Thanks Roger! I would have been lost without this video!
@Toryo213
Жыл бұрын
Good job Roger no exact science to these things yet gotta rely on the community 👍
@freestyler7
Жыл бұрын
I admire your patience and persistence! It seems that master style boards require you to keep the power button pressed in order to keep the wheel on. Be sure to check the power connector for brown outs caused by sparks. I have an anti spark cable that I use for this reason.
@mahdihosseini6361
Жыл бұрын
THANK YOU SO MUCH THIS VIDEO HELPED ME RIGHT NOW
@coolhawk2003
Жыл бұрын
Cool stuff
@FinnBjerke
Жыл бұрын
Roger u bloody well rule.
@dantemarcos1410
Жыл бұрын
Roger that!😂
@Simonisms
Жыл бұрын
How on earth did you come up with this fix? You're a wheel wizard for sure 🧙♂️
@ElectricUnicycles
Жыл бұрын
Very nice. I need to find the deep dark forum that you're hanging out in to find out about this stuff 🙂
@roghaj
Жыл бұрын
Stumbled across it while doing some human trafficking.
@floatypiet
11 ай бұрын
Thank you so so so much Roger! I had the problem with my T4 today. I'm able to go to 100% but the light won't turn on when I get to 100% 🤔 so I still can't turn in my wheel
@MC-qj2zd
Жыл бұрын
My friend holds down the lift button the whole time starting before the update and after it finishes.. and it worked for him 🤷
@electricunicycleadventures6386
Жыл бұрын
Mine was getting 1 % for awhile then I closed every other app on my phone tried again and it went through just by holding the power button. I don't believe you need to tap the other button.
@slydogracing
Жыл бұрын
Roger! I literally have a S22 and bought a Master just because your videos are so Awesome! Watching you rip on your Master made me pull the trigger. My problem is I get it today and the suspension is pure garbage please pretty please explain to me what you have done to yours to make it so smooth. I am 220 and mine just bottoms out and has no compression dampening. Thanks in Advance for your time
@roghaj
Жыл бұрын
Thanks a million. Makes me feel awesome. I really do love the wheel. Here is a video where I explain the suspension stuff. kzitem.info/news/bejne/qH2Qypdva6Nmo5w
@slydogracing
Жыл бұрын
@@roghaj You da man! Thank You Thank You at the beginning of the video you literally took the words out of my mouth. I suggest a name change "Roger EUC Wizard" seriously Thanks Again
@ZuberEUC
Жыл бұрын
I think EUC World, now puts the Master into "flash mode" automatically when you update firmware to the Freestyle custom firmware?
@roghaj
Жыл бұрын
This only becomes an issue if the flash fails. Once your wheel is bricked, it will not accept an incoming firmware request. That’s when you need to put the main board into boot loader mode.
@stevescott5858
Жыл бұрын
I just received my MP pro v2, should I even attempt to update the firmware?
@CrunchyTire
Жыл бұрын
Any chance you have the Master linkage arms or whatever they're called to sell during martys tour? I like my shock but Im looking for the option to change it out and need those custom mount bracket. 😀
@roghaj
Жыл бұрын
I’ll try to throw a few in my car for Friday.
@CrunchyTire
Жыл бұрын
@@roghaj that would be amazing thanks!
@X_iCjay
Жыл бұрын
User error?
@yeahbuddy6852
Жыл бұрын
Maybe Begode should do a (how to video them self) ?
@roghaj
Жыл бұрын
They should. They won't
@Papalou1234
Жыл бұрын
Hey Roger you said you have to discharged the caps but when you unplug the power you did not press power to discharged the caps 🤣
@roghaj
Жыл бұрын
I would assume that was while the headlight was on. It would almost instantly discharge the capacitors.
@Hunter_Heart
Жыл бұрын
So, your buddy connecting to the app, therefore you couldn't make the proper connection through your phone's bluetooth. He completely closed the app, then you press and hold the power button (right button, power) to get into the bootloader to flash the new firmware.
@roghaj
Жыл бұрын
Actually the steps were different than the master. On the master, you don't hold the last button. It would just beep. You know you're good. With the master pro, I was just looking at the screen and it was starting the firmware update without me hitting a button on the phone. I was so happy I fixed Josh's wheel. He is a nice guy.
@Hunter_Heart
Жыл бұрын
@@roghaj Good thing you found a solution and its recorded on KZitem. This would benefit future owners of MP if they ever run into this problem. Begode should give proper instuction incase we need to get into the bootloader to flash a new firmware. Are you going to put its through its paces?
@meriwald1329
Жыл бұрын
🤦 If anyone has this problem and wheel won't accept the new firmware - this random clicking and metling connector pins with connecting/disconnecting it million times is not going to help. There is a correct procedure for entering that mode. Text me on telegram if someone needs help. Same username
@torion29able
3 ай бұрын
What is it...I just bricked mine tonight smh
@gialongtonthat5404
21 күн бұрын
what’s the procedure?
@omidel.
Жыл бұрын
Why did you reupload?.same 🪅sound at the end..
@roghaj
Жыл бұрын
I was missing the intro on the other one. People were asking why I was doing this and I was confused. Did not realize the intro was gone.
Пікірлер: 36