Amazing review! Just got the PASSK B2 pack (with charger 4.5A and 4Ah battery) for 80€.
@BrokeLifeEU
19 күн бұрын
Thank you! That is a good price for all of that for sure! I hope it does all that you need it to!
@CatalinIonut98
3 ай бұрын
I would love to see how would you want to convert the 400Nm B2 to brushless and what gains you can get .
@BrokeLifeEU
3 ай бұрын
I'll give it my best to finish the project!
@GLMtr
3 ай бұрын
@@BrokeLifeEU that would be awesome I've got one with broken motor (magnet snapped in half) couldn't find replacement so I converting it to brushless one would be a little beast.
@BrokeLifeEU
3 ай бұрын
@@GLMtr Not to give you too much hope but I have it at 95% done I just thought nobody would be interested so I worked on other things in my spare time. I will get back to this project then! Only need to finish off another video and then I can get back to this. I won‘t even cost too much to convert. You‘ll see I hope I can get there!
@CatalinIonut98
20 күн бұрын
@@BrokeLifeEU any update on the project?
@BrokeLifeEU
20 күн бұрын
@@CatalinIonut98 Not going good, I am disappointed in the outcome. I can post the video if you wish to see it but I failed to reach the numbers I was after.
@memutu
3 ай бұрын
You'll be right about the A1. I've converted the b3 with the brass washer, but it wiggles after some time, I have a steel one but didn't have the time to switch
@memutu
3 ай бұрын
That a1 is comparing with the 860 from dewalt, somewhere near that beast
@BrokeLifeEU
3 ай бұрын
You need to find time and get the steel bushing in. It is a game changer! As for the A1 they should start making it again as a throwback line or something. Because I need a couple more of them 😂
@PetyrWo
3 ай бұрын
A1 is the best as I thought. I wish I can find one for a good price but no chance now.
@BrokeLifeEU
3 ай бұрын
Yes, I think I got this one for a good price at €100 can’t seem to find one for less than €130 now
@JeffersonHumber
3 ай бұрын
Really want a C3 but I don’t think Lidl sell them in the UK
@BrokeLifeEU
3 ай бұрын
I don‘t understand why they do that. I am pretty much sure the market for Parkside Performance tools in the UK will be large enough to even sustain an online shop for these.
@user-yy8mc1mi9f
3 күн бұрын
U have video on parkside performance A1 conversion?
@BrokeLifeEU
3 күн бұрын
Unfortunately no, because it is not straightforward. I can provide you with links for the parts and some instructions, however you need access to a lathe or a machine shop in order to perform a good conversion.
@user-yy8mc1mi9f
3 күн бұрын
@@BrokeLifeEU yes plz!
@BrokeLifeEU
2 күн бұрын
Anvil - www.aliexpress.com/item/1005006685992991.html - this comes with a base that has a height of 6+mm, which you somehow need to bring down to 5mm. Can be done with a bench grinder, angle grinder, easiest to do on a metal lathe. Washer - either enlarge the inside diameter of the original one to 16mm or get one of these - www.aliexpress.com/item/1005003106128837.html - M16, however it has a height of 2.5mm you need to bring that down to 2mm, This is easy to do on even some sandpaper, however it requires a lot of time. Alternatively get the M14 as it has a height of 2mm and drill it out to a 16mm inside diameter. Bushing - only one option and it is a steel one. www.aliexpress.com/item/1005005414399400.html - 16x20x14 this bushing fits the above anvil perfectly. The height is the right one as well, unfortunately the outside diameter is the issue. It is 20mm as it comes, however you need to make it 19mm. The only way to do that is on a metal lathe. Basically for all 3 parts of this conversion you need a metal lathe.
@user-yy8mc1mi9f
2 күн бұрын
@@BrokeLifeEU thanks I will try to fix it
@BrokeLifeEU
2 күн бұрын
@user-yy8mc1mi9f You are welcome! Let me know if you convert it. Did you see the video? It is a little beast indeed!
@TheRedSign
3 ай бұрын
Hi, ich bin an einem Drehschlagschrauber interessiert als Universalgerät, d.h. für Schrauben und Bohren (soll auch Beton schaffen). Ich benötige das Gerät nur für den alltäglichen Gebrauch Zuhause, wie Möbelinstallation etc. Nun habe ich B3 schon seit einiger Zeit geliebäugelt und nur auf ein gutes Angebot gewartet (z.B. Set mit Akkus + Ladestation), doch das Modell wurde ja durch C3 ersetzt. Ich habe bereits dein anderes Video über den Vergleich gesehen und war auch über das Downgrade des Schraubers enttäuscht. Zu meiner Frage: Meinst du ich kann ruhig zum C3 greifen oder hast evtl. ein Tipp wie ich an ein B3 rankomme (inkl. 5 Jahre Garantie)? Wie sind die Unterschiede Zwischen den Parkside Akkus und welches würde für meine Situation mehr passen? Oder würdest du mir ein anderes Gerät in der Preisklasse empfehlen (inkl. Akku / Ladegerät)? PS: Sry für eine etwas spezifischere Frage. Danke vielmals für deine Zeit und für die tollen Videos!
