For anyone watching with a 10th gen intel CPU, after days of pulling my hair out, I finally figured out you HAVE to update to the current unraid beta OS, 