5445
2 жыл бұрын
I'd say international because I'm not from the USA and really love vince's video :)
@ArchBunBun
2 жыл бұрын
No kidding! God I wish he would just go get a patreon so that I could start giving back a little. This is the best resource out there by far.
@VinceVenturella
2 жыл бұрын
Well thank you, yes, this is my creative outlet and hobby and I am always glad to help people. That means a great deal to me and happy to help. :)
@stanlee2200
2 жыл бұрын
Historical painter...does that mean youre really old? Lol im kidding
@stefanblackadder5236
2 жыл бұрын
@@stanlee2200 actually yes…haha haha
@superlurkeable
2 жыл бұрын
I found a very particular use of brush-on primer to be for broken pieces. Sometimes part of a mini will chip slightly, or I'll have to re-glue a piece which might require me to sand the bit before glueing. Brush on is nice to have to re-prime a specific area after you glued it and then re paint over it!
@tamsinp7711
2 жыл бұрын
Another use for colour primers is when you want to desaturate the paint colours going on top. As an example, for my WW2 Australians I used Vallejo red-brown primer which helped to tone down the greens of their uniform and provided a good base for the flesh.
@VinceVenturella
2 жыл бұрын
100%, I actually use this pretty frequently in videos, I can't believe I missed it. :)
@MaskedRiderChris
2 жыл бұрын
I'm starting to use my colored Vallejo primers more often to this end as well, as it happens!
@ScytheNoire
2 жыл бұрын
One useful thing to do after a zenithal highlight is to take a picture of it. This lets you call back to it to make sure you are getting your shades and highlights correct. Just another reference point tool to use. Can also then use an graphic edit program to do test paint schemes. I think Lyla Mev was the first place I heard about doing this.
@drizzitdude
2 жыл бұрын
My favorite primer is Vallejo Surface Primer black. Even when applied with a brush, it is almost like magic how well it comes out and it actually saves you on paint! I have a large brush I generally use for priming when I am working and can't use an airbrush. With Vallejo Surface Primer you can put one drop of black on a wet pallet and is that will be enough to get through an entire miniature, what is really crazy about it is how thin it comes out, it never mucks up details or crevices even when I feel like I got too much on a brush. It feels like it is somehow noob-proof primer. I cannot recommend it enough.
@VinceVenturella
2 жыл бұрын
I am a big fan for sure.
@endlessfight
2 жыл бұрын
You always have such a concise delivery, while remaining personable. I truly appreciate your ability to suggest what we may already know, without condescension. It is with this approach that we are able to proceed and grow in a safe space with a safe mentor. I can’t thank you enough for your contribution to our hobby.
@VinceVenturella
2 жыл бұрын
Thank you, that means a great deal and I am always happy to help.
@grumpymeggo
2 жыл бұрын
I would say one advantage of "miniature rattle can primers" e.g. Army Painter is that you can get specific colors that match with the colors of their miniature paint range.
@kobold_ts
2 жыл бұрын
Not sure how about AP but sprays from GW don't match their pot paints, like, at all. You get two products of the same name (e.g. Mechanicus Standard Grey), one in a can, one in a pot - and the shades will be completely different.
@grumpymeggo
2 жыл бұрын
@@kobold_ts The AP sprays I had in the past did match! 👍🏻
@DMNKLR_official
2 жыл бұрын
@@kobold_ts yeah the TAP ones are guaranteed to match. Oddly, the bigger issue is that their paints in the bottles don't always match, so when buying a replacement bottle, one need be picky and see it in person or spin the roulette wheel and hope for the best.
@VinceVenturella
2 жыл бұрын
I get that and I can see where that is valuable I suppose. For myself, any red that looks close is basically going to be fine.
@MrMockigton
2 жыл бұрын
@@VinceVenturella agreed. even if i prime in the "correct" colour, i never just leave that primer layer as it is.
@Butter2731
2 жыл бұрын
Your channel is an absolute treasure trove for new painters like myself! Thank you so much for all the work you put into these videos!
@VinceVenturella
2 жыл бұрын
You're very welcome!
@philipspringall7068
2 жыл бұрын
Love seeing ya face Vince! Amazing and in depth as always!
@VinceVenturella
2 жыл бұрын
Glad you enjoy it!
@kevinhayes517
2 жыл бұрын
A very useful “primer” on primers…..really appreciate the time you spend and the clarity you bring to each subject. And thanks for talking about the curing times on the primers: this will save me a lot of time as I usually wait at least 1-2 days to make sure it’s fully dry and set. Thanks again!
@VinceVenturella
2 жыл бұрын
Always happy to help. :)
@motorboot2822
2 жыл бұрын
Damnit, Vince, you've got me. 1,5 years into the hobby and I've already spent enough on rattlecans to afford me an airbrush starter set. Got 6k points of Beastmen ready to be primed, so it's either 40 bucks on more rattlecans, or bite the bullet on an airbrush.
@AllegedDev
6 ай бұрын
I've just recently started painting models and miniatures. My results were NOT good. A bunch of people recommended your videos. You have SO much good info, and these videos have been SO helpful. Thanks!
@VinceVenturella
6 ай бұрын
Glad I could help!
@el_passo_painting2796
2 жыл бұрын
I have always used hardware store cans to zenithal prime from black and grey. Very cheep and effective,like Vince said. I painted 6 armies last year using this method and no complaints at all. Ive recently decided to move to airbrush primer to experiment more with single mini painting and busts. Should be fun! Great advice for anyone especially beginner painters.👍
@VinceVenturella
2 жыл бұрын
Yep, 100%
@ThePingouin2ter
2 жыл бұрын
Great video! Just wanted to add that Vallejo Desert Tan for airbrush is a great primer for contrast paint, and gives the tonal warmth that is often sought.
@VinceVenturella
2 жыл бұрын
Great tip!
@OpticFusion
2 жыл бұрын
Finally received my Compressor and Airbrush yesterday. Undercoated my first model using zenithal highlighting. I will never go back to rattle cans except for terrain. An airbrush is the best thing I have ever used. It was raining last night and I could undercoat without any problems. Thank you Vince for all the tutorials on this. Some more beginner tutorials for airbrushing techniques would be great if you have the time.
@VinceVenturella
2 жыл бұрын
It's amazing.
