Under $10 Saito 180 gasoline conversion 2 of 2
This is my very old Saito F A 180 4 c engine that I had from late 1999 and was running on glow for some years and was sitting in my garage for about 10 years so i decided to clean it up and convert it to a gasoline ignition motor . I had to change the bearings and clean the whole thing before setting it up for gas . I also used my very old ignition from the late 80s which i didn't have any info or instruction or even know where it is from. All i know is that it was made in Quebec , the walbro carb is from my 10 years old 25 cc weed wacker . The cost of under $10.00 is the cost of the aluminum adapter , Teflon and the timing strap and JB epoxy . The prop is an APC wide 18 x 6 that turns about 7900 - 8000 RPM , it also turns the APC 16 x 10 at 8600 RPM , fuel mix is 25 to 1 and it seems it's lubed all around .
Негізгі бет Under $10 Saito 180 gasoline conversion 2 of 2
Пікірлер: 5