I have many of there plates and love them, I always just break mine in with use. And these seem to last a good while the 2+6 ,3 plates for only 50$, imho breaking them in just strips life from them, I don’t mind them being super coarse for the first few sharpenings
@NORTHWESTKNIFEGUY
3 жыл бұрын
Man that was nice of him to send you a set, I got the same set and was impressed with the overall quality. Hope you and your family have a happy Thanksgiving!
@roughroosterknifesharpenin5531
2 жыл бұрын
It was. And Happy Thanksgiving a year later. Lol
@NORTHWESTKNIFEGUY
2 жыл бұрын
@@roughroosterknifesharpenin5531 Haven't seen you around for a while, hope you're doing ok man.
@roughroosterknifesharpenin5531
2 жыл бұрын
@@NORTHWESTKNIFEGUY I've had my fair share of life. And I'm over being taken advantage of on my channel.
@WHEY2GETFIT
3 жыл бұрын
Glad to have you back your videos have helped me get the edge I am looking for.
@roughroosterknifesharpenin5531
3 жыл бұрын
That's awesome. Good to hear
@mattoakley2246
3 жыл бұрын
He's back! Glad to see you're putting out videos again. It's my anti anxiety therapy. Hope you're enjoying the new house. Thanks
@roughroosterknifesharpenin5531
3 жыл бұрын
We are. And glad to help
@timothyragsdale5891
3 жыл бұрын
Glad to see & hear from you again. I purchased mine back in the Spring & I'm very happy with them. I like that bug out lol!
@robfahey1349
3 жыл бұрын
Also I believe they say lifetime warranty. I hope ultra sharp catches this video and listens to some of your input as well.
@Ripper7620
3 жыл бұрын
Hey man, you're my new favorite sharpening tutorials channel on the tubes. Good stuff!
@roughroosterknifesharpenin5531
3 жыл бұрын
Thank you. I don't think I'll be posting anymore. But I have lots of videos.
@barkingspider2007
3 жыл бұрын
Ultra Sharp Diamond plates, Picked up the 300, 600, 1,200. They worked great. I use them to quickly put an edge on very dull knives.. Thanks for the recommendation! Much appreciated.
@samla2404
7 ай бұрын
I'm glad you're doing ok which is all it matters. Thank you sir.
@samla2404
7 ай бұрын
Good afternoon, I just wanted to say that this channel has benefit us more than one can think. I have a quick question: Kindly where have you been sir? Are you planning to make any more content. Please let us know and thank you so very much for everything you've done for the sharpening community.
@roughroosterknifesharpenin5531
7 ай бұрын
I doubt I'm gonna make any more vids
@jasonedwardledburynewzeala9897
3 жыл бұрын
Awesome to have you back chris. Great video's as always. Keep up the great work. Love from New Zealand.🙂👍🌏🌏🌏🥳🥳🥳
@roughroosterknifesharpenin5531
3 жыл бұрын
Thanks man
@helluvabullet
3 жыл бұрын
Thanks for the videos man, I just got my first Sebenza and the stuff i have learned from watching you has made me un afraid to use and really truly enjoy this and my other knives.
@roughroosterknifesharpenin5531
3 жыл бұрын
That's good. Glad you are
@analogoutdoors
3 жыл бұрын
Nice to see you again! I have the 300 grit. IMHO they are very nice plates.
@robfahey1349
3 жыл бұрын
Nice glad to see you back at it man. I've been waiting for this video for awhile and initially I was disappointed but relieved alittle when it was just high spots. I'm glad the stones are working out for you and hopefully they outdue the dmts. In all fairness too you did say coarse lol I was thinking of that 2200 or 3000 wondering how they are as well. Wishing you all the best if we don't see you before the upcoming holidays man and hopefully the stones serve you well.
@nickjaussaud9979
2 жыл бұрын
Was on the fence about these. Had a set of DMT i recently lost while moving. I think I will give these a try. Thank you for the video!
@theone031
3 жыл бұрын
Hope all is well. Miss seeing your videos. God bless.
@fulltangbushcraft6382
3 жыл бұрын
Ultra sharp makes good stuff
@waynebean1521
3 жыл бұрын
Made my day! Glad you're back! I like my UltraSharps so far....problem is, not getting any knives to sharpen due to COVID, I guess. Not ONE hunting knife!
@bamafaninky861
3 жыл бұрын
Hey Wayne contact me at bamafaninky@yahoo.com if you want.
