Just getting into airsoft and several of the players at my field highly recommend you! Plan to send my Krytac SPR MKII in to you here soon, love the content so far!
@wyshtechairsoft
10 ай бұрын
Thank you so much! Your kind words inspire me to make more content for you guys. Cant wait to work on your Krytac! Love Krytacs!
@ecv-uw7cu
3 ай бұрын
Friend, I have it all original, which I would recommend for an upgrade, the objective being to play as DMR, close to 450 fps.
@wyshtechairsoft
3 ай бұрын
I am not sure what you're saying. Can you rephrase?
@Auloss
3 күн бұрын
another weapon
@Naevera
6 ай бұрын
Am I the only one seeing this video in a weird, horizontally squished resolution that makes it hard to view the whole image?
@wyshtechairsoft
6 ай бұрын
Check the youtube settings and make sure the resolution is set to 720p minimum.
@pingpong808
4 ай бұрын
How’s the quality, particularly the receiver? I heard/read that the quality and materials are noticeably lacking, and not even close to their CXP line.
@wyshtechairsoft
4 ай бұрын
In my opinion, and compared to other MK18's that other brands have, like Cyma. It's not bad all and decent. It's not super fancy like the CXP, but it's what you would expect from a traditional AR receiver since it is afterall a replica of the real DD MK18.
@daven3431
3 ай бұрын
So I have the Maxx me Pro that accepts 21.00 to 21.25 will this work with the stock nozzle? Really appreciate the work you put onto your content
@wyshtechairsoft
3 ай бұрын
Thanks for the kind words! Yes, it'll work as the ics nozzle is 21.00mm
@daven3431
3 ай бұрын
@@wyshtechairsoft I've had nothing but problems with my r hopped prometheus and r hopped zci when used in conjunction with the maxx me. If i were to take out the r hop patch what would you suggest to use for more consistency from the maxx me unit? Thanks again for any help
@wyshtechairsoft
3 ай бұрын
@daven3431 any maxx hopup. Use maple leaf super macaron and omega nub and dont look back. Maxx gen2 hopups like the M4A are made specifically maple leaf buckings.
@daven3431
3 ай бұрын
@@wyshtechairsoft What color bucking would you suggest? My target fps is 395. Thanks again
@wyshtechairsoft
3 ай бұрын
Maple Leaf Yellow/60 degree.
@nickxatzh
10 ай бұрын
So if i have the red maxx and wonna put it in ics the only thing is to screw a 11.5mm insert nozzle,and if i have silver maxx to a specna for example i change the insert nozzle with 11mm?!?!
@wyshtechairsoft
10 ай бұрын
That is correct.
@Jonny-te1mk
7 ай бұрын
Hey there, I’m upgrading my ICS DDMK18 very similar to how you did, and I just wondered what sector gear you ended up putting in the gun… the one you shortstroked from the front or the one that you ss from the front and back. I’ll likely be ss two teeth just don’t know which ones to take off. (33k T238, and 18:1 gears. Thanks.
@wyshtechairsoft
7 ай бұрын
I put a rocket 18:1 gearset in it. Your combo shouldnt need any short stroking if you plan to keep the rifle at or above 400fps on .20g bbs as it should only shoot roughly 25rps.
@mrbones_7420
7 ай бұрын
I recently fried the mosfet on my ICS mk18, what replacement mosfet would you recommend for durability and ease of installation?
@wyshtechairsoft
7 ай бұрын
The perun v2 hybrid. Alot better imo.
@mrbones_7420
7 ай бұрын
@@wyshtechairsoft thanks! just to make sure i got my diagnostic right, the gun wont fire on any mode however when i disconnect and reconnect the battery with the gearbox split open, the gears will spin around a few times on either semi or auto and stop being responsive.
@mrbones_7420
7 ай бұрын
@@wyshtechairsoft also my friends have recommended the gate titan v2, how do they compate to the perun hybrid v2?