@PhD777
Жыл бұрын
Outstanding video, Vince! A few things to add... Re: Can Primers - Since the early-mid 1970's I have used Krylon Flat White & Ultra Flat Black spray-paint - not primer- as the spray-can primer tends toward obscuring detail compared to the spray-paint (thousands of miniatures with no issue). Sketch/zenithal: This can be achieved by brushing (wet or dry) white/light color over the darker undercoat if the can or airbrush is not an option. Brush-on primer: acrylic professional or artist quality Gesso is an excellent material to use that, when dry, does not obscure detail, as it "shrinks" to the surface to provide excellent tooth. This can be painted over or left exposed, too. (Use an old brush - taklon or nylon to apply the Gesso). As an aside: I also do large armies (Thirty Years War, English Civil War, Napoleonic) in 1/32nd scale (54mm) that contain soft plastic miniatures. Due to their flexibility and paint adhesion issues, I use Krylon Fusion spray-paint and Gesso as airbrushed primers do not have the adhesion and durability necessary to survive the he drops or bends. :)
@SvenEnterlein
2 жыл бұрын
12:28 one of the most important tricks! I am using the stynylrez primers and they definitely need thinning but even when thinned quite a bit, I always had issues with clogging. Adding a bit of cleaner or thinner before loading the primer works wonders! Thank you so much for pointing out all the differences. While most seem obvious, it never hurts getting them spelled out.
@VinceVenturella
2 жыл бұрын
Always happy to help. :)
@markfreiberg9906
2 ай бұрын
I myself just yesterday tried Stynylez®primer in my airbrush for the first time, and I had clogs essentially from my first touch of the trigger! I was so frustrated I almost threw the whole bottle away! However, I guessed that some thinner might help, and it did -- a bit. I still had far more clogging than with any other paint or primer, but the results on the item being sprayed (a model aircraft) were beautiful once I could get the Stynylrez primer to spray onto the item. The jury is still out for me, but I will continue to try pre-loading thinner and perhaps other additives (retarder?).
@ElPrezAU
2 жыл бұрын
Great video as always. Commenting to say that if you ever get the opportunity, give Molotow All in One a go. I previously used Vallejo and Stynylrez but after Molotow I'm never going back. Ridiculously durable, super thin (sprays through my .3mm HP BH out of the bottle with no issues at all) and lays down smoother than any other primer I've used. Even though it's not, strictly speaking, sold as a primer (it's actually a marker formulation for graffiti artists) it remains an excellent adhesive surface for subsequent layers of paint. It's one of those products that leaves you thinking there is some form of witchcraft at play after you use it. :)
@VinceVenturella
2 жыл бұрын
Yep, it's really good stuff, but it's hard to find in the US. :)
@theenigmaticgamer
9 ай бұрын
Fascinating explanation. Thanks so much for sharing your skills and insight. I have been painting minis for over fifty years and I am still learning thanks to your videos. Very best wishes from the UK.
@todsmith6591
Жыл бұрын
'this was designed to cover your chair on your back deck' says it all. Controlling the amount of primer coming out is very important. Thank you kindly for this video.
@HeadHunterSix
2 жыл бұрын
From my own experience, it doesn't matter if your paint is "opaque" over a xenithal primer - the color of a primer can and does affect the tone of the colors placed over it, even if you can't "see through" at all. I learned that when painting Imperial Fists. Tried over pink, white, red-brown and neutral primers and even once I got an even coat, they still all looked different.
@VinceVenturella
2 жыл бұрын
Yes, this is espcially true with brighter colors. The more saturated the hue, the more it can be affected especially by dark primers.
@jamesgalbreath343
2 жыл бұрын
Very helpful video! As someone just beginning to play around the edges of this craft, I really needed a basic explanation of priming. Suggestion: it would be very helpful to have an explanation of "reading" the miniature before priming and painting. I know for those who are experts this comes instinctively, but watching you take a raw miniature and explain how you analyze that paint layering prior to doing any of the actual application of anything to the surface would be immensely helpful. Show how you "map" the project in your mind in order to choose primer and colors?
@jamminghaze
2 жыл бұрын
well planned is half done. XD
@VinceVenturella
2 жыл бұрын
I'll see what I can do. :)
@jamesgalbreath343
2 жыл бұрын
@@VinceVenturella Thanks, I'll look forward to it!
@user-si3ct9yu6g
2 күн бұрын
I have gotten a lot from this video. Thanks for all the things I must think about as I am getting started. I was not aware of the two colour priming and seeing it made the point. I am going to adopt that method immediately and see the effect in real life. I believe it will add a touch of life and interest to the clay figures I will be painting. I used a lot of rattle can primer when painting scale models but found that in the course of th year, I spent too much compared to the cost of air brushing the primer.
@richardmarriott-smith9517
5 ай бұрын
Great video. I found when I started zenithal priming, that the most useful aspect was being able to “read” the mini so much more easily. It really improved my painting.
@druidobianco9734
2 жыл бұрын
Best brush on primer i ever tried, even if it doesn’t say “primer” on it, is molotow one4all. It’s incredibly thin, dry fast and is tough (tougher than vallejo anyway)
@VinceVenturella
2 жыл бұрын
It's hard to get in the states, but I know many people are a great fan of it.
@rikowal
2 жыл бұрын
While I wouldn’t recommend them for new folks, but Im in love with lacquer based airbrush primer like Mr.Surfacer. Goes on like a dream, sands no problem, and if you use a leveling thinner with a nice clean coat.
@VinceVenturella
2 жыл бұрын
There is likely a whole video in that. :)
@EricHonaker
2 жыл бұрын
I started using Mr. Finishing Surfacer this year after starting scale modeling. It's just so good!
@spamstabber
2 жыл бұрын
Lacquers are a dream to use, just a shame they require a lot more ventilation than acrylics. Too impractical for a lot of small home setups 😔
@jimrobinz3580
2 ай бұрын
I challenge you on the rattle cans. I live in the deep south USA. And I've used the shaker can from 34 degrees to 100 degrees anywhere between 80% to 100% humidity. And have great success with them. Follow the 6 to 8 inch rule. With a sweeping motion across the figure.
@derricklung
Жыл бұрын
Thank you for these high yield tips! Helped me have my best priming session since I started the hobby 3 years ago!
@VinceVenturella
Жыл бұрын
Wonderful!
@christianschmidt1784
2 жыл бұрын
Molotow acrylics are great as primers. Especially their purple is a great start for a vibrant, easy yellow.
@brokefun7545
2 жыл бұрын
Their vibrant colors are amazing , usually on sale at my local hobby lobby
@VinceVenturella
2 жыл бұрын
I couldn't find any near me sadly.
@christianschmidt1784
2 жыл бұрын
@@VinceVenturella Jackson's Art and Blick Material do ship them. They are really worth a try.
@RossBobbie
2 жыл бұрын
I would also add gesso as a brush on primer, it acts a little different than just a paint.