@derekgolden2996
3 жыл бұрын
Good to see you on. Just wanted to point out that on the last video you put out you talked about the sound the blade make as it goes across the stone. I couldn't hear it in that one but I sure can this time. You get a different set up?
@roughroosterknifesharpenin5531
3 жыл бұрын
No same thing as always
@stevekushman3030
3 жыл бұрын
Nice video Chris. Glad you like the Ultra Sharp Diamond plates and hope they perform as expected as you continue to use them.
@littlewoody5539
Жыл бұрын
How are those diamond plate’s holding up ?
@jasonedwardledburynewzeala9897
3 жыл бұрын
Thank you to the person who made this video possible by donation thesr diamonds stones. Well done! Awesome. Thank you so much for your generosity. Thank you for helping me decide what to update my kit with. You are a legend.🙂👍👍👍🔪🔪🔪🌏🌏🌏 thankyou from the bottom of the world.nz 🇳🇿🇳🇿🇳🇿
@analogoutdoors
3 жыл бұрын
They will definitely slow down a bit as you break them in, or at least the 300 I have did. But I love mine, and well worth the money.
@ureasmith3049
2 жыл бұрын
Thanks for the review. I'm gonna try the Peter Sellers technique for sharpening my Woodworking tools. He uses EZE lap, but I saw this 3 stone set for 117. I'm gonna go for it thanks.
@roughroosterknifesharpenin5531
2 жыл бұрын
I use that technique. It works well.
@JesseNepal
3 жыл бұрын
This is why im subbed to your channel, its down to earth, no nonsense and no bullshit. Just continue what you do and i'll keep on watching! By the way, i have a scandi grind pukko style blade that has developed a small crack in The edge. It is not a chip yet only a small line If that makes sense. Does my knife need a regrind or can i sharpen it the usual way? Thanks again and take care / Emil
@roughroosterknifesharpenin5531
2 жыл бұрын
Well it depends. How deep is it?
@jdemeter4357
3 жыл бұрын
It's saddening that we/ I can't watch your live video's after they are done 😭😭😭😭
@genepaulbrown
3 жыл бұрын
Hey Rough Rooster...I am a new subscriber. Your videos are excellent for us beginners. I have watched your oldest video first and have been working forward to your most recent video. I am looking forward to 2021 videos. I have already put your knowledge to use. In one video you mentioned keep away from company called NATURAL WHETSTONE company here in Arkansas, I had just ordered their Black Arkansas. You were right the stone compared to a DANS is o.k. but I also received a DANS Black and Translucent. DANS are much better stones no doubt. So I was getting ready order DMT diamond plates and saw your post on ULTRA SHARP. I ordered the 3 ultrasharp diamond plates. Thanks Gene Brown
@bamafaninky861
3 жыл бұрын
Gene I'm afraid your going to be waiting awhile. Rough Rooster has stopped making videos.
@kcb5150
3 жыл бұрын
I was thinking about those till some greenhorn who quit on trying to sharpen sold me an almost unused d8xx and d8x for nearly nothing given retail. Couldn't come soon enough, my coarse plates were dead and I was lifeboating on big old crystolons. The qc on the xx is not great imo, but the 8x is fine. I may relegate the xx just for lapping other things. They have been making dmt so long they should all leave in a good condition. I have a soft spot for eze laps, but I hate their wood base and the lip. The strangest feeling diamond plates made by someone with a name are probably the lansky ones. The feel is so inconsistent. They work but are so unprogressive in terms of feedback.
@chefboy2160
3 жыл бұрын
Get your hopes up! I have been using these Ultra Sharp stones for several years now and just love them. I actually bought a second set which I have yet to open but the price point is just to good to pass on.
@oceanwaves83
2 жыл бұрын
Where's the best place to buy some?
@rickwhitson2804
6 ай бұрын
I can't wait to get me some of those.
@MattSterShake
3 жыл бұрын
Would you reccommend the 2200 grit stone for use with pocket knives? I just picked up the 600 and 1200. They cut great but seems like the blade isnt cutting as smoothly as it should. Or might that just be part of the break in? I used an old stone to break them in like you show in this video.
@analogoutdoors
3 жыл бұрын
Yeah, they cut like crazy.
@inthemiddleof
2 жыл бұрын
Confirmed, I recently bought 7 dmt stones , 8x3 diasharps, 2 out of them have noticeable uncoated patches near edges. Still useable but frustrating to see. I really like venev stones, i have a several different sizes and grits, no issues of any kind.
