🔗 My SV08 macro collection (Heat soak + Current Z) → cults3d.com/en/3d-model/tool/...
💙 Short link to SV08 landing page: bit.ly/sv08 ($579 early bird!)
💙 Official SV08 product page → www.sovol3d.com/products/sovo... (affiliate link)
💙 SV08 Recommended upgrades:
► Enclosure → sovol3d.com/products/sv08-tra...
► Touchscreen → sovol3d.com/products/sv08-upg...
► 0.2mm-0.8mm nozzle kit → sovol3d.com/products/sv08-met...
💜 My STL models:
► E-step calibration ruler + Cali-Corner for XYZ tuning → cults3d.com/en/3d-model/tool/...
► SV08 fan mod → cults3d.com/en/3d-model/tool/...
► Klipper Screen fan mod → cults3d.com/en/3d-model/tool/...
► SV07+ dust cover system → cults3d.com/en/creations/sovo...
► SV06+ dust cover → cults3d.com/en/3d-model/tool/...
► SV06/+ Z-markers → cults3d.com/en/3d-model/tool/...
► T300 Z-tilt knob → cults3d.com/en/3d-model/tool/...
► T300 silent fan mod → cults3d.com/en/3d-model/tool/...
💰 More affiliate links (helps me with no additional cost to you!)
► Comgrow T300 printer → sovol3d.com/products/comgrow-...
► Sovol SV07 Plus printer → sovol3d.com/products/sovol-sv...
► Sovol SV06 Plus printer → sovol3d.com/products/sovol-sv...
► Klipper Screen for SV06 Plus → sovol3d.com/products/sovol-kl...
► Sovol filament → sovol3d.com/products/rainbow-...
► FixDry filament dryer → fixdryofficial.com/products/f...
🛒 Amazon links:
► Comgrow T300 → amzn.to/3x2vG1d
► SV07 Plus → amzn.to/3yK2RXY
► SV07 → amzn.to/3VrlGYI
► SV06 Plus → amzn.to/4ebxHsT
► SV06 → amzn.to/4e4wyTN
► SV06/Plus Klipper screen → amzn.to/4aMTJiw
► FixDry Double NT1 Filament dryer → amzn.to/3x4PBg1
► Wainlux K10 mini laser engraver → amzn.to/45bC9Ur
⚠ Disclaimer: I followed the official Orca Slicer documentation and best practices to the best of my knowledge and successfully calibrated the filament in the vide. However, I cannot assume responsibility for any damage that may occur to your printer or other belongings if you follow my guide. Always consult the online documentation and ensure you understand the purpose and process of each step before proceeding.
🎬 Chapters:
00:00 What we are printing
02:01 Filament calibration:
02:42 Temperature
03:30 Flow rate
05:22 Linear Advance
06:51 Retraction
08:18 Max Vol Speed
10:16 Slicer settings
13:10 Print Attempt 1
15:11 Problems...
16:59 Fixes
18:50 Success
Негізгі бет Тәжірибелік нұсқаулар және стиль Unlock Flawless Big Prints: Orca Slicer Filament Calibration Guide (Sovol SV08, engineering PLA)
Пікірлер: 57