@the_elder_medium
2 жыл бұрын
I have had good results with acrylic gesso as well. Even when thinned and run through my airbrush. They're ultra matte and perform well.
@DMNKLR_official
2 жыл бұрын
I use gesso for all of my Reaper Bones minis, and Stynylrez for everything else. The 2 work so perfectly for those applications. Just whatever you do, don't thin/reduce the gesso with water, for Bones anyway, cuz it'll have a heckuva hard time adhering. Made that mistake early on, and learned my lesson quick!
@VinceVenturella
2 жыл бұрын
It is another interesting option.
@TheTruthx58
2 жыл бұрын
I use Gesso because I don't want to go inside and outside all time as I live in an apartment and setting up/getting an airbrush is also incredibly annoying. The only issue I've bumped into is sometimes they have small little pinholes that you have to touch up.
@scurvyphansen
Жыл бұрын
As a relatively new painter of miniatures, this was extremely informative to me. I'll never reach high-level painting skill, but this kind of info will help me at least not get embarrassed by my figures on the game table. Thank you.
@ramonosuke
11 ай бұрын
Great knowledge! As a soon to be painter of minis, I was getting hung up on this topic so bad. I figured my money would be best saved towards actual paints, over the very expensive citadel/army painter primers starting out. I have heard good things on Krylon and Rustoleum's "CAMO" line, but might stick to the 2x flat black/white options
@VinceVenturella
11 ай бұрын
Glad this was helpful. There is no reason those spray primers can't be perfectly fine for priming your miniatures. I prefer an airbrush, but many painters use rattle cans like you're describing to great effect.
@MikeScarbro
2 жыл бұрын
This was a great video! I can tell you're really working on stepping up the production values on the last few vids, so keep up the great work. One note - the audio is a bit low, so boosting the levels a bit while editing would be great.
@VinceVenturella
2 жыл бұрын
Thanks! Will do!
@giraton1
2 жыл бұрын
The only thing I swear by when it comes to rattle cans is I can't trust white from non-miniature sprays, cause the pigments from hardware store cans can vary drastically and I find they clump far more often than the miniature cans. Grey or black is just 1 to 1 the same, white I'm a lot more picky on. Not that I really use rattle cans these days anyway.
@Mikey__R
2 жыл бұрын
I wouldn't go anywhere near a white rattle can. I'd use grey rattle can, then give it an all over coat of MIG Sand primer.
@VinceVenturella
2 жыл бұрын
I would generally recommend to stay away from all true white rattle cans in general. :)
@nonamo5700
Жыл бұрын
Nailed it on the benefit of brushing primer vs spray. Days where the paint starts to dry between the can and the mini and you're just hitting it with paint dust. Honestly, it's a niche - but it's what I'm trying to work around for half the year. That said, I'm pretty sure Mr. Hobby makes a line of primers that can be thinned - will be trying that soon
@Arne_K
2 жыл бұрын
Sharing your knowledge is deeply appriciated Vince! I've been painting for five years and i'm still grab some gems from the hobby cheating series. Your advice on using airbrush primes helped me out with the constant clogging.
@VinceVenturella
2 жыл бұрын
That's awesome to hear and always happy to help. :)
@evulutionofgaming
2 жыл бұрын
Hey Vince, Just wondering what the difference between airbrush flow improver and airbrush thinner. Is there different reason for using them.
@sarahdisco-dolly1150
2 жыл бұрын
I heard that thinner still cures and so can cause blocking of the needle, would flow improver help slow down the cure and help prevent blocking?
@VinceVenturella
2 жыл бұрын
Thinner is (generally) a mix of medium and a little flow improver. It's the binder medium that is thinning the paint without adding more solvent. FLow IMprover is just an addititive, it breaks up surface tension. Both are useful.
@evulutionofgaming
2 жыл бұрын
@@VinceVenturella Thanks for your quick response, and all the info.
@EArkham
2 жыл бұрын
Have you ever tried priming with Molotow? I tried them after watching a MarcoNJM vid, and have been hooked ever since. What are your thoughts?
@Thornbeard
2 жыл бұрын
Dude that is what I prime with as well. Same story with Marco as well, got some from Bombing Science in the 180ml refill bottles (Black, Grey, and White). I haven't looked back since. Goes on so smooth and really sticks.
@jordydavis6642
2 жыл бұрын
If someone isn't 100% Molotow it is because they haven't actually tried it yet plain and simple. Easily the best primer you can get hands down
@nubbetudde8922
2 жыл бұрын
I do not now if it is the best, but it works great in my experience. I am pondering to test one of their sticks on anything and covers anything black marker colors I am just a little concerned that it will kill my airbrush.
@VinceVenturella
2 жыл бұрын
They are hard to get in the states, but I know Marco swears by them,.
@jordydavis6642
2 жыл бұрын
@@VinceVenturella I get mine from Blick Art Supply! It's always in stock everytime I check. I would highly suggest at least getting the black and trying it for sure. It's a very smooth thin coat with no thinner needed, but some might be deterred by the satin finish.
@isisnmagic1812
2 жыл бұрын
I use the Army brush on primer for all the reasons you dont use it ie I don't have space for an airbrush or the funds , and I cant use the cans due to health issues . I've only been painting miniatures for nearly two years now and just started watching your channel , did see you on a ninjon video once. Now watched two and this one was so helpful I've subscribed, I find thin coat of the army brush on primer doesn't hide the details on my miniatures, and this video has made me realise I dont need to go all over with a black Matt after ther grey primer as I have been doing and also shown me there is more than black or grey primer, no other video I've watched has shown this or even gone into detail about primers, thank you so much. Now to watch more of your video's.
@VinceVenturella
2 жыл бұрын
Awesome, happy to have you along on the hobby journey and always happy to help!
@Lemonlord777
2 жыл бұрын
Great and useful video as always. If anyone is having big issues with priming and just cant figure out what they are doing wrong, id recommend trying a different primer. I couldnt for the life of me get vallejo surface primer to stick to anything. After drying and curing it just peeled off completely at the lightest touch of a finger. Tried multiple bottles and different colors and talked to various users of the product and never figured it out. I switched to stynelrez and problem solved instantly. 3 years later i still have no idea what was wrong. So if youre a newbie and something just seems like a product flat out doesnt work, you might not be crazy, it might just not be working for some reason even when everyone else says it works fine for them.
@VinceVenturella
2 жыл бұрын
Honestly, that is really good advice, especially since there is often intangible qualities to how well primers work (humidity and other factors).
@timburgis8339
2 жыл бұрын
I'd be interested to know if anyone uses a zenithal technique when painting a strong OSL effect. If you had a mini standing by a fire why not just zenithal prime from the position of the fire rather than from above?