@roughroosterknifesharpenin5531
2 жыл бұрын
There nice. But I refuse to pay the prices
@inthemiddleof
2 жыл бұрын
@@roughroosterknifesharpenin5531 agreed they are pricey. However they are two sided stones so technically not that more expensive than 2 dmts , also should last longer .
@roughroosterknifesharpenin5531
2 жыл бұрын
@@inthemiddleof I'd rather stick with my Arks and a 2 sided silicon carbide stone.
@inthemiddleof
2 жыл бұрын
@@roughroosterknifesharpenin5531 right on!
@roughroosterknifesharpenin5531
2 жыл бұрын
@@inthemiddleof I'm just not with the new stuff man. I stick with what I know works.
@solacita
2 жыл бұрын
Is it important to increase the angle as yo move to the tip? I have been assuming that I needed to try to keep it the same. But yours look great and clearly the angle changes as the stroke releases.
@roughroosterknifesharpenin5531
2 жыл бұрын
I don't change the angle of the blade I change the pitch.
@TheCrajiboi
3 жыл бұрын
im pretty sure the ultra sharp plates are courser than the dmt's - even though they have same grit rating, the micron sizes are a little different - dmt has their own grit rating but the ultra sharps follow the JIS - so even when they are completely broken in they will still be courser than the dmt counterparts - also i think ultra sharp also comes from china
@roughroosterknifesharpenin5531
3 жыл бұрын
I believe you are correct
@brad3741
3 жыл бұрын
I have both, and would say the Ultrasharp do seem more coarse.
@michaelshults7675
3 жыл бұрын
@@brad3741 How would you compare the dmt 1200 and 600 to the same grits as ultra sharp?
@michaelshults7675
3 жыл бұрын
So is the 600 now finishing like a 600? Sorry to ask tye question but for some reason I can't read all your reply to my last message. I click on it and my comment doesn't show up.. Thanks, Mike
@brad3741
3 жыл бұрын
@@michaelshults7675 It was close to the same as dmt. It is broken in now and seems close enough to 600 grit. But I can't really do a side by side comparison because my dmt 600 is pretty worn out at this point. With diamond plates if you want to you can just break them in with a random chunk of steel. Just keep going until it is cutting the way you want. My old dmt 325 cuts like it's 800 grit at this point.
@alankauth
Жыл бұрын
I have the same spot on my coarse "stone". It seems like a too large particle. I have not used mine yet. I hope mine breaks down some otherwise it will leave a scratch. I would not use it to flatten another wetstone due to the particles. I thought about hitting it with a screw driver tip.
@nightwalker2830
3 жыл бұрын
Welcome back bud been missing you hope all been going good for you and your family
@roughroosterknifesharpenin5531
3 жыл бұрын
It's been better.
@bamafaninky861
3 жыл бұрын
@@roughroosterknifesharpenin5531 Prayers for you as always.
@bushwacker2048
3 жыл бұрын
I'm curious, what don't you like about how the Atoma plates are set up? I bought a coupe of dmt continuous stones a while back and wasn't too impressed, and I'm looking to get some different continuous diamond stones.
@roughroosterknifesharpenin5531
3 жыл бұрын
Aroma is made in clusters. They catch edges. If you have a good set of dmt, and you aren't impressed with them then idk what to tell you
@jdisdetermined
6 ай бұрын
How did the diamonds hold up long term after years of use on these stones? My DMT plates are about dead so I'm thinking about trying these to replace them.
@roughroosterknifesharpenin5531
6 ай бұрын
They were very inconsistent and wore way to quickly. Stick to DMT man.
@jeffsmith6441
3 жыл бұрын
Hey man! It's been a while since I've been on KZitem but figured I'd swing by and say what's up. I have this same set and for the money they're awesome. One of my plates has a small spot that catches but I'm not going to complain for the price.
@dombond6515
3 жыл бұрын
U should ask for affiliate link. Give us a discount and u get a kickback. If u really like em. Good to see u back rioster
@ronaldowen5973
3 жыл бұрын
glad to see again and hope everything went OK with your new home.
@sharpwhits0167
3 жыл бұрын
I'm happy with my 600 grit so far. Feels a bit more course than my DMT 600 grit. But it also hasn't seen near the use my dmt 600 has. Glad to see you back. Hope all is well. You're still my boy, Blue. On behalf of your favorite acquaintance, hope you have a great Thanksgiving, Brother.
