If you're planning on buying any Ubiquiti gear and want to support me use the affiliate links below :) ▶Ubiquiti USA Affiliate Link: store.ui.com?a_aid=MacTelecom ▶Ubiquiti EU Affiliate Link: eu.store.ui.com/?a_aid=MacTelecom
@RyanHaynieWX
10 ай бұрын
Hey there! Thank you for the overview on this! Looking into adding access control to our church main office to keep our bathrooms from being vandalized during the day.
@kennethbell4681
Жыл бұрын
Nice video Cody. We should be adding access control to our church doors for the day-care area. This is a good over view to show what can and can be done.
@bradbb2005
Жыл бұрын
Couple comments: 1. It is 1/3 Amp, not 33A some could be confused, this is a small device. 2. The din rail mount, it actually pushes onto a din rail and snaps on top. This is actually a part i dont like, now when you plug in cables while mounted, it tries to disengage the mount, the spring load should be on the bottom.
@juancolindres4988
Жыл бұрын
🤣I installed mines and was thinking it had the spring lock like the gen 1 did so if I were to install it I wouldn’t be able to uninstall it (in a enclosure) so I had to move the rail to the left so could remove it . Totally agree
@rjdp3
Жыл бұрын
Maybe he forgot the “point 33A” in the script and when reading didn’t noticed. In the image is visible the 0.33A mark 😅
@mattsaxey529
Жыл бұрын
Helpful video, thank you! If you can tell us about unlocking with phones and other mobile devices, that would be cool.
@scoopzuk
Жыл бұрын
I was so confused for the first 3:20s I thought the new control unit only had two inputs on the left and three on the right or I thought it was the reverse of the unit. Finally realised that it's jsut a cardboard cover over the front of the unit. Great review as always.
@ibrahimkesetovic7869
Жыл бұрын
Love the vid's...Always Amazing! 😍 Waiting for full upcoming Install Video, these are even better & amazing to watch Ubiquity Devices in action as it's perfect-perfection. Love Ubiqity so much. 😊😅
@ThomasS17
5 күн бұрын
Hi! I'm looking to install three Ubiquiti Nanostations, potentially next to each other on one pole, to send internet to remote buildings. Would shielded cat5e help to prevent probable interference from having three stations besides each other?
@Skyflightvideos
Жыл бұрын
Hi Cody, do you know if the Yale Smart Key tags or any other brand work with UniFi? I expect we are tied to Unifi Keys tags.
@respectks563
Жыл бұрын
Is there a way to add multiple cards at once, instead of just adding 1 card per door at a time? This doesn't seem very enterprise friendly unfortunately.
@BruceKraftJr
Жыл бұрын
Do you know if the access electric lock works with typical push bars?
@narnol02
Жыл бұрын
Will these work with any NFC cards. Something less expensive if my church where to go with this.
@johnrogerssr.7060
Ай бұрын
I wish that UniFi would add NFC to the G4 Doorbell Pro so that it could be used for home access control.
@alfadat
6 ай бұрын
Hi Cody, thanks for doing this videos! Quick question, the Electric Door Strike, works randomly (the setup is correct), it happened to you? could be a defective unit?
@mtirado2009
Ай бұрын
Hello, greetings. I'm a fan of your Ubiquiti technology videos... I hope you can help me with something... we are installing Ubiquiti technology in the headquarters of the company I work for in Venezuela... part of that technology is Telephony... but the system does not allow us to use Venezuela even though the line is analog... any advice?
@RafaelCavalcanti84
5 ай бұрын
Hi, do you think that install this system into a apartment door worth? Thanks for your videos
@kevinwinklaar6273
11 ай бұрын
I've installed a feu and they are indeed sleek, still for some reason most clients like the Gen 1 more in design.
@DaylightStudio-x9c
5 ай бұрын
HI , thx your videos are great , we just install the G2 , but the door lock is working on reverse , meaning it locks when we unlock , would you know how to have this fixed
@MOTO_LEW
3 ай бұрын
I have a perfect project for this! Back gate strike lock, I can put my old g3 flex to capture then Front of the gate and then another to capture the back side, just wondering as this is the gate I bring my motorcycle in do we have a setting that will allow ai to detect the number plate then unlock the lock 🤔 Would work so well zip in form work don’t even have to get off the bike 😂
@MichaelBylehn
10 ай бұрын
I hope they also release a physical numpad. It's frustrating to use a small touchscreen in cold climates.
@Niocowboy
11 ай бұрын
Hi Cody, Hope you're doing well. I'm reaching out because we're experiencing some issues with our door access settings. Currently, we have the doors set to open when a specific person arrives, and this works perfectly from 8:00 a.m. to 12:00 p.m. Eastern. However, at 12:00 p.m., they should lock for our lunch break and reopen between 1:00 and 5:00 p.m. Eastern. Unfortunately, the doors stay locked after 1:00 p.m., and we can't figure out why. I've tried a few times, and it seems to work initially, then stop working. I'm not sure if there's a glitch or if I'm setting it up incorrectly. Your expertise in Ubiquity is much appreciated, and I trust your guidance more than customer service explanations. Looking forward to your advice. Thanks for your help, and we'll definitely support your live stream with some coffee funds soon. Best regards, "Reflect who you are!" #Ubiquity #AccessControl
@thelegion538
3 ай бұрын
Hi, what poe switch did you use to power up the hub?
@fawkyooo7377
10 ай бұрын
Hey Cody, does every door need an Access Hub? or can one hub control multiple doors? Also does the Access Hub have the ability to do contact sensors? Can the access hub sound an alarm if a door is opened? like my Brinks alarm can it trip that?
@El3andro
Жыл бұрын
Interesting video; although I'm not using it. Do you know when you might release the full Unifi setup 2023 video?
