As someone who is currently working on a 350 Enterprise with the old lighting kit, I do like the fact that you get better connectors for the LED strips, a switch for the kit, and the better instructions with diagrams of the wires. The old kit does have the power adaptor, something that surprised me when I opened it first as I presumed it would be battery operated. EDIT: My lighting kit did have a problem. When I checked it at first, the motors worked but none of the lights did. Turns out that something had been wired wrong in the kit. I needed to reverse the main power wires so that the red wire from the kit was joined to the black wire from the power supply, and the black kit wire was joined to the red power wire. Once I had done that, all the lights came on. When I checked against TV footage, my motors had originally been turning backwards.
@michaelbenjmitchell1
2 жыл бұрын
If the lights had worked the first time that would have been a cool effect.
@michaelbenjmitchell1
2 жыл бұрын
On top of that if you don't want to use the strips PL provides you can change them out for the ones with the color ranges you want to use.
@johnblack9885
3 жыл бұрын
I really hope they update the K’tinga light kit. The main issie I have is that the forward and aft photon torpedo bays are always “on.” Would be nice to have activation switches to make them pulse on and off. Don’t want to buy an expensive aftermarket lighting kit that requires soldering.
@russellmorash3816
Жыл бұрын
The original did come with a power supply it did not have a switch the soliderless connections where terrible they often would make contact then the circut would come apart loosing a large chain i ended up soildering my connection even without the shuttle bay the rear of the ship barely fit a great deal of work with a dremel tool was needed and the bassard lighting was a great idea bur only one of mine flashed roung 2 sent me 4 diffrent boards none of them lasted and eventually the one that worked quit on me the motors where loud but are still working and the lights that are on at all times continued to work i love my model but i did a very good job on it i wish this lighting kit was available 12 years ago
@spacemanreviews8468
2 жыл бұрын
Just got this lighting kit! Can't wait to start building
@robertd1965
3 жыл бұрын
Dude.. your models and lighting set ups are cinematic quality. Beautiful work.
@LeMondeDeJudge
3 жыл бұрын
I said it on the previous upload but this kit seems much better than that of the DiscoPrise which the latter was disappointing for me.
@davidjames1389
3 жыл бұрын
Yeah it's kinda baffling to me why they didn't just use strip lights for much of the interior lighting instead of the dozens of LEDs with fat wires that you had to jam into the model.
@iceniwargames6347
3 жыл бұрын
I hope they do more of these lighting kits, I would have loved one for the new clear voyager.
@PunkyWily
3 жыл бұрын
Well good luck on the build, that 1/350 is going to be a lot of fun! You'll have to try the 1/350 refit next, working on her now and having a blast.
@nathanstenabaugh1290
3 жыл бұрын
I wish they made a basic lighting kit for the refit
@PunkyWily
3 жыл бұрын
@@nathanstenabaugh1290 I heard a rumor that they were going to do just that but never did. And building this thing right now I can understand why, its sadly not really engineered for it. So little room to put standard 2 mm LEDs.
@nathanstenabaugh1290
3 жыл бұрын
@@PunkyWily true but I’ve developed a bit of hand shake that make simpler kits like the new polar light 350 kit ideal. It’s not ideal to pay 8 times more to get something into Canada that also requires a lot of soldering and even more kit modifications. And cobbling something together from scratch isn’t usually ideal for similar reasons.
@tomlake2732
2 жыл бұрын
You don't lay the LED strip down before closing the connector. You slide it in under the two tiny tabs.
@thestorm99
3 жыл бұрын
I owned the Master Replicas Studio Scale Enterprise and absolutely loved it for the short time it worked. The impeller fans inside the nacelles stopped spinning first, then the sequenced lights went out. At that point, I sold it. I have the PL 350 and the old lighting kit but now that I see that they've improved the lighting kit, I'm glad I haven't had time to build it. Looking forward to watching your progress. I'm especially interested to see if they, indeed, sequenced the nacelle lights, as they flash in a very specific order on the original filming model, which MR replicated using colored LEDs, not the "Christmas lights" the new lighting kit supplies... which is (obviously) more accurate to the original.
@stevesstuff1450
2 жыл бұрын
Here's hoping the videos on the new Discovery Enterprise kit with the aztec masking is coming soon!..... Mind you, I still have to catch up on these 1/350 TOS Enterprise videos yet!! :-D
@michaelbenjmitchell1
2 жыл бұрын
I want to get the lighting kit for my Disco enterprise. I got my enterprise pretty cheap last month for $45 and it came with a PL 1/1000 Refit with battle damage decals.
