I've been an ultrasound tech for 12 years. In case anyone was interested, 1: It looks to me as though something is wrong with his distance amplitude correction curve (the line on his screen) 2: He is scanning way too fast. 3: You can't find flaws if you're not looking at the screen. However, he could be an assistant that is getting training hours. But the level II NDT inspector that is supposed to be training him is not a very good teacher.
@ClimaxinspectionServices-ys2ni
3 ай бұрын
Dear NDT professional, Could you please provide suggestions for a method that is non-invasive or non-disruptive for inspecting pressure vessels while they are operational, without requiring a shutdown? I will be waiting in the comment session for your valuable suggestions and contributions.
@dreameater9247
3 ай бұрын
@@ClimaxinspectionServices-ys2ni Not sure exactly what you are trying to inspect on the pressure vessel. However, for many cases, (such as the circumferential and long seams) Phased Array Ultrasound can be used in lieu of Radiography as per ASME Code Case 2235. We perform TOFD inspections using Phased Array Ultrasonics. Check your codes and regulations first, of course. Hope that helps.
@kilow9220
Ай бұрын
you should definitely start a yt video going over this sort of career field there isn't a lot of information
@AdamWilson-mz8xq
11 күн бұрын
listen mate, i've been a UT technician for 13 years and i can assure you what he's doing is 100% correct.
@dreameater9247
11 күн бұрын
@@AdamWilson-mz8xq he’s not even looking at the screen half the time lol. If you’ve been performing UTS inspections for 13 years, that is very concerning..
@raxxx1000
Жыл бұрын
While moving probe, instead of looking at the screen he is focusing on probe movement 🤣🤣
@arabellanaaron824
7 ай бұрын
hahahaha exactly, he is missing everything.
@naughtymarco6375
3 ай бұрын
Not if he has peak memory on
@krishnaraokimmoji5120
Жыл бұрын
Maintain Scanning speed
@jondoe2467
Жыл бұрын
Incorrect raster technique. Adopt line scanning with set index offsets the conclude the exam with a raster scan.
@user-yv2gv1wy3x
10 ай бұрын
Just send in the X-ray crew
@macdonguines5049
Жыл бұрын
Now thats a quality weld
@gamerlike1017
Жыл бұрын
Not looking at screen while moving the probe
@ArielMampouya
3 ай бұрын
Magnifique.
@user-hm9jr4js3t
11 ай бұрын
This guy had no idea how to scan a weld
@veeen-y-cee2750
8 ай бұрын
Heeeeyyy Buddy....You have to "LOOK" at the screen while you're scanning!
@KaifMalik-vj1of
2 ай бұрын
Bhai ek puri video banao n UT ka
@piyushsengar914
25 күн бұрын
Very 👍👍👍 nice
@adeyuntitled358
28 күн бұрын
Welding accepted 😂
@jitendrakumaar755
Жыл бұрын
Speed 150 ki jagah 500mm/s ka bana rakha h........
@amarzn1832
Жыл бұрын
Agak laen model scaning encik ni , Hahahaha
@user-zm9sh7fz5d
10 ай бұрын
is it right direction of probe? i think he is scanning opposite
@Rawat957
9 ай бұрын
O bhai kaha sikha ye sb
@canadianamerican90
9 ай бұрын
and this is why we have cgsb certified people in canada . the skip distance on this is huge and he’s not even looking at the screen when scanning ! what is this pipe 1 foot in thickness ? i don’t even see a root indication or anything on that screen unreal !
@FrDxteam56
11 ай бұрын
Mai bhi NDT level 2 kar raha hu abhi mujhe PT MT Bahut achchha se kar leta hu mere liye koi job hai to bataeye please...... Mujhe job ki shakht jarurat hai..
@alejandrovarela1886
6 ай бұрын
The raster mark are ok the weld who knows
@ramkishoryadav8309
6 ай бұрын
Difect kaise pata chalta hai kaha hai
@parthmandalaywala7857
Жыл бұрын
He is moving his hand too fast.
@louism9790
Жыл бұрын
It's too fast for my procedure, possibly not for his though. I will say he's definitely not trying to find anything...
@crisruizal
Жыл бұрын
Good joker
@mindsetquotes6292
2 жыл бұрын
DAC kaise bna hua hai bhai
@ookisee
Жыл бұрын
Hes not on a standard how is he making a dac?
@adeyuntitled358
28 күн бұрын
No indication 😂
@omveerpal5061
Жыл бұрын
ye kya kar raha h ut to nahi hota h aise
@bernattv1432
4 ай бұрын
Daripada gitu mending Di RT aja
@hasirrangdhanu8905
Жыл бұрын
It's not UT, Something different
@parthmandalaywala7857
Жыл бұрын
Majak bana rakha hei ndt ka.
@allanxj6762
9 ай бұрын
😂😂😂😂😂
@ookisee
Жыл бұрын
Lol hes training
@chandrapaltomar3595
Жыл бұрын
Scanning galt he bhai
@cafemohammed8614
2 жыл бұрын
ndt
@nafeesalam8587
Жыл бұрын
Nice 👍
@andrewsenior229
9 ай бұрын
Not got a clue what he’s doing. He’s supposed to look at the screen not the probe😂😂
Пікірлер: 48