@VinceVenturella
2 жыл бұрын
Yep, that's why I mention the other names. Really, you're just creating a lighting scheme.
@adfmac
2 жыл бұрын
The ‘zenithal’ part of a zenithal prime is the spraying from above, if you change the position of the light it is no longer zenithal, but some other directional tonal sketch.
@AtomicKitty31
2 жыл бұрын
Citadel primer has quite a lot of acetone in it (~60%), which in my experience makes it stick on miniature quite a lot better than airbrush primer. I can remove Vallejo airbrush primer with my nails for instance. Even after paint and varnish, I find that the paint rubs off much more on mini primed with Vallejo airbrush primer. I have not tried other rattlecans or other airbrush primers, so I can't comment on whether it's a brand thing or if it's an airbrush vs rattlecan thing. I find my prefered method is to prime with Citadel chaos black primer, then zenithal with white (or grey, or both) Vallejo airbrush primer.
@shoty2k
2 жыл бұрын
same here, i only use primers which are not water based because the rest doesn't stick to well. On the other hand vallejo black and green can easily be rubbed off even after months of driying time while the white one sticks as hard as a rock...I have no solution to the issue except to stick with primer with some acetone in it.
@jimsabo1189
2 жыл бұрын
I live in Southeast Asia. The price for spray cans is atrocious and finding a proper substitute is not so easy(not to mention dealing with humidity). I use Vallejo airbrush primer, but the white is definitely easy to remove. Black i find is actually quite durable if you let it cure for a day.
@SuperDuperHappyTime
2 жыл бұрын
I found a Army Painter Primer SDS. It has no Acetone listed, but has methanol. I think Vince’s point is there isn’t a difference between the cheap and army rattlecans. (I’ve seen a few differences though)
@Scott-hv1fy
2 жыл бұрын
I had the same thing happen to me. Do you do more than one coat? I only ever used one coat of Vallejo surface primer and it would come off on my nail no problem.
@VinceVenturella
2 жыл бұрын
That 60% number feels wrong based on what I'm seeing, but I will say I've coated thousands of miniatures in Vallejo primer, usually just two thin quick coats and don't have an issue (why is everyone scraping their fingernails across their miniatures???) ;)
@OrkKnuckles
2 жыл бұрын
Awesome. Love getting a straight, no frills, 10 best ways to make your painting look like you are a master video. Great stuff
@VinceVenturella
2 жыл бұрын
Happy to help. :)
@Berry-gs4xr
Жыл бұрын
Hey, I skipped that video for a very long time, because I'm into the hobby over a very long time and thought it contained nothing new for me anyway. Today this video reapeared in my playlist and I listened to it during some gaming as "background entertainment". And I got to say, I was right. It told me nothing new. But actually this is totaly fine to me. As said, I would call myself as expirienced, too. So to my mind this is realy a high quality description of primers and a helpfull video. And I totaly agree with every word said in here. There is just one option, which i personaly do which is not listed in here: I personaly use a dry brush to apply my "zenithal highlight effects" (as long as you still want to call it this way). But the reason why I do this is lazyness. My Airbrushstation is build up in my garage, because noone cares about the spraydusk in there it got fresh air ect. but often, during the wintermonths this spot is cold, too and sitting on a table in your heated house over hours and painting your models is much more comfortable. So for me the quality standard, which I achive with this is often enough for me, but I know it's by far not perfect. But jeah, if a newcomer on fb or anything else asks how to start in the hobby and we talk about priming moddels, I actually give him/her the same hobby tips around priming, as u told here. So in my mind a realy good video u've made here.
@NikkiAnnMarie
2 жыл бұрын
You mentioned you would briefly go over a third kind of rattlecan in the intro, but I don't think you did later on - were these artist's rattlecans, like Molotow/Montana? My experience with those is that they're about the price of hardware store cans, but a nicer quality paint, and the interchangeable nozzles for different applications are nice too, almost a high throughput airbrush at that point.
@VinceVenturella
2 жыл бұрын
Yeah, the graffiti and artist rattlecans were the next.
@karlmarxjr7049
7 ай бұрын
Wow from a total noob to anything to do with paint, you've saved me a bunch of time and moneh about what primer to get XD. Thanks!!
@candykain2041
2 жыл бұрын
Great video! The only thing I disagree with is lumping GW's spray paints in with the others, from my own research (and emailing GW a lot) their sprays aren't primers. They just use basically normal paint and propellant. However I should note that the GW reps I have contacted all seemed to universally be parroting the same answer without giving much of an explanation. With one of them stating that while they aren't primers they are 'frankenprimers' which apparently means it's GW's own special blend that isn't quite a primer but will be fine anyway. This was the most baffling statement I got during my research. This got so annoying trying to find out I basically just gave up after a while, they're fine regardless it's just really dumb how much GW just can't answer a question properly.
@ODA204SBD9
2 жыл бұрын
Emailing the customer service or sales teams with questions about chemistry makeups (especially if their proprietary) isn't going to get you great results, they're simply the wrong people to ask
@VinceVenturella
2 жыл бұрын
I think they are basically meant to be a 2-in-1, there is a polyeurathane element, and acrylic paint, which I think is the same mix.
@M0U53B41T
2 жыл бұрын
Brush On Primers - useful for touchups, small figs when you don't have space to pull out the airbrush (have a dedicated airbrush setup) and/or can't use spray cans [weather, humidity whatever]. Definitely going to be doing more Zenithal priming as light/shadow placement etc is quite hard for me and my eyes are definitely not getting any younger! One thing I think that's also true about using zenithal, espeically if you're using a grey primer on grey sprue, it can seem to help show off what you may have missed earlier on the model. Other great primers not mentioned would be the lacquers - they are an absolute joy to airbrush, no dry tip etc, but definitely need serious equipment so you don't inhale the vapors (airbrush booth with double vent, decent organic vapor mask, and an airbrush with sealed bushings so the lacquer and cleaner doesn't eat the seals)
@VinceVenturella
2 жыл бұрын
Good notes on all points. :)
@Pewpewchewchew
Жыл бұрын
I feel like there's pretty good value in hobby spray primers/paints over hardware primer in some cases. If you're building "main line" armies or historical miniatures it can save a lot of time and get a pretty consistent & color matched result. New to the hobby, been building Ultramarines for 40K and American tanks for Flames of War. Where I am, HW primer (13 CAD) isn't terribly cheaper than Vallejo (15 CAD) or GW's (22 CAD). So I feel like getting the military colors from Vallejo or the blue from Citadel is actually a good value pick time and quality wise. Of course I certainly wouldn't buy a generic white or black primer from Citadel. Also great work on the channel and thanks for taking the time to respond to comments!
