Before using an angle grinder you need to first familiarize yourself with all its features: these features include; cutting wheel/disk/blade, wheel guard, auxiliary handle, spindle lock button, vent, locking power switch and power cord.
Make sure you read the manual to familiarize yourself with the functions available and to identify all important features. Kindly ensure that grinder safety is put first. The following angle grinder safety precautions will be of great beneficial when using the machine.
Make sure you wear goggles, protective boots, dust mask, and gloves
When changing wheels unplug the grinder
Attach handles to the grinder
Hold the grinder firmly whenever you are using it
For new wheels make sure you run them in a protected area to ensure that it is not defective.
Flammable materials should be kept away from sparks
Ensure that the wheel is spinning away from you at all times
Secure workplaces wherever possible
Step 1. Choosing the right grinder type for your project
There are different types of disks. You should choose a disk that is best for the work you want to do. Kindly, do not use a disk for a purpose that it is not intended for. For grinding concrete and metal use grinding disk.
Step 2. Choose the proper discs
For grinding concrete and metal use grinding disk. For polishing works, use polishing pads and sanding disk. Forcutting metal sheets, pipe, tile, masonry, and wire use a cutting disk. To remove rust and paint use brushing wheels.
Step 3. Read Manufacturer's manual
Before using a grinder carefully read the manufacturers manual and make sure you understand the manual well and carefully follow the instructions.
Step 4. Clamp your work on a stable surface
Secure the guard properly and make sure that you clamp whatever you are working on firmly on a steady surface.
Step 5. Against the body of your work, hold the grinder with a firm grip
Do not hold your grinder on the edge of your work but rather hold it firmly against the body of your work. You can now turn the angle grinder on and use it.
To avoid the grinder slipping and causing you an injury, hold the grinder across the body of your work in the direction of the handle.
Step 6. Switch Off After Completion of Job
After completing grinding, lift your grinder slowly and gently off the surface of your work and switch it off.
Click here to Buy Now: www.gz-supplie...
Click here to Buy Now: www.gz-supplie...
Click here to Buy Now: www.gz-supplie...
Click here to Buy Now: www.gz-supplie...
Негізгі бет unboxing and how to couple INGCO angle grinder AG24008
Пікірлер: 7