I didn't believe this would work. I tried it and it actually made a difference! Stock my card was mostly running at 1695 Mhz, now it can sustain 1890 Mhz. Running quite cool at 77°C with the stock cooler. Awesome! Thanks m8!
@infinitespace239
Жыл бұрын
Try different setting, lover or rise a little settings until it works stabile.
@christianserra1028
3 жыл бұрын
After going crazy looking for solutions ... I finally found it with you !!! I use a 3080 ti and lower about 10 degrees of heat thank you very much
@proluc2117
3 жыл бұрын
Your UV setting works nice on my 3090 Trinity. Thank you! 👍
@infinitespace239
3 жыл бұрын
Happy that it can help you.
@T.K.9
2 жыл бұрын
Thanks a lot! Followed step by step and tamed an RTX 3080 Trinity =) With it compared to a much quieter RTX 3070 Suprim. I gained 20-25 fps more on 4K depending on which game. Which is what I wanted! mine worked best at 875 mV, 1950 MHz. Definitely ran cooler as it wasn't as loud vs Stock settings. With the voltage monitoring turned on. It also was indeed using 875 mV max and would boost to 1950Mhz before that nope, with stock settings it went as high as 950 mV and the clock speed would drop to 1770 MHz simultaneously while being too loud and running hot.
@RocketLR
3 жыл бұрын
holy hell, I did not know that you could just adjust ONE point then hit apply.. Nice.
@massimomassimo9388
3 жыл бұрын
Thank you very much for your guide! I used your settings to undervolting my Zotac RTX 3090 Trinity OC ( considering that this version is just overclocked ). With an EKWB custom loop i get 20097 point on 3DMark's Graphics Score ( TimeSpy ). Great Work!!
@lucajensen5559
3 жыл бұрын
instablaster
@andrewr.9281
10 ай бұрын
This finally gave me a solution to my problem! Well-made detailed video. Thanks.
@infinitespace239
10 ай бұрын
Glad it helped you 😊
@lewmaca
3 жыл бұрын
Thank you so much, it worked perfectly on my RTX 3080 👌🏼
@infinitespace239
3 жыл бұрын
Congratulations :D
@ubyunet
2 жыл бұрын
Works well on my RTX 3090, thanks for sharing
@mongosaqqara
2 жыл бұрын
I have been messing with my 3090 for a while...this video made it so simple...I scored a 20 786 after tuning...I9-10900k, EVGA Rtx 3090 FTW# ultra, Corsair Vengence LPX 32GB 3200 DDR4, MSI Z490 Gaming Carbon, EVGA 1000W 80+ gold, Corsair H150i RGB PRO CPU cooler, Corsaire 4000D Case...runs much cooler was 80c plus now mid 50s on temp...190 FPS!!! 1440p Thank you!
@infinitespace239
2 жыл бұрын
Glad to help you, amazing PC by the way :D
@sethrader8749
2 жыл бұрын
I have same 3090 graphics card, did u use his setting or make your own running and if you did you own what did u use?
@mongosaqqara
2 жыл бұрын
@@sethrader8749 I used the same as video...875-1950 i think...I tried to increase but crashed so I left it...Im no expert and cant afford to fry any expensive pc parts....yea ita a beast...running cyberpunk 100-130 fps...at 60c max...looks great.
@sethrader8749
2 жыл бұрын
@@mongosaqqara you running cyberpunk at max settings?? Any dlss or anything?
@sethrader8749
2 жыл бұрын
@@mongosaqqara very strange with my card it crashes at that setting might have to try lower
@wintgaming.6789
2 жыл бұрын
thanks so much bro :) really usefull vid :) keep up the good work!
@motiongraphicsnz
2 жыл бұрын
Thanks man, very well explained.
@AA-yi2ip
3 жыл бұрын
I Did the same and I got amazing results with my zotac ,this deserves more view and likes , Thank you so much. one question thou , why does my power limit cant go above 0 When I did the same thing you did ? is it just a bug in the msi burner software?
@infinitespace239
3 жыл бұрын
Thank you, maybe it is a bug, try reinstalling msi afterburner and also update to latest drivers.
@AA-yi2ip
3 жыл бұрын
@@infinitespace239 It was msi afterbutner software bug , now I am just enjoying the performance im getting Thanks to you.
@Mochi-yo1wy
3 жыл бұрын
at last i been waiting for, did you flash any bios or just use zotac current bios
@infinitespace239
3 жыл бұрын
Just a ZOTAC bios no flashing at all.
@MacoLagames
11 ай бұрын
Does MSI afterburner needs to be running in order for undervoltage to be active, or not?
@infinitespace239
11 ай бұрын
If You setup run on start it doesn't, it automatically applies the numbers.