@VinceVenturella
Жыл бұрын
Always happy to help
@weinstocksart6155
2 жыл бұрын
Graffiti rattle cans I've heard are good. They have different tips that allow you more control of the paint exiting the can.
@VinceVenturella
2 жыл бұрын
This is correct, it's still the same stuff, but you can have a lot better control.
@xenoterracide
2 жыл бұрын
So zenithaled Iron Man the other day knowing that I was going to paint him entirely in metallic paints. I wasn't sure if it was going to show through. Turns out even after being airbrushed with scale 75 Elven gold. If I look from top down and bottom up I can tell the difference between the dark and the light that I used underneath. So yes even if you use very opaque paints a zenithal can show through. Also I noticed that you're not mentioning that you can zenithal with TMM itself; For example I used Vallejo metal color steel on the bottom with Ultron and then I shot it with aluminum from the top. This may not result in your display quality Mini's but it looks pretty good in my opinion.
@VinceVenturella
2 жыл бұрын
Yep, most paints are transluscent in some way so there is value.
@youtmeme
Жыл бұрын
excellent!! as a newbie painter of miniatures, I have not painted anything before except in school, I find all this info awesome!!! ty!!!😊👍🤙✌✌
@VinceVenturella
Жыл бұрын
Glad it was helpful!
@absolutecardboard1703
2 жыл бұрын
I'm just getting into the hobby and this cleared up ALOT for me. Thank you so much!
@VinceVenturella
2 жыл бұрын
You are so welcome! Always happy to help. :)
@deganteng5625
Жыл бұрын
Thank you for your insight. I am leaning towards handbrush now, as I live abroad in a very compact apartment and currently cannot afford that much money to invest on airbrush. It's not only about the airbrush kit + compressor system, but also the appropriate spray booth. But once I return home and have more stable income, surely airbrush is the best bet for me
@pedroalves6425
Жыл бұрын
Best tutorials on the internet! Thank you. Very comprehensive.
@Grithertime
2 жыл бұрын
You are a machine sir with amazingly helpful insights to painting efficiently and not wasting time!
@VinceVenturella
2 жыл бұрын
Always happy to help.
@aspermypreviousemail5907
2 жыл бұрын
I enjoyed this video because even if I didn't need any more information about primers, I did need more Vince in my life.
@VinceVenturella
2 жыл бұрын
Thank you, always happy to help. :)
@socalastarte6727
2 жыл бұрын
Vince I’m a big fan of your work, and I’ve watched countless numbers of your tutorials over the years. I, for the most part am a 40K army painter. I’ve painted somewhere in the neighborhood of about 15000-18000 points of armies ranging from various Space Marine Chapters to Ad Mech and Necrons etc. I have seen so many videos claiming that Zenithal priming is a must and essentially if you’re not doing it, you’re doing it wrong. I tried it, and I must say it was a complete waste of time. When I paint say a Blood Angel, I’m priming with Mephiston Red with a rattle can ( I live in So Cal and it’s always between 50-80). I based my entire army in about 15 mins. Sang guard got a gold rattle can primer. Why would I waste ALL that time spaying it black, waiting for it to dry, then spraying white over it, when it’s going to be red armor? All my stuff ( other than my early models) are above Tabletop Standard. I’m not winning a golden demon, but they all look good. If folks want to get their minis on the table faster, they are better off skipping that step.
@VinceVenturella
2 жыл бұрын
Sure, I mention that in there, no issue. If that's what what you're looking for, then the colored primer is the way to go. Here is what I will say as an alternative. If you zenithal and then just use a red ink or contrast paint. Sure, there is some more time in prep undershading, but once you have, you have a tremendous amount of contrast already baked in. Space Marines are one of those where the zenithal can really, really shine.
@socalastarte6727
2 жыл бұрын
@@VinceVenturella I wish I could rent you for like two hours and have you show me. I've tried (multiple times) after watching tutorials from you, Uncle Atom, Miniac, Ninjon etc, and I just don't get it. I respect your work a ton, and you have ABSOLUTELY helped me on painting journey, this technique however is lost on me.
@spacedock873
2 жыл бұрын
Hi Vince. Really interesting video. As a newbie to mini painting (but an experienced model maker/painter) I have found it baffling that so many "experts" just prime in black as if that is the way to do it - end of. It sometimes seems like an example of "Emperor's new clothes" - everyone else does it this way so they don't want to be different. Thank you for being so clear and direct and cutting through all the bull about black priming. As you point out, trying to get good reds, yellows or whites over the top of a black base is a fool's errand. Starting with a mid-tone primer allows you to work down to shadows (shades) and up to highlights. Preshading panel lines on armoured vehicles, aircraft and spaceships is a standard methodology that simply cannot work over a black primer - how do you shade black?! The same must be true with minis. Indeed, you have done videos where you show zenithal highlighting AND undershading - going up and down from a mid tone. To me this is perfectly logical and intuitive. It is great to see you not following the crowd but presenting logical and sensible arguments for doing things in a particular way in order to achieve a particular result - changing the method to suit the particular circumstance. I found it quite strange adding sand and red primers to my racks for fleshy minis - they look a little odd next to the various shades of grey used on the spaceships! My only disappointment is that we only get one hobby cheating video per week 😔 I know you do Warhammer Weekly too but any chance of some more mini content? Please 😬
@VinceVenturella
2 жыл бұрын
Glad you enjoy, not much time right now, I still work a full time job of course. :) - But there will always be new videos coming. :)
@DMNKLR_official
2 жыл бұрын
Stynylrez + following the Badger instructions (essentially, they tell you what needle size to use for best results, etc.) = sublime prime time. Additionally, one can adjust the colors with a little acrylic ink, and not cause issues with it. They also have a crazy assortment of colors now, too, and even brushing it on is crazy effective. Prime, set it in front of a fan, and within mere minutes you're already painting. Also, every paint I've tried over Stynylrez goes on amazeballs, from generic craft paints to Citadel. It's also super-durable, but is easy to remove/clean up when necessary. IPA is your best friend, when that happens.
@VinceVenturella
2 жыл бұрын
Yep, I do very much like Stynelrez primers. :)
@Phanterinos
Жыл бұрын
Thank you Vince, i recently bought my first airbrush and and i will prime my mini's from now on with it. Very detailed info expecially i appreciated the Thinner+primer tip.
@VinceVenturella
Жыл бұрын
Happy to help!
@briangilgan
2 жыл бұрын
I've used all three airbrush primers mentioned in this video, but Stynylrez is the only one of the three that is sandable without tearing. And to get to that point, I find it has to cure for 8 hours or so. If you never miss seams or mold lines during your prep, this probably isn't a concern, but I can hardly live without it being sandable.
