The only hero I see are these dang reviews from Dstar!
@DriftSpaceZero
3 жыл бұрын
@6:20 If you're having problem with the feet staying on: try flipping the double ball (ankle) joint around. I am not personally having a problem with the feet staying on, and I think it's because the ankle joint has a specific orientation; there's a foot side and a leg side to that double ball joint, even though the part looks symmetrical. This is one of many things I don't like about Kotobukiya models; they occasionally make parts which appear symmetrical, but are just asymmetrical enough that the model doesn't fit together quite right if not properly oriented, and it can sometimes be difficult to discern the asymmetry of those parts.
@tbferry6424
2 жыл бұрын
This is not work :(
@ukatosp1953
2 жыл бұрын
Just bought this model kit and I came here to thank you for the review, btw I believe the reason why the foot is falling off easily is because the ball joint has an specific orientation, it can be put backwards hence why the foot detached easily, you're supposed to put the ball with the longer "arm" in the foot socket while the one with the smaller arm goes to the rest of the leg, I originally put it backwards and the foot detached extremely easily, thanks to this review I put special attention while assembling the whole legs
@BoArtTakeOver
3 жыл бұрын
Crazy, I actually had the first review of this figure out but I had no idea about the light trick, and promptly bought me some hiromi 316B lights. Thanks for the review!
@blacksoldier430
2 жыл бұрын
Thanks a lot, I’ve been searching for a scale comparison with other figures and non of the reviews I watched had it, it was the only thing I needed to finally buy one and have it in hand it’s awesome, thanks for this review
@Isahorta
2 жыл бұрын
2:16 the same thing happens to me with my figures, for example: my transformers studio series blurr couldn’t stand up straight and I used the accessories to kinda balance it and I ended up being able to pose it!
@janraymondjulian1273
3 жыл бұрын
He's even more easier than those previous model kit X. I give them credit. Also the joints are new. Why they screwed here are the feet. The joints loves to pop off every time I pose mine. So what I did is I hot glued the joints.
@123hyouretsuzan5
3 жыл бұрын
Lol, you just need to drill a hole in there and connect 2 part with a metal stick, glue makes your model kit can't move.
@janraymondjulian1273
3 жыл бұрын
@@123hyouretsuzan5 I saw someone do that. However I'm not gonna damage an expensive kit. 😅 I guess I'll stick with glue.
@123hyouretsuzan5
3 жыл бұрын
@@janraymondjulian1273 not at all, the hole is inside the foot so you don't see a single scratch from outside. I did it to my model kit and it worked very well, no scratches. And i still can move the feet.
@Zhane-xs5sj
2 жыл бұрын
Think you could give the X from the kotobokia model Kit one of Zero’s hands and make him do the scene from X5 where he is running with the saber
@kaiser8773
3 жыл бұрын
What i am saving foooooor?!! This model kit,
@Bossitronio-my2co
3 жыл бұрын
dear lord X4's voice acting was horrendous lol, but maverick hunter x (x1 remake) did it perfectly
@redreploid1713
2 жыл бұрын
I don’t know if i got lucky or if they changed the models, but both my X and Zero don’t have the feet and arm issues, they’re completely solid
@BerserkerDre
2 жыл бұрын
I loooove these kit figures, I used to have the D-Arts Zero and I must say this is so much better in terms of posability, not just that the D-Arts while gorgeous looking is way too fragile. Btw mine does stand up straight
@kaienjin5468
Жыл бұрын
I have the same issue with my D Arts Zero. He looks amazing but one of the Saber hilts broke like 3 times now.
@321letsjam6
3 жыл бұрын
I think the instructions said to insert the ball joint with the longer neck into the foot, swap it around and put the shorter neck and that joint holds in much better. It was pissing me off too but for some reason switching it held up amazing.
@Sigma0283
3 ай бұрын
They really should do a release of how Zero originally looked from Mega Man X1 before he was rebuilt in Mega Man X2.
@Riky366135
3 жыл бұрын
When I first saw the prototype I instantly disliked the hair. But later on it grew on me. I'm really glad I picked him up.
@Aeragon
3 жыл бұрын
Theme Music for the reviewed figure is back! I prefer that to the same music for everyone
@Rockman555
2 жыл бұрын
I need to start collecting these
@kaienjin5468
Жыл бұрын
I'm totally getting Kotobukiya Zero. While I prefer the way D-Arts looks, this one seems way better in every other department.
@lkmaxis2678
3 жыл бұрын
Little tip from gundam building and shf android 21 problems. When the ball and socket is loose, cover the ball in super glue and let it dry. It makes a thicker ball
@123hyouretsuzan5
3 жыл бұрын
The problem is that the other part is not wide enough to wrap the ball, if you glue the ball, it'd get even worse. The best solution is to drill holes in 2 parts and connect them with a little metal stick.
@lkmaxis2678
3 жыл бұрын
@@123hyouretsuzan5 Now that is just dumb design. Guess I'll see when I get one. Koto kits are really iffy, if mechagaikotsu's white glint review is anything to go by.
@123hyouretsuzan5
3 жыл бұрын
@@lkmaxis2678 The price is a little high but not so well design. The only reason i buy this line is just because they sculpt characters better than Bandai and Sentinel.
@Den8075
Жыл бұрын
how big is the height difference of this compared to the eastern model zero? thanks!
@Sonicfan5150
3 жыл бұрын
It's really unfortunate that my neck piece snapped in half with this one. Beware of pulling the hair too hard which is how it snapped off. Glue and Tape didn't work to well (not enough surface area) and I'm thinking of getting Mounting Putty but I don't know how good it would work. I might be better off coughing up the money to get D-Arts Zero.
@bbiswannabe2396
3 жыл бұрын
when is demoniacal fit Goku black going to be restocked? looks nice for the price
@bernardlau7813
3 жыл бұрын
Is it hard to build
@dstar01
3 жыл бұрын
No
@--medditrainianlinersrblx-15
3 жыл бұрын
O:01 From Zero to Hero thats his name Zero The Hero
@charlyguendulain8972
9 ай бұрын
I don’t know what I did with mine, but my model is able to stand normally on itself
@jaydongYT
3 жыл бұрын
Let’s get him in smash bros
@ScarletKirisame
3 жыл бұрын
But he’s a Assist Trophy Already
@zeenguyen4619
3 жыл бұрын
Dstars you got any DBZ vegeta blue and Vegito Blue heads that you sale?
@zorathehedgehog6341
3 жыл бұрын
ok if you get the nightmare zero give me a heads up
@hikikomorij1229
3 жыл бұрын
what to do if youre missing one of the ear parts?? please help =(
@ColeFam
3 жыл бұрын
Zero is a great kit. Are you gonna do Nightmare Zero later on?
@dstar01
3 жыл бұрын
Yes
@ColeFam
3 жыл бұрын
@@dstar01 Alright! There really isn't much coverage of him on KZitem, so I'm looking forward to seeing it!
@jay_skii2634
3 жыл бұрын
Hey dstar do you know how to fix paint on sh figuarts mostly on the best selection naruto love the content I wanna be just like you when I grow up😁😁😁
@greatape2270
3 жыл бұрын
Do you review picolo sh figuarts 2.0?
@Bossitronio-my2co
3 жыл бұрын
hey can you reply what type of lights those were?
@dellabrown528
2 жыл бұрын
Bro I want that
@user-gu3qr5hk6k
2 жыл бұрын
is this repainted
@Yami.to29
3 жыл бұрын
I'm forth to comment😂😂😂
@10cboi63
3 жыл бұрын
I really like this kit but the hair is so cheap! come on! kotobukiya!
Пікірлер: 52