@jtodd76
11 ай бұрын
Does anyone know if you can use a UniFi PoE++ Adapter rather than a $700 24 port pro switch? I have a client that need one door with an electric lock and I doubt they want to spend the extra money for a $700 switch if we can use a $30 UniFi PoE++ Adapter. Thanks
@MactelecomNetworks
11 ай бұрын
Yup you can use a PoE++ adapter ca.store.ui.com/ca/en/pro/products/u-poe-plus-plus
@danielwillitzer7220
Жыл бұрын
Is the G2 Pro weather proof / rated for outdoor use?
@MuffinManIV
Жыл бұрын
Same question here, considering it for my gate in front of my house
@djz3r063
Жыл бұрын
Stupid question, possibly. Do you have to buy one of those kits for every door (for the lock/unlock feature) or can one do multiple doors? IE: you need one panel per door?
@MactelecomNetworks
Жыл бұрын
Not a stupid question at all. You can only have one door per access hub
@erniegarcia6808
11 ай бұрын
Do you know when you will be uploading the install video?
@MartinAmaru-d6n
9 ай бұрын
Hey, sry for my Question in bad Englisch, I have an aluminum door with an electric locking system, where I can connect the open function with two cables. Can I connect this to the system or do I need to change the electric strike on the lock? Many thanks for your help
@MactelecomNetworks
9 ай бұрын
Hi to connect the electric strike to the Unifi access hub it would need to be 12 volt
@SimmalSJ
10 ай бұрын
Hi, stupid question, how can I use ONE G2 Professional to manage the entry of a single door for two apartments in the house.
@noname54
10 ай бұрын
You can add the one reader on the outside to trigger the door strike on the entry door. Users should have free egress when exiting like a push bar to open door from inside. This is what i am doing for my house. I wish Ubiquity would sell the kit with the professional reader and not the lite as I wont need a reader in the inside of my house.
@mins1975
11 ай бұрын
Hi Cody, this new hub controls 2 door? Door1-maglock/sensor/rex sensor Door2-maglock/sensor/rex sensor Much appreciated😀
@kristopherleslie8343
9 ай бұрын
I think Hubs only do 1 door. I use Kantech so hopefully UBNT will offer more doors
@rfvtech3261
Жыл бұрын
more stuff about this kit: - Many cell phones randomize their NFC tags now so you cant pair MANY models of cell phones with the reader including the google pixels, rendering the NFC functionality useless. - Notifications on the Uifi Access app are broken and are unreliable, so there is about a 30% chance the door attendants will get the call. Ive seen the access reader calls not work on 8 of 10 cell phones.
@MactelecomNetworks
Жыл бұрын
Good info. When I was speaking on the Unifi mobile it’s for the actual mobile app not nfc
@VivaldiJean
Жыл бұрын
Can we use the same nfc card to multiple site?
@MactelecomNetworks
Жыл бұрын
You can not
@shaun7611
Жыл бұрын
I want... :)
@VivaldiJean
Жыл бұрын
Nice video
@fkmobile1
Жыл бұрын
Is it possible to configure mag locks to auto unlock on power failure?
@vono360
Жыл бұрын
Mag locks by default are fail safe meaning they deactivate upon power failure.
@michelaufderhaar6755
11 ай бұрын
How many users are we able to use for free on unifi acces??
@oneito947
Жыл бұрын
is there or will there be a subscription fee
@MactelecomNetworks
Жыл бұрын
There’s zero subscription fee for Unifi access. UID there was for mobile unlock but soon you will be able to have UID local for free with mobile unlock
@backupaddict1356
Жыл бұрын
I would love to add these to a couple doors, but they are just to expensive.
@vono360
Жыл бұрын
Depends on if you’ve got to pay to install it or if you’ll do it yourself! Makes a big difference
@backupaddict1356
Жыл бұрын
true, I would do it myself, not that big of a job really. @@vono360
@tedev
Жыл бұрын
wait... you can't unlock the door remotely? really?
@Maximess7
Жыл бұрын
I thougt there was an g1 elevator kit
@MactelecomNetworks
Жыл бұрын
It was in EA
@Maximess7
Жыл бұрын
ik @@MactelecomNetworks
@backupaddict1356
Жыл бұрын
I did not see that being a big seller. Am I wrong?
@Maximess7
Жыл бұрын
@@backupaddict1356 ur not wromg it wasnt selling too much onley like 100 was sold (i think)
@SpookyLurker
Жыл бұрын
Does this system require internet access to function?
@snymat_68
Жыл бұрын
---> POINT
@bradford5833
9 ай бұрын
Hi Cody, what happens if the hub cant reach the UDM but has power? Does the user information get stored locally on the hub? Looking through the UI forums, it seems if there is a power loss the HUB maintains some settings in regard to scheduled unlock? Im thinking in the event the UDM loses power before the HUB it continues to work on the last configuration?
@bpaullus
10 ай бұрын
Can this be connected to a fire alarm system?
@MactelecomNetworks
10 ай бұрын
Yup it can
@bpaullus
10 ай бұрын
@@MactelecomNetworks can you do a video showing this? Or point to a video that has done it?
@bpaullus
9 ай бұрын
Can it do delayed egress? @@MactelecomNetworks
@AnandakrishnanM27
Жыл бұрын
why dont they add fire integration in the software? we want the hub to receive a fire signal from the buildings fire module and activate emergency evacuation on all hubs in the network...
@juancolindres4988
Жыл бұрын
I installed this system and you can add input that will trigger evacuation mode on it!
@AnandakrishnanM27
Жыл бұрын
@@juancolindres4988 hi can you specify more..how is the process? is there any link that I can refer
Пікірлер: 69