@nikolaisawyer2392
3 жыл бұрын
I dont mean to be so off topic but does any of you know a tool to get back into an Instagram account?? I was stupid forgot the login password. I would appreciate any help you can give me
@nasirsalvatore2184
3 жыл бұрын
@Nikolai Sawyer Instablaster ;)
@jeffreyelliott1000
Жыл бұрын
Do you still like them? Great videos
@andrewpedersen9502
3 жыл бұрын
Ordered some before I watched. So excited now! I thought you were dave ramsey for a second. Sound just like him haha.
@trollmcclure1884
3 жыл бұрын
I think you could see the pattern of scratches on a sacrificial flat glass. The high spots and even the flatness to some point
@nisamvise1724
Жыл бұрын
Are you going to be doing anymore videos?
@JasonSmith-bv3yd
3 жыл бұрын
I ordered a set of these that are 2 by 6.....what grit is the Arkansas stone your using to break in the diamond plates?? I was gonna use some sandpaper...
@roughroosterknifesharpenin5531
2 жыл бұрын
They don't go by grit.
@RobNC-OG
Жыл бұрын
Dude has a bed in his sharpening room so he can sharpen until he falls out then wake back up and get back at it!
@roughroosterknifesharpenin5531
Жыл бұрын
This was when I moved a couple years ago that was my spare bedroom AKA the junk room I now have my own shop
@RobNC-OG
Жыл бұрын
@@roughroosterknifesharpenin5531 You seem like a really honest good guy. I wish you nothing but happiness, health, and of course- great sharpening! Thank you for taking the time to show us about these stones. I'm ordering some.
@roughroosterknifesharpenin5531
Жыл бұрын
@@RobNC-OG I appreciate the kind words. They're pretty good set of stones I think you'll be pleased with them.
@williams.1130
Жыл бұрын
Curious what the conclusion is after long term use?
@alexanderbertallo1995
3 жыл бұрын
Thanks for sharing and keep up the great work.
@roughroosterknifesharpenin5531
3 жыл бұрын
Anytime
@timbo4374
3 жыл бұрын
I have this same set of stones, and I'm impressed with them. I think they are heads above DMT stones, or at least the ones they've been putting out recently. Better quality at a lower price is hard to argue against The only question I can't answer is how they hold up over time, because I've only had them a few months now. I guess time will tell, but so far so good.
@roughroosterknifesharpenin5531
2 жыл бұрын
I sold mine. They were to coarse
@Hollysetbuilders
3 жыл бұрын
Thanks for the review video. Very comprehensive & informative. Curious how you feel about them after using them for awhile
@roughroosterknifesharpenin5531
3 жыл бұрын
Don't care for them anymore. They are to. Coarse
@ΠαναγιωτηςΓκιωνης-ρ2η
3 жыл бұрын
good your back,missed your videos
@roughroosterknifesharpenin5531
3 жыл бұрын
Thanks
@collecter3456
3 жыл бұрын
Could you get a shaving sharp edge on a diamond stone if it is fine enough? I am glad my Smith’s diamond stone is still going strong.
@roughroosterknifesharpenin5531
3 жыл бұрын
Yes sir
@briandavis6813
3 жыл бұрын
What mic and camera do you use? With good headphones I can hear everything, in good stereo. Great and informative video, I guess I'm getting some of those plates!
@roughroosterknifesharpenin5531
3 жыл бұрын
I use a Motorola g7 supra phone for it all.
@andrewandmim
3 жыл бұрын
Hi from Australia - I love your videos! Have you continued using these stones since making this video? If so, what are your impressions now?
@roughroosterknifesharpenin5531
3 жыл бұрын
Hello, and no I have not.
@txbehemoth
3 жыл бұрын
@@roughroosterknifesharpenin5531 do you plan on using them more or have your opinions changed sinve the making of the video
@roughroosterknifesharpenin5531
3 жыл бұрын
Not really a fan of them. They are much coarser than what I'm used to. But they are great stones.
@Bob-od5ut
3 жыл бұрын
nice video could you please explain what you don´t like about the atomas, or if you already have in a viedeo link it thanks in advance
@jasonwilson4355
3 жыл бұрын
Hey just found your channel. Awesome. Was wondering if you would teach a class on knife sharping?