@seadoorsliveaboardphilippi3920
3 жыл бұрын
Hi, I got some games not stable like SC played in VR.. What setting should I lower first ?
@ryh.6984
3 жыл бұрын
I love this video and how straight to the point it is.. keep it up...but what do you use for testing and what do you look out for to know If it is stable or not stable?? Currently have the 3090 Founders edition.. so trying to get the most performance with the least amount of volts.
@infinitespace239
3 жыл бұрын
Thanks, I use 3DMark for all my benchmarks and stress testing. But you can find any other that works even basic ones will be fine. beebom.com/best-tools-stress-test-gpu/ Good luck with your new GPU
@marcogalliani279
2 жыл бұрын
Thanks for the video, very interesting 👍. What are the tests to do to understand if the undervolt I made works well? Thanks for the reply.
@infinitespace239
2 жыл бұрын
You can observe it in gaming, graphic card will be quieter and not so warm, also you can run some benchmarks like 3dMark
@marcogalliani279
2 жыл бұрын
@@infinitespace239 thank you very much! I tried and my Zotac Rtx 3080 Trinity OC hit 1935 mhz. and max temp. is 68 C. Fan now are very quiet. Thank you again!👍👋
@hardcoregamningchannel
11 ай бұрын
Thank you!
@seansean8008
2 жыл бұрын
To make sure I understand, once you set the undervolt, you only manually overclock the memory and not the core clock?
@infinitespace239
2 жыл бұрын
Yes, core clock does it automatically.
@seansean8008
2 жыл бұрын
@@infinitespace239 awesome, thank you !
@SpartanDeluxe
Жыл бұрын
Isn't it better for smoother clocking / less stuttering to flatten the curve until it hits the mv Sweetspot? Cause of the steep curve at the beginning, it immediately downclocks bit much, when less voltage is needed. Won't lead to very smooth gaming in reality... I actually do it the other way around, even though much more hassle: Take the stock curve around the wanted Mhz Threshold and after sweetspot, i put manually every dot entry down and hit apply.
@infinitespace239
Жыл бұрын
Well I am using it like this for 2 years, very satisfied with it. No stuttering.
@Mako-sz4qr
3 жыл бұрын
Great video thanks ! Does the Vram temps come down too? My 3090 hovers around 90-96c while gaming. Thanks !
@infinitespace239
3 жыл бұрын
Thank you. Not to much 90-95, mining - 98 - 102
@MyKillyy
2 жыл бұрын
@@infinitespace239 is that still ok temps? Seems crazy high to me
@infinitespace239
2 жыл бұрын
@@MyKillyy Well after 1 and half year everything is alright, stock temps are even higher.
@yanuarkurniawan701
Жыл бұрын
Tx bro...but i'm still confused how to show VOLTAGE/FREQUENCY EDITOR in display, please help me....forgive me cos i'm still amateur😅
@infinitespace239
Жыл бұрын
Nothing to forgive. Thank you for watching. Try slowing down the video and you will get it. Pres ctrl and F and it will open the graph.
@g.k61
3 жыл бұрын
Hey thanks for the video. Question: im undervolting my 3090. I set it to 1800mhz at 0.8volts. Things is sometimes the profile goes up to 1815mhz or even 1830mhz... it’s stable and I can play normally. Others, it goes down only 15mhz to 1785. Playing or not this happens. Even if I load the profile again. Why could that be?
@infinitespace239
3 жыл бұрын
Thank you. That is because RTX 3090 are doing so to speak self overclock. with lower temperature of gpu there is more space for overclocking, that is why you get better fps when undervolting your GPU.
@sofyo2bib
Жыл бұрын
when you reached 70C gpu down clock by 15mhz
@lefourbe5596
3 жыл бұрын
exactly what i needed :D thx u ! since I game and mine on my RTX 3090 TRINITY. Firestorm is good but i can't undervolt. instead i put my card at 80% power draw and that won't hurt my hashrate. But the core the voltage and clock are unstable with this settings (shift to 0,719 to 0,86V and the core clock is a permanent mess)
@antest3000
3 жыл бұрын
if you observe his video ,his core clock is jumping up and down too
@teku0000
2 жыл бұрын
I did a .875mv with 1860MHZ but it sometimes jumps to 1875MHZ, is this okay? Is it just the gpu trying to self overclock cause theres thermal headroom?
@infinitespace239
2 жыл бұрын
Yeah. That is ok.
@teku0000
2 жыл бұрын
@@infinitespace239 Okay thank you, I got the same GPU as you do, the 3090 Trinity
@hom3r
Жыл бұрын
I realize +500mhz memory above like doesn’t add much fps or value. How far can your core clock goes?