@Salty_Balls
3 жыл бұрын
I'm skeptical of any motors being in the nacelles after building the DiscoPrise and having my LEDs burn out from the heat generated by the motors. I left mine on after putting it together, only to find my lights were toast. Killed the lights in the collectors beside the motors and also killed the first light in the blue warp grill because it got hot too. After breaking it apart, I found the motors had gotten hot enough to distort the plastic piece that connects the clear fan piece to the front of the motor. I contacted PL and they graciously resolved the issues for me. But basically the kit was done for. So be advised of motors anywhere close to LEDs that can't be ventilated to cooler air. I would rather be able to enjoy the lights for an extended time then have to enjoy it for a brief time and have to turn it off to prevent damage.
@davidjames1389
3 жыл бұрын
Good to know, thanks. I only ended up using the motors from that kit, with the rest being my own lighting. But I still only run them for maybe a minute at a time as it makes me nervous keeping them going any longer than that.
@Salty_Balls
3 жыл бұрын
@@davidjames1389 I'm not sure on how much the average user runs their kit, but I planned on putting mine onto a switched receptacle with others on display and running it quite a bit. I was very depressed after building and painting the thing, only to have it run beside me the next day for 8 to 9 hours on the desk and then realize.... something isn't right when I glanced at it. Then my electrician brain (really) kicked in and I reasoned out the cause. It was something I didn't even acknowledge during the build. LEDs don't like heat, and those nacelles got very warm. I'm building another and have excluded the motors this time. BTW, credit to PL for making it right. Good customer service.
@fernbatfink4851
3 жыл бұрын
Looks great love watching you how you explain everything. And build s .great job
@brookestephen
3 жыл бұрын
I find those lights are really bright even to beings our size... imagine how bright they are to the ppl inside the ship... probably like an easy bake over in there, cooking the crew lol
@nathanwilkins3039
3 жыл бұрын
I’m excited for the new kit. The nacelle motors are supposed to be much quieter.
@LoneBrowncoat
2 жыл бұрын
Anything is better than what one got from Paul M. (Half)wit Newwitt in the 1980s.
@howardrice9527
3 жыл бұрын
Nice job THX for showing us.
@sabermaster2000
3 жыл бұрын
Are the motors in the nacelles any quieter than the previous version? It amazed me how loud the previous motors were. I think the tube of the nacelle amplified the sound.
@matheww19
3 жыл бұрын
This and the dimness of the port and starboard red/green flashers were my biggest issues with the original kit as well. You can barely see them unless you’re in a dark room. The power switch is a nice touch, and I like that the addressed the shuttle bay lighting issues, but I’m really curious about the motor sound and flashers as well.
@acterene1
2 жыл бұрын
Thanks!
@slighter
3 жыл бұрын
It still says Constellation Class on the Box art. I really hope they change that at some time.
@3ccdmike
2 жыл бұрын
Polar Lights actually calls them "fans" but there is no fans on the kit, it has rotor domes.
@michaelbenjmitchell1
2 жыл бұрын
Fans has a better ring to it than rotary domes.
@Lino-zd4ft
2 жыл бұрын
Great videos !!! I'm doing research on 1/350 Enterprise kits available. Can you tell me if the lighting kit can be used on other PL versions of the Enterprise ? Ex. Pilot or refit ? Or are there other light kits like this one by polar lights that are available for the other versions ? Thank you !! Again , great videos !!!
@GrimCW
2 жыл бұрын
Only issues I have had with this light kit so far, is the connectors for the little led strip pieces are garbage. They either don't connect fully or fluctuate... Ending up just soldering them all together after cutting the connectors off. Got tired of having to reopen the saucer to adjust the things only to have them do it again and again :/ That aside so far just sad the bridge lighting is yellow rather than white.
@dashrendar655
5 ай бұрын
Bonjour, Est-ce que le chargeur accepte du 220volts? Et quel est le prix que vous conseillez pour ce kit d'éclairage s(il vous plait ?
@slighter
3 жыл бұрын
What is different to the previous upload of this video? Did you add something?
@allscaletrek
3 жыл бұрын
If you watched the first upload you wouldn't need to watch this one, I doubt anyone would notice what I changed.
@slighter
3 жыл бұрын
@@allscaletrek I remember one part where you started a sentence twice. But thats probably not it, right? ;)
@allscaletrek
3 жыл бұрын
@@slighter I'm sure that's still there
@onixfieroandscalemodelworks
3 жыл бұрын
Is this available for purchase now?
@chriswsmith1
3 жыл бұрын
Is this kit available for purchase yet?
@chrism023
2 жыл бұрын
Where are you buying these things from?
@saintpatrick7673
2 жыл бұрын
How do you get the lighting kit?
@ernestgalvan9037
3 жыл бұрын
A link to kit would be appreciated. Kit # also.
@muursnorthwestamexem8581
Жыл бұрын
How many more ships they have like this with lights etc
Пікірлер: 45