Part 2 of this video surrounding the microswitch at the back of the HL or Taigen gun/recoil unit. If using IR this microswitch is not the best due to the delay it takes for it to be activated. If using IR or in particular upgrading to a servo recoil mechanism the micro becomes a problem and best replaced. This can be done with a relay or now on the MAKO2018 board - the microswitch replicator connection. If using the replicator it is now suggested that you trigger MAKO from the "Gun Motor" return on the 8 pin connector. MAKO2018 has a resistor to cope with the new trigger point.
- Күн бұрын
Understanding the Heng Long & Taigen MFUs - Part 2
- Рет қаралды 3,109
Пікірлер: 1