@wyshtechairsoft
7 ай бұрын
@mrbones_7420 It will be more of a pain to install as the SSS gearbox has a big square hole that will be left open when you have a Gate Titan installed. Since the Gate Titan uses a 2nd board, it is barely held in by the gearbox and will vibrate loose and cause issues unless you make modifications to the cover if the sss etu or get the Jefftron SSS etu cover from thier website. With the Perun v2 Hybrid or any single board etu. You dont have to worry about this at all. However, you won't have the bluetooth/app capability. Though, in my opinion, I'd choose the perun over the Titan since it's more simple to install and is more reliable than the Titan.
@wyshtechairsoft
7 ай бұрын
Sounds like your battery is running low. Try a different lipo.
@enricodelosreyes4246
8 ай бұрын
I would like to ask which size of Epes Nozzle dis you put? Thanks!
@wyshtechairsoft
8 ай бұрын
21.00mm if you're using the Maxx M4i (silver) hopup.
@marleyant5694
10 ай бұрын
The ICS mk18 have the CNC body? , I want to know what is the best mk18 brand to buy it and upgrade
@wyshtechairsoft
10 ай бұрын
In my opinion, the ICS MK18 is the highest quality. Ive tested the Cyma, Specna Arms, and even the GBBR Golden Eagle MK18. The ICS is much nicer and easiest to do work on. As you seen in the video, its split type gearbox makes it easy to do work on.
@KAG2203
6 ай бұрын
G&P and VFC also have AEG Mk18 replicas....
@slaxxx
6 ай бұрын
I’ll take it
@wyshtechairsoft
6 ай бұрын
Yea?
@slaxxx
6 ай бұрын
@@wyshtechairsoft lol I do love this build. I did message you last night, from your website about an Ics AR I’d like built though.
@wyshtechairsoft
6 ай бұрын
@slaxxx Sorry I havent got back to you. Mondays and Tuesdays are my days off to wind down. Im not at my shop computer to get you pricing but Ill get you one soon!
@slaxxx
6 ай бұрын
@@wyshtechairsoft no problem bud. I appreciate it.
@MrKillerHobbes
3 ай бұрын
is the perun the most reliable electronics or is there something better?
@wyshtechairsoft
3 ай бұрын
Perun etu's is the most reliable I've ever used. Right up there with perun would be Jefftron Leviathan.
@darylobey8867
2 ай бұрын
Peruns are simple to install and with a warhead perfect combo
@MrKillerHobbes
2 ай бұрын
@@darylobey8867 whats a warhead?
@LiteralNapkin
9 ай бұрын
I might get an ics mk18 soon and I was wondering if you guys do services to say Increase the fire rate and performance.
@wyshtechairsoft
9 ай бұрын
Yes we do. In fact, this video was on a customer's mk18.
@LiteralNapkin
9 ай бұрын
@@wyshtechairsoft Ah I see, just wondering we I have to pick out the parts that you put inside or do you do that because I’m not very knowledgeable with the internals of airsoft guns
@wyshtechairsoft
9 ай бұрын
@@LiteralNapkin I provide all the correct parts. All I need is details of what you want out of the airsoft gun.
@LiteralNapkin
9 ай бұрын
@@wyshtechairsoftah okay that make sense, I’ll be sending my mk18 whenever I get 👍 also could you maybe record or send me a video of the process of you upgrading it?
@wyshtechairsoft
9 ай бұрын
@LiteralNapkin I can definitely feature your mk18 in a video. When you're ready. Go on our website under the "contact us" page and fill out the details, leave your shipping address, contact info, what you want done, and ill email you back as soon as I can.
@KAG2203
6 ай бұрын
Nice setup for cutting barrels👍 No need to use a dremel on the lower gearbox to get the Jefftron ETU to fit? Do you know if it's the same split gearbox in ICS CES-P MP5 and possible to change to Gate/Jefftron ETU?
@wyshtechairsoft
6 ай бұрын
For the leviathan, you hust need to dremel a relief on the upper gesrbox so it doesnt smash the pcb when you close the upper receiver to the lower. I do not know if the CES-P MP5 uses the same gearbox shell. I havent messed with one yet to know. Either way I am sure you could even if you had to slightly mod it in some way. Heck, a KWA gearbox didnt stop me from putting a Perun v2 hybrid in it.