@infinitespace239
Жыл бұрын
Untill 1000. For me works stabile at 750 after a lot of testing.
@kreemk0rn118
3 жыл бұрын
thanks so much. subscribed!
@infinitespace239
3 жыл бұрын
Thank you for support.
@CallMeAstro
Жыл бұрын
How much faster is it compared to top of the line 3080?
@infinitespace239
Жыл бұрын
Cant really tell you I don t have 3080. Don t think it is too much. I wanted 3080, but could not get it so I went for 3090.
@aboodyq431
3 жыл бұрын
شكراً 🙏 thanks From saudi arbia
@infinitespace239
3 жыл бұрын
Thank you greetings back to you too from Germany.
@jjy365959
Жыл бұрын
I have 3090 xc3 hybrid, 1950 at 881, got 21083 gtaphic score on same bench mark
@infinitespace239
Жыл бұрын
Nicee, i have deshrouded my graphics few days, before, and applied new termal paste. Now the graphics card is 10 C cooler than before and it stays at 850 boosting to 2000 mHz, amazing. I have recorded video, so next week I hope it will be ready.
@MardelliAusRajdiye47
2 жыл бұрын
Servus. If you undervolted, how can you determine that the card is running stable? If you can speak German, you can also answer in German 😊
@infinitespace239
2 жыл бұрын
Servus, ja, ich spreche Deutsch aber Englisch besser :) Yes do the stress test for 2 h if there is no crashes it is stable.
@MardelliAusRajdiye47
2 жыл бұрын
@@infinitespace239 Okay, what stress test did you use for stability?
@leewil5173
2 жыл бұрын
I just want to underclock as gpu is like a jet engine. So if it’s same gpu as you can I just copy your settings
@infinitespace239
2 жыл бұрын
Yes, no problem, try it, it will work.
@mayorc
2 жыл бұрын
So increasing memory speed will not consume extra power?
@infinitespace239
2 жыл бұрын
no
@bekko2819
3 жыл бұрын
I have a 3060 can i use this
@artyte_b
3 жыл бұрын
What are your temperatures at load after these configurations?
@infinitespace239
3 жыл бұрын
74 - gpu, 104 - memory
@melfa3
3 жыл бұрын
many thanks
@katakuri8258
2 жыл бұрын
Bro my card is zotac 3080 ti amp holo and I don't know if that works with me or not 😥
@infinitespace239
2 жыл бұрын
Try it, if it is not stable configure it little, nothings going to happen to your card except restarting.
@rokoila9999
Жыл бұрын
on rtx 3090 zotac trinity I recomend limit to 1880 mhz the Core never 1900 or more becose you could have crash ,this is a hardware issue in all zotac grafic caras.
@infinitespace239
Жыл бұрын
Never had crash on my card works like charm with this settings for 2 years already.
@baxtodato
3 жыл бұрын
Man i have the same gpu , have i to pick up every setting what u have done here ?
@infinitespace239
3 жыл бұрын
Yeah, way not try it if it is unstable change something. Test it. But i think it will be fine. With this settings you are safe.
@baxtodato
3 жыл бұрын
@@infinitespace239 ok thanks , where i can contact with you if its possible ? i have to ask something plz
@infinitespace239
3 жыл бұрын
@@baxtodato Just write down in comments.
@NinjaRed5000
Жыл бұрын
So I followed this video for my Zotac 3090, and the first week went well, no crashes or stuttering. However the following week, my gpu would just crash when rewinding or fast-forwarding a youtube video. Can somebody help me out?
@infinitespace239
Жыл бұрын
Well, my first thought is you are at the limit of your GPU. Try changing settings, lowering memory overclock and raising curves maybe you brought the GPU right at the edge. Also try updating your drivers.
@NinjaRed5000
Жыл бұрын
@@infinitespace239 alright I'll lower the memory clock and raise the curve above 1950 and see what will happen.
@infinitespace239
Жыл бұрын
@@NinjaRed5000 Put the curve under 1900 maybe 1820
@NinjaRed5000
Жыл бұрын
@@infinitespace239 OK I'll try that
@NinjaRed5000
Жыл бұрын
@@infinitespace239 should I have power management set to Normal or Prefer Maximum Performance in Nvidia Control Panel?
@dinamobbb6555
3 жыл бұрын
Ubio se za WOT-a 😉👍
@richiepipes8960
Жыл бұрын
I only have one curve line =(
@seerking
2 жыл бұрын
I completely flashed the bios on my Zotac Rtx 3090, the zotac bios is complete garbage. The flashed bios is much much more stable and feels like a completely different card. I'm currently mining eth at 123 Mh/s
@infinitespace239
2 жыл бұрын
Which bios have you used ?
