This video left out something super important and the person doing video did this wrong, that washer under the nut is not a washer it is a spacer that must be placed around the splines on that shaft before the nut is tightened, you can see in video how it was not centered
@gerardodeblas
5 жыл бұрын
muy buen video gracias que numero de banda sera para una grizzly 350 cc 2008 mexicana
@jbcraig3899
8 жыл бұрын
thanks for the easy to understand video
@hunterman600cc
3 жыл бұрын
Do the belts age despite low usage? Looking at a '98 with only 500 miles...
@78FullSizeBronco
3 жыл бұрын
Yes, just like tires, they dry out and crack with age.
@Algonqiun
3 жыл бұрын
10mm socket, welp I need to go buy a new one
@armandorodriguezreyes4718
Жыл бұрын
Buenas tardes disculpe asiadonde afloja la tuerca de enbrague o clos de la grisle 350 2014 4x4
@UltimaxBelts
Жыл бұрын
Follow the instructions as shown in the video. You'll need a 22mm socket and an impact driver. It will be difficult without an impact driver but should come off fairly easy with an impact driver.
@CactusJackSlade
7 жыл бұрын
I wish they said if you were supposed to lightly lube the clutch shaft bushing or not??...
@phillacey926
Жыл бұрын
Hi im about to try and do headgasket on mi 660r 2003... Any info would be much appreciated 👍
@UltimaxBelts
Жыл бұрын
I'm sorry we can't offer any suggestions with this project. Best of luck and Happy Holidays!
@ultimategaming5022
2 жыл бұрын
When I try to take the nut off of the primary the clutch spins what should I do
@UltimaxBelts
2 жыл бұрын
If you are using an impact wrench to break the nut loose, a ½” impact should work better than a 3/8”. A pneumatic impact will typically work better than cordless. If this still doesn’t work, some people have had luck wrapping a ratchet strap around the clutch and tying it off so that it will not spin.
@WrongBozzKillers
Жыл бұрын
Thats the problem I'm having at the moment
@dylanrudolph15
7 жыл бұрын
So my grizzly 660 completely shredded a belt.. what can this mean?
@UltimaxBelts
7 жыл бұрын
I’m sorry that you had problems with one of our belts. That’s very unusual. Please send an email to belts@timken.com
Пікірлер: 20