@buzzedaldrin7316
2 жыл бұрын
I found this out the hard way recently. Vallejo released datasheets which says that their primer can be sanded but after following their directions to the letter i found this is definitely not the case. After letting it cure for an entire day it tore when i attempted to lightly sand with 1000 grit paper.
@questgivercyradis8462
2 жыл бұрын
I think Miniac did a video a few years ago about primers too, including which ones could be sanded and which ones couldn't be. Vallejo definitely dries a bit like a skin on the figure, not a hard item. Not all bad but if you wanted to sand, oof.
@VinceVenturella
2 жыл бұрын
I will be honest, I rarely sand primers, so I didn't think of this particular point.
@casspirmk6338
2 жыл бұрын
Vince, I have seen people just blow gas out of Rattlecan, then puncture a hole and relocate all liquid primer to plastic bottle for air brush use. Because 60 ml primer bottle cost 0.1 USD per ml ,while 400 ml rattlecan costs 0.035 USD per ml. And thanks a bunch for such a great tutorial
@VinceVenturella
2 жыл бұрын
Interesting! I've never heard of such a thing.
@walterdimmick653
2 жыл бұрын
Great video, here are some additional tips and considerations: 1: Alternative to rattle cans for scenery. Small or "mini" automotive spray guns are very inexpensive. A seviceable gun will cost like same as 2 or 3 GW brand rattle cans. You probably will need a garage 1-3 hp pancake compressor though, less than $100 and of course can be used to fill car, bicycle tires etc. This setup will allow you to have a wide spray pattern like a rattle can as compared to an airbrush. In the mid to longterm even if you do not have a compressor, if you are doing a fair amount of scenery, this will be a very good option from an economic perspective. The pancake types can be oil-less but if you run it in a filthy environment the teflon coatings can degrade fast. A negative of this type of compressor is that they are extremely noisy. So wear hearing protection and consider who else is home, etc. 2. Brush on primers. This is from the perspective of someone that has been painting wargame miniatures since 84, worked as professional house and automotive painter as a college student and worked with all kinds of materials. Anyway, brush on primers can be very useful, specially if you live in a very cold climate and if you are set up for it. Wouldnt use it for any vehicles though. First I noticed that you only really talked about water based brush on primers in your video. These can be more problematic for injection plastic than resin or metal figures. This is due to the low adhesion to the surface in a liquid state and water tension drawing the paint away from some of the surface and forming droplets, bubbles, and uncovering where you laid down primer. If you need to paint a plastic figure with brush on primer I suggest using an oil based primer. These are readily available in any train hobby shop and well stocked hobby stores that also sell model cars and trains. Water base primer works better on resin or metal but there is a lot of variability and I have tried out, many, many brands over the years. I suggest if you do this approach to get a brush and dedicate it to the single purpose of oil based priming and clean it well with mineral spirits immediately when done. I do not use brush on primers except as last resort. But lets say you just want to prime a small warband in the middle of the winter in a very cold climate, then it is a good option.
@VinceVenturella
2 жыл бұрын
Good thoughts all around.
@Volcodom
2 жыл бұрын
Oof I have felt the pain of letting primer sit too long in the cup and getting my needle stuck. Great video as always and not too much focus to get us into the weeds. The talk of angled zenithal priming can become so obtuse (even when I explain it) because once you get to the point where you are experimenting with value sketches that's all you end up talking about. I think Marco's fantastic video on rattle cans is a premium next watch for the crowd that has big projects they want to do well, and I've found Uncle Atoms demo on how to prime terrain gives a great overview of the actual spray technique to keep rattle paint smooth, but for the basics of priming and getting an understanding of how it all works and a general idea of when to use each tool this is a grade A resource that I'll come back to many time. Thanks as always Vince your vids have made me a better painter many times over.
@VinceVenturella
2 жыл бұрын
That's wonderful to hear and I am happy to help (I love both of the videos you mentioned as well). :)
@andimusprime3383
2 жыл бұрын
Great as always Vince. I would love a similar video on varnishes some day
@VinceVenturella
2 жыл бұрын
Great suggestion!
@marcbowling6451
Жыл бұрын
I brush primer on during my lunch hour at work just so some sort of forward progress is made. I also have thoracic outlet syndrome so sometimes I literally can't airbrush or rattle can but can brush it on. Just some uses for it. Thanks for the content!
@printandplaygamer7134
2 жыл бұрын
I inherited an airbrush, but haven't worked up the guts to use it yet. I use rattlecan primers (usually Krylon Ultra Flat Camo line, per Tabletop Minions) whenever weather permits, but in a pinch, I will brush on the Vallejo Surface Primer. Brushing it on is slower than spray priming, sure, but I haven't had any problems with adhesion or obscured details. Each fall, I try to assemble and prime a good supply of units to paint thru the no-rattlecan months of the winter, but when I need to paint an unprepped model or two in the dead of winter, brushing on the Vallejo Surface gets the job done.
@VinceVenturella
2 жыл бұрын
If you have the airbrush, get after it! There is no reason to be afraid and you never improve if you don't start. There is nothing scary about it and I have videos on cleaning. You can do it!
@winterzee
Жыл бұрын
Before I bought an airbrush for priming, I always bought airbrush primer and just brushed it on with no problems
@JohnnyWrongo-b9l
11 сағат бұрын
I've done the sane, also with no problems.
@warrencann3824
2 жыл бұрын
Another fantastic video. You are are a great teacher Vince!
@VinceVenturella
2 жыл бұрын
Thank you, always happy to help. :)
@davidholden7277
2 жыл бұрын
Ah, a primer on primer. It's the video we didn't know we needed. Thanks for your insights as always Vince
@VinceVenturella
2 жыл бұрын
Just wait until I have to go to the Primer for the Primer on Primers.
@chucklamb3496
2 жыл бұрын
For beginners, it’s good to have a video on stripping miniatures. I had to do quite a bit at first. Great video info tho on priming, thanks Vince
@VinceVenturella
2 жыл бұрын
Thank you, happy to help. :)
@Annihilo
Жыл бұрын
I haaaaate the 2x primer line. It’s so thick compared to citadel. I just bought an airbrush and it’s amazing.
@MisterTingles
2 жыл бұрын
i'm one of those guys that prefers brush on primer, mostly because i get a more direct sense of control over how well covered the mini is, and a sense of familiarity with the model early on, all the nooks and crannies. I also have a chance to lift paint out of the recesses so as not to obscure detail, which I find happens a lot for me with rattle cans (and a lot of other people, judging by some misbegotten ebay projects i've come across), and is more difficult to deal with there. I suspect an airbrush might change my perspective considerably, but sans one for now, so here we are...