@BrokeLifeEU
3 ай бұрын
Vielen Dank! Wenn Sie Beton bohren möchten, ist der Schlagschrauber nicht das richtige Werkzeug. In diesem Fall benötigen Sie einen Bohrhammer oder einen SDS-Bohrer. Wenn Sie für die meisten Dinge ein einziges Werkzeug benötigen, würde ich einen Schlagbohrer empfehlen. Es wird jedoch nicht die Räder eines Autos abnehmen. Was den B3 und C3 betrifft. Ich verwende einen C3, seit ich ihn habe, und es gab keine Probleme. Selbst wenn es eine Garantie und eine Rückgabeoption gibt, ist es nicht schlecht. Den B3 gibt es meiner Meinung nach nicht mehr als Neuware. Batterien. Mir gefällt der intelligente 4-Ah-Akku. Es ist klein und leistungsstark. Die 8Ah ist etwas zu schwer. Die nicht intelligenten Batterien verfügen einfach nicht über Bluetooth und bestehen aus verschiedenen Zellen. Nicht smart 4Ah ist auch gut, aber größer. Die 2Ah reichen für diese Werkzeuge nicht aus.
@TheRedSign
3 ай бұрын
@@BrokeLifeEUVielen Dank für die schnelle und ausführliche Antwort ;)
@BrokeLifeEU
3 ай бұрын
Gern geschehen!
@TheRedSign
3 ай бұрын
@@BrokeLifeEU Da fällt mir noch ein, welche Bohrer sind deiner Meinung nach am besten zu Empfehlen. So, dass die Preisleistung stimmt. Ich habe gehört, dass die günstigen Parkside nicht so gut sind.
@BrokeLifeEU
3 ай бұрын
@@TheRedSign Ich kaufe kein grünes Parkside. Nur Schwarz - Performance. Diese sind bürstenlos. Mehr Leistung und längere Lebensdauer.
@dinkoprotrka1445
3 ай бұрын
Why didnt you test the PDSSAP B3 version, its the strongest version?
@BrokeLifeEU
3 ай бұрын
It is no longer available. And I can't justify the added cost from eBay. The A1 is also no longer available from Lidl. It can be found on eBay for 100-120 EUR and I can somewhat justify that price. Also I have tested it against the C3 in another video.
@dinkoprotrka1445
3 ай бұрын
@@BrokeLifeEU i tought you had the B3 version, here where i am its still available in LIDL for 50eur
@BrokeLifeEU
3 ай бұрын
Lucky! In most places it is not available, that is why I don't feature it as much now. Although I do agree with you, after the A1 the B3 is the best one!
@j.j7953
3 ай бұрын
Ich habe meinen Parkside C3 auf halbzoll umgebaut und es hat etwas Spiel ist das normal?
@BrokeLifeEU
3 ай бұрын
Aus welchem Material besteht die Buchse? Zwischen Buchse und Amboss muss ein kleiner Abstand vorhanden sein. Aber nur ein kleiner Raum. Die Stahlbuchse ist die beste Möglichkeit, den Umbau durchzuführen. Aber manchmal ist die Buchse zu groß und der Amboss zu klein.
@@BrokeLifeEU If the drill chuck of a drill had that much play, I would say it's not normal, but I don't know what it's like with impact wrenches
@j.j7953
3 ай бұрын
@@BrokeLifeEU I installed the copper socket but also ordered the steel
@BrokeLifeEU
3 ай бұрын
It will move just a little bit. It won't be much at all. Just some movement to show that there is some space between the bushing and anvil. It will be better with the steel bushing. I have has one or two faulty brass bushings but never a problem with the steel ones. Just make sure the anvil turns freely when you install it.
@Kuchenwurst
3 ай бұрын
Brooo why do you have _five_ of those? I wouldn't even know what to do with a single one! 😅
@BrokeLifeEU
3 ай бұрын
Well...how do I say this... I think I have about 10 in total. I have bough them used or on sale for the videos mostly. Otherwise my current go to is the PDSSAP C3 1/2" that you see in the video because I want to see if it will last.
@Kuchenwurst
3 ай бұрын
@@BrokeLifeEU Well, I guess I do know how it feels to want to own a complete collection of something. 😁
@BrokeLifeEU
3 ай бұрын
Some of these are such a bad experience that I can do with an incomplete collection. They can keep their B2 Performance impact driver and the A2 high torque. I need some more brand new A1 impact drivers. Unfortunately they are around 150-200 from eBay with shipping.
@antonius3301
3 ай бұрын
You say "andiamo"?? 🤣
@BrokeLifeEU
3 ай бұрын
🤣🤣🤣 Thanks for noticing! Got to keep things interesting right?
Пікірлер: 53