@KAG2203
6 ай бұрын
@@wyshtechairsoft Thank's for the info🙏 Yea, I guess almost anything is possible with the right ammount of "elbow grease". I resently fitted a Gate Aster in a PTS Magpul Masada gearbox, it has a micro switch trigger stock from factory. A lot of dremeling/sanding and cutting up a square hole for the selector plate sensors.
@wyshtechairsoft
6 ай бұрын
@KAG2203 Nice job! Sorry it took me so long to reply.
@tjmartens1
8 ай бұрын
where did u get the hop up system i can’t find it
@wyshtechairsoft
8 ай бұрын
If you're in the USA. Its on our website, www.wyshtech.com.
@tjmartens1
8 ай бұрын
thank u sir 🙏
@KozakPLful
9 ай бұрын
Hey, i got ICS MK18 S3 and i would like to know what bucking and nub is best to buy for upgrade, cuz stock ones are not keeping same pressure for BB's in hopup, so i can see some fly straight and some higher and others
@wyshtechairsoft
9 ай бұрын
Sounds like you got a torn bucking. I recommend the Maple Leaf Super Macaron 60 degree and Modify flat nub. That'll let you hop .32g bbs and get ridiculous range for an assault rifle.
@KozakPLful
9 ай бұрын
@@wyshtechairsoft Thanks a lot. I will inform about results
@wyshtechairsoft
9 ай бұрын
@KozakPLful please do and make sure the nub doesnt "pre engage" the hop when it is completely off.
@KozakPLful
9 ай бұрын
@@wyshtechairsoft Everything arrived and has been tested with tracer unit in the night. All bbs are on target now. Thanks a lot for help.
@wyshtechairsoft
9 ай бұрын
@KozakPLful That's great to hear! Nice job, and I'm glad to help!
@channel-vf8od
8 ай бұрын
Hi, Dose ICS SSS. III mosfet works with brushless motor? I would like to upgrade brushless motor in my mk18.
@wyshtechairsoft
8 ай бұрын
It does, but the SSS isn't reliable.
@channel-vf8od
7 ай бұрын
I am looking brushless motor in your website, which motor do you recommand?@@wyshtechairsoft
@KAG2203
6 ай бұрын
@@wyshtechairsoft The ICS Mosfet/ETU dosen't use active breaking?
@wyshtechairsoft
6 ай бұрын
It does have active braking as it does a decent job at preventing overspin.
@KAG2203
6 ай бұрын
@@wyshtechairsoft How come you recommend brushless (BL) motors to be used with it🤔. Can the Active breaking (AB) be disabled/turned of in the ICS SSS mosfet/ETU? AB by the ETU is not recommended (only VERY low AB should be used if it's absolutely needed with BL motors) with BL motors since it messes with the BL's own AB and with the BL's ESC that controls the AB, it can even "burn" the ESC in the BL motor.
@c8_s6
9 ай бұрын
Why maple leaf over flat?
@wyshtechairsoft
9 ай бұрын
Does better and lasts alot longer.
@c8_s6
9 ай бұрын
@@wyshtechairsoft I have the same gun, just purchased Maxx M4i Pro, which Maple Leaf bucking should I pair it with?
@wyshtechairsoft
9 ай бұрын
@@c8_s6 The Super macaron 60 degree. Use the Maple leaf omega nub for the best hopup consistency.
@c8_s6
9 ай бұрын
@@wyshtechairsoft thank you a lot. one last question 😇: what inner barrel would recommend with this set up ? (Length, barrel diameter and brand ?)I mostly play inside with 0.25 or 0.28g bb’s i am targeting 1.4 joule and 380fps thank you again! also is there anything else you think is mandatory upgrade for that gun? i only bought a hop up for now.
@wyshtechairsoft
9 ай бұрын
@c8_s6 It's honestly good as it is for indoor usage. The stock barrel is pretty good as it is, and you won't notice much of a difference unless you get an Edgi or Pdi barrel of the same length. Maybe a brushless motor and perun v2 hybrid mosfet later down the road. Not much to upgrade to be honest.
@OnTheGoKRO
13 күн бұрын
One absolutely ugly foregrip ruins the whole thing
Пікірлер: 86