@seerking
2 жыл бұрын
@@infinitespace239 I used a Galax 390w bios one of the 94.02.26.C0.34 Bios Version. Their are a couple with that bios number i think. i use the 390w one and their also a couple 390w galax bios's too. ive used 3 of them. They all work. Galax and Galaxy and Zotac use the same system or board or whatever. something like that i read. But really im so happy i flashed the bios because Zotac was crashing by itself and couldn't have a normal stable clock without downclocking. I knew the Card to handle so much more than their stupid bios was letting.
@infinitespace239
2 жыл бұрын
@@seerking Cool can you give me the link i ll look in to it. Thank you.
@ubyunet
2 жыл бұрын
@@seerking Nice, I'd also be interested in a link to the exact BIOS you used if possible please.
@fenixcl
2 жыл бұрын
Hello!! I have a 3060 ti zotac can you give us some configuration?To mine ethereum Pleaseeeeee
@infinitespace239
2 жыл бұрын
Hello, for mining you need totally different overclocking check my video how to mine on rtx 3090. Good luck.
@sofyo2bib
Жыл бұрын
my old rog strix 3060TI run 900 MV/2150-2175MHZ
@maseratis.p.a4877
3 жыл бұрын
suitable for mining?
@infinitespace239
3 жыл бұрын
Yes, but you have to do different overclocking for mining. Take look on my KZitem I have tutorial.
@GARZA_ICMG
2 жыл бұрын
Running my 3080ti 2100mhz @ 1.01v, saves about 40w, stays around 60c with AC and mem +855 and I can avg 190-200 fps on Warzone @ 1440p
@aminkhan1292
Жыл бұрын
i have the same gpu im going to try this now
@infinitespace239
Жыл бұрын
2.5 years latter my still works perfect so have fun.
@aminkhan1292
Жыл бұрын
@@infinitespace239 sadly didn't work
@infinitespace239
Жыл бұрын
@@aminkhan1292 Try again you must have missed one step, it has to work. You can do it.
@Reasondinn
2 жыл бұрын
bravos
@Howl269
2 жыл бұрын
I only paid 1380 for my 3090 trinity
@baxtodato
3 жыл бұрын
Where we can contact i cant optimised temperatures, cause when i set nvidia control panel settings , temperature goes hot , ((( can you help me with optimisation plz ? Davit Baxtadze
@infinitespace239
3 жыл бұрын
Why would you use NVidia control panel for optimizing? You have to use msi afterburner. Also check your case, maybe you do not have enough air inside the case.
@baxtodato
3 жыл бұрын
@@infinitespace239 i thout i get more fps . i used to do that cause have 3090 :))) , yeah but need help to optimise frequencies by afterburner , Sorry for my English
@infinitespace239
3 жыл бұрын
@@baxtodato You do not get too many fps, you get quieter card with less power consumption, little bit of better performance. That is why it is good to undervolted, life span of your card will be better.
@baxtodato
3 жыл бұрын
@@infinitespace239 so i ask your for your help to undervolt and overlocking )), i dont know how to do that
@infinitespace239
3 жыл бұрын
@@baxtodato But you have the video just follow the steps writing can t help so much. Just follow everything closely and if you are stuck write me for help.
@noobgamer8426
3 жыл бұрын
3080?
@infinitespace239
3 жыл бұрын
same thing try this settings it should work
@johnnyibrahim3674
3 жыл бұрын
@@infinitespace239 i tried it on my asus 3090 and it didnt work my power is 330w what should i do?
@jdub9119
2 жыл бұрын
@@johnnyibrahim3674 If you're using MSI Afterburner, slide the "Power Limit %" down away from 100% - that's what reduced the Wattage for me
@sofyo2bib
Жыл бұрын
@@jdub9119 when u reduce voltage u reduce power limit and for my gpu at 820MV ....can't up above 82% power limit at 99% load
@tars3249
Жыл бұрын
@@sofyo2bib That's incorrect. It reduces the power consumption, not the power limit. You actually get more power headroom. In other words your gpu will use less power but still can hit 100% power usage if required. Try furmark gpu stress test and if you cannot hit 100% power limit in that then sure you can up the voltage if you feel like it and use more power and raise core clock frequency a bit
@madez24
Жыл бұрын
Yeah, I seriously see no reason in buying super OC versions paying 200-400$ extra. And see 450watt energy consumption and have 1850-1900mhz frequency with more noise and higher temperatures. Pure stupid marketing. I did the same to my Gainward rtx 3090 phoenix ( non OC , locked on max 350w tdp), and got the same stable 1850mhz and only 300watt energy consumption ish.
@sofyo2bib
Жыл бұрын
oc version has the best quality component (durability😁) but you can undervolt it for less watts/ temp / noise
Пікірлер: 132