@VinceVenturella
2 жыл бұрын
Sure, the airbrush is a game changer for priming.
@brandondollar
2 жыл бұрын
Brush on primer is not great, but a good thing to have in case you miss a mold line or drop the mini or miss covering the whole mini in primer, you can use it to re-prime a spot.
@VinceVenturella
2 жыл бұрын
I just use regular paint at that point, or a drop of varnish, it will generally grip just fine (assuming the model is plastic). :)
@udipootaman
2 жыл бұрын
Seeing a notification on my phone from your channel makes me put down what I’m currently doing then check and watch the video almost immediately, especially if it’s a Hobby Cheating video.
@VinceVenturella
2 жыл бұрын
Thank you, that means a great deal and always happy to help.
@MaskedRiderChris
2 жыл бұрын
I swear by my Vallejo Surface Primer for airbrushing primer on, because I've had nothing but trouble spraying Stynylrez through my airbrush no matter what. For rattlecans, well...I admit to loving Formula P3 primer, and I'm testing out Army Painter rattlecan primer right now, but you know what? I've got regular old Rustoleum on hand and it still works just fine for me, so when I run through the AP primer? I'll stick to that one, I think. Thinner and flow improver for airbrush primer, or just thinner? I tend to use flow improver most of the time. I tend to let my primer dry overnight most of the time, but your insight on airbrush primer drying faster was hugely helpful.
@jesseshelton9302
2 жыл бұрын
It's funny, I had the 100% opposite experience with Vallejo surface primer and Badger' Stynylrez. Vallejo would gum up my airbrush after a minute or two of priming, while I have little to no problem with the Stynylrez. I have no idea why.
@VinceVenturella
2 жыл бұрын
Sounds like you've got lots of options there. :)
@nikroth
3 ай бұрын
Thank you ! I was in real need of what to pick for my next primer !!
@georgeratkowitz8023
Жыл бұрын
50-70% humidity and 10-17C is the perfect condition for priming with rattlecans. If it's grittier dusty result, go towards the 70% humidity range. When I prime models with rattlecans, i always bring some extra models as a test for a first spray, just to be sure it doesnt mess up the whole batch, as you've mentioned. I use black paper (for white/grey primer) for the purposes of blocking the first spray over the miniature, so i start spraying on paper (immediately see if it needs more shaking), remove paper while still spraying, and you basically can prime precise to an optimum distance (this way you avoid the graininess it produces with the longer distance). Also, gloss primers are awesome if you plan on painting the base colors with oils and smoothing, enamels/oil washes for 40k flat surface vehicles ie. The gloss finish is perfect for oil drybrushig also. You can later varnish it with amazing Vallejo matt varnish rattlecan, if you plan on doing the textures with acrylics afterwords.
@iamryankelly
2 жыл бұрын
I've recently started using enamel primers (alclad) through the airbrush, and they are a real treat! Incredibly durable if you need to do any sanding. The only drawback is they can be very smooth and glossy, so as you said, the paint doesn't adhere well, especially oils. So a quick matte varnish as a last step is usually necessary.
@VinceVenturella
2 жыл бұрын
Yeah, I should do a whole follow-up on other primer types.
@krzysztofmathews738
2 жыл бұрын
This is an excellent, very clearly articulated overview. Very good!
@VinceVenturella
2 жыл бұрын
Thank you, always happy to help. :)
@quietside3734
2 жыл бұрын
Thank you for your service to the hobby.
@VinceVenturella
2 жыл бұрын
You bet - always happy to help. :)
@michaelteller7503
9 ай бұрын
Dumb place to ask this, but why not: i just got an airbrush (thanks to inspiration from you and Marco Frisoni). I put liquitex white ink in undiluted and with vallejo ab medium (thinner and flow imp) and it settled in recesses like a wash rather than creating a smooth zenithal. I could add a little medium to thicken it, but Ive seen youtubers use it straight and Id rather fix my skill issues than thicken it for a quick fix.
@VinceVenturella
9 ай бұрын
Sounds like either too thin, or too much PSI or too much ink. When you first start with your airbrush, you don't have the trigger control, so you're either blowing too much air, ink or thinning it too much. You likely need to be lighter on the trigger and try to get a soft gentle mist of the ink and build it up.
@alecryan5962
2 жыл бұрын
Was honestly expecting to be told that the Rust-o-leum primers were worthless and the miniature rattlecans were the only rattlecans worth using. Glad to hear that I don't have to spend $15 whenever I want a new color of primer
@VinceVenturella
2 жыл бұрын
Nope, just additional money for nothing. :)
@iceaxeminiatures7694
2 жыл бұрын
One tip I've found for applying Stynylrez is to do it in two coats -- a light mist coat and a wet coat. For the first coat, just do a light mist coat and let it dry for a couple minutes (or if you're doing a bunch of dudes, by the time you get to the end the first dudes should be ready), then come in heavy with the second coat. While Stynylrez is pretty forgiving for going nuts with a heavy wet coat, I find that first light tacky coat helps a lot for getting that second wet coat to cover evenly and stay in place when you lay it down.
@VinceVenturella
2 жыл бұрын
Yep, I am always a fan of two solid coats of primer, I tend to go with both thin, but yes, one nice part about Stynelrez is that it shrinks.
@prickswithstix1113
2 жыл бұрын
Great video on the basics. I am so glad you continue to do these types of videos. I always learn something if not reminded of something I need to re focus on!!!!
@VinceVenturella
2 жыл бұрын
Glad it was helpful!
@lawrenceelgrin2205
2 жыл бұрын
An advanced thing to shadow. In nature everything reflects off of one another, and it's all OSL, look at master charcoal figure studies on stained parchment. And the brilliant mini painters that use the technique. Take your hand and place it farther and closer to different objects. Your hand's shadows change brightness and hue.
@VinceVenturella
2 жыл бұрын
Well said!
@PaintMinisLive
2 жыл бұрын
Hi Vince, I've just discovered your channel. Great work and excellent information presented in a well put together presentation. I've been brush painting for a couple of years and recently started using an airbrush to spice things up a bit. Like any eager newcomer to an airbrush I decided jump right in with priming my models with Vallejo primers. I followed the normal recommended procedures like thinning the primer just a bit and so on and had great success, I would clean out my air brush after each session, not realizing that I was making a huge mistake. My airbrush has a two component needle guard, meaning that you can unscrew one "half" of the needle guard and then the other to get to the parts where the needle and nozzle meet to spray the paint. I was left with a huge build up of dried primer all over this inner half that had built up over the course of many sessions. It keeps dropping dried flakes of primer onto the needle and clogging the finer components every now and then and is very much so cured onto the metal. What would be your recommended procedure for cleaning this? I don't want to damage the components or their coatings so I am reaching out as I have not seen anyone else cover this around the net. Thanks again and keep up the great work!
@VinceVenturella
2 жыл бұрын
Welcome! Glad to have you along on the hobby journey. So if you have paint dried in the nozzle, then you need a needle cleaner tool - www.amazon.com/Maxmoral-Stainless-Airbrush-Cleaning-Cleaner/dp/B091YVZG7S/ref=sr_1_5?crid=1LWS6XKZ7HR3G&keywords=needle+cleaner+airbrush&qid=1656631395&sprefix=needle+cleaner+airbrush%2Caps%2C121&sr=8-5 If you're dealing with paint anywhere else, then you could always soak it in something like isopropyl alcohol which will loosen everything up and you can then scrub. Some pipe cleaner tools can then be used to scrub, www.amazon.com/Airbrush-Painting-Cleaning-Accessories-Stainless/dp/B09GYCF2TF/ref=sr_1_6?crid=1LWS6XKZ7HR3G&keywords=needle+cleaner+airbrush&qid=1656631525&sprefix=needle+cleaner+airbrush%2Caps%2C121&sr=8-6 Worst case, you disassemble and use an ultra sonic cleaner it will get everything out. I like jewelry cleaner in the sonic cleaner.
@PaintMinisLive
2 жыл бұрын
@@VinceVenturella Thank you very much for the reply!
@michealpulkka6809
Жыл бұрын
aight, even if proper shading is a bit too intimidating before I've brushed a single stroke on my minis, the zenithal I put on just looks so cool.
@VinceVenturella
Жыл бұрын
Absolutely!
@13Robzilla
2 жыл бұрын
For rattle can, Montana and airbrush Pro-Acryl, hands down best bang for the buck. Tried the rest, experience was the test.
@VinceVenturella
2 жыл бұрын
Yes, the Montana is an interesting option.
@adamholt5395
2 жыл бұрын
A nice tip that I picked up from either Brent from GobbertownHobbies or Scott from Miniac is to use black primer and white ink for your zenithal highlight. I like this method because I don't have to worry about thinning 2 paints for priming. I just use the black, clean out the air brush, and use the white ink, which typically doesn't need to be thinned down.
@VinceVenturella
2 жыл бұрын
Yep, white ink is a perfectly good tool for zenithal, you want to be careful, in high humidity environments. The ink can reactivate, one way you can help that is to give a good varnish over your ink. :)
@jameshadley9813
2 жыл бұрын
I used vallejo airbrush primers as brush on primer, with a big old basecoating brush. I don' have space for an airbrush in my small flat, and it works OK.
@VinceVenturella
2 жыл бұрын
Yep, if it's what you can do, it's the best of the bad option.
@theastrasolus7767
2 жыл бұрын
I am one of the people who thought using thinner with Vallejo Surface Primer was a no-no. I’ve never had issues until recently, but the next time I prime I’ll drop a few drops of thinner into the airbrush. Thanks!
@VinceVenturella
2 жыл бұрын
Always happy to help. :)
@nathanlovin
Жыл бұрын
Wow. Started back into the hobby in June this year. It’s December now and I just bought an airbrush. Glad to hear I’m ok track 😂 got so tired of seeing all the things you could do with it.
@catminds6050
2 жыл бұрын
As someone who lives in a small apartment in a cold city that banned the sale of rattle cans: I primarily use brush on primers and still think Vince is correct about them. It’s worth it to order a rattle can and figure it out for anything bigger than infantry models. BUT if you do want to use a brush on primer I highly recommend liquitex black gesso. Thin it down with some water and be careful not to clog details and you should be golden. As it cures it will further shrink, and I find the painting surface to be pleasantly toothy. If you want to get a zenithal effect you can use a dry/makeup brush over this like Vince has shown before.
@VinceVenturella
2 жыл бұрын
Yep, the good old drybrush zenithal is a real life saver for those without airbrush. :)
@oliverp3545
2 жыл бұрын
Another use you find for coloured rattle cans is that it's a great way to establish 2 different colours for transition. Take for example a vehicle, you can prime it a darker green, then use a blue primer on the back and yellow at the front, then you can simply air brush or dry brush the transition.
@VinceVenturella
2 жыл бұрын
Yep, I should have articulated that more clearly as you saw me using the two different rattle can colors (I should have been more clear it could have been any colors and any lighting situation). :)
@RieksVisser
2 жыл бұрын
A HC video on painting ergonomics would be great. Especially hearing you can paint for 12 hours and longer. I can maybe do 2 hours before my back or neck start complaining. I have some ideas but hearing from someone who does 20 hours would be great
@VinceVenturella
2 жыл бұрын
Great suggestion!
@stanlee2200
2 жыл бұрын
I deal with the same issue. If i air brush for more than a few hours my shoulder starts to cramp up and if i continue to paint anyways then that stiffness and pain runs all the way up to my neck and down my arm. Idk if im just getting older or its something most ppl deal with when painting that long without a break. I just lose all concept of time when im painting.
@BarokaiRein
2 жыл бұрын
Personally I'm a big fan of scale75 black primer. Covers well,no issues with bubbling like vallejo one does,it's really matte and I just do a zenithal with white ink. Hasn't let me down yet.
@VinceVenturella
2 жыл бұрын
Haven't tried them, but I should give them a try
@fateweaver9844
2 жыл бұрын
Its nice to see I'm not off my rocker when it comes to automotive primer. I refuse to pay $20 for a black paint (and Citadel paint is not priner. Paint and primer are NOT the same thing). I actually use Rustoleum Camoflage line. They stick to everything and dry ultra matte. They are paint, not primer but are formulated to adhere to plastic without primer. I've never had issues with them straight onto plastic. Also, a little scrub with soapy water before priming never hurts. Plastic doesnt have mould release like resin but human hands do come into contact during the packaging process which can leave oil and other composites.
@VinceVenturella
2 жыл бұрын
I've never washed any plastic miniature and never had an issue, but you do you of course. :)
@CaptRapticon
2 жыл бұрын
I have got a cheapo airbrush which I mainly use for priming(Planning to upgrade to a proper one soon). Gotta say it really is a game changer for me. i still use rattle cans for bigger projects or batch painting. But for small bunch, it really works a charm especially Zenithal. The appeal comes in that I don't have to worry gumming up the mini compared to rattle cans.
Пікірлер: 979