@roughroosterknifesharpenin5531
3 жыл бұрын
That's what this whole channel is about. Take a pick of a video
@petervu9773
3 жыл бұрын
Ultra Sharp are the bees knees ! Great customer service and very good quality; I also picked up the 2200 and 3000 grit plates just to have and love them. DMT is horrible I bought several plates from them and they were either pitted or peeled off; customer service is non existent - they took down my information and never called me back... I only have one DMT plate and thats the 8000 plate. I ordered my ultra sharps through bestsharpeningstones.com. Hope you enjoy the plates as much as I do ! I know you like your dawn soap and water, but I have GREAT results with the trend lapping fluid with these stones.. then again Im still new at sharpening and have always enjoyed your videos since day 1 !
@roughroosterknifesharpenin5531
3 жыл бұрын
I'm not going to continue using them. And I've heard of that fluid.
@bamafaninky861
3 жыл бұрын
@@roughroosterknifesharpenin5531 Care to share why your not using?
@Comey757
2 жыл бұрын
I saw in another comment that you got rid of these. Did they just never break in? Also, have you found any other diamonds that you like more than the DMTs? Thanks man, I enjoy the videos.
@roughroosterknifesharpenin5531
2 жыл бұрын
I think I actually gifted them to someone learning to sharpen. I can't remember. Just still using my old dmts. And thank you. Happy Thanksgiving
@SaltySeaDaddy
Жыл бұрын
Rooster! You gonna start making some more vids?
@roughroosterknifesharpenin5531
Жыл бұрын
Probably not
@SaltySeaDaddy
Жыл бұрын
@@roughroosterknifesharpenin5531 We wish you would. Love your content. Solid. Well worth the time. Hope you and yours are doing well. Staying true to the Arks on my straights & knives. Do know, you're always greatly appreciated.
@MrGodofwar666
3 жыл бұрын
hey chris, hope you are well, glad to see you posting again, hope the family is healthy too
@stevenlachance8576
3 жыл бұрын
Nice to see you are back, house settling down now, how about your “shop”?
@roughroosterknifesharpenin5531
3 жыл бұрын
No shop yet. But the house is still going good
@nolanharris4088
3 жыл бұрын
Good video keep it up and if u can can u do a knife collection and a stone collection please
@swamp.stomper
2 жыл бұрын
I was looking at these vs the cktg plates. These look decent
@anthonycapo1998
3 жыл бұрын
why don't you like atoma? i ask because im also looking for affordable diamond plates.
@roughroosterknifesharpenin5531
2 жыл бұрын
Ythey use clusters of diamonds. And there to high.
@michaelshults7675
3 жыл бұрын
Hey rooster updates on this brand?
@LeLilley1
3 жыл бұрын
What are you spraying on your "stone"?
@roughroosterknifesharpenin5531
3 жыл бұрын
Dawn and water
@6AxisSage
2 жыл бұрын
What happens if u break in a diamond plate using a diamond plate? Ok, so I just googled it, never break in a diamond plate with another diamond plate 😅
@roughroosterknifesharpenin5531
2 жыл бұрын
Yeah don't do that...
@jaylane82
3 жыл бұрын
You will have to let me know how you really like them after getting some time on them and a true feel for them bro.
@bamafaninky861
3 жыл бұрын
I've been using since April. I really like them.
@MrEric0822
3 жыл бұрын
Why are you soaking diamond stones like they are water stones, especially since you are spritzing them with soapy water. Seems like a lot of unnecessary mess and setup.
@dombond6515
3 жыл бұрын
They have a 3k diamond stone
@WHEY2GETFIT
3 жыл бұрын
Will this be good for m390 and s35vn steel?
@roughroosterknifesharpenin5531
3 жыл бұрын
Yes
@worich24
3 жыл бұрын
offffffff course you were told they were bought out by some "Chinese company" ... jesus this is getting old!!!
@roughroosterknifesharpenin5531
3 жыл бұрын
I don't understand what you're getting at?
@roughroosterknifesharpenin5531
3 жыл бұрын
So. What's getting old?
@bamafaninky861
3 жыл бұрын
Hey good to see you! First comment!
@roughroosterknifesharpenin5531
3 жыл бұрын
Thanks man. This is a video I made about 3 months ago. Just never uploaded it.
@bamafaninky861
3 жыл бұрын
Glad to see you with the Ultra Sharps. I guess I sold ya. 😁😁😁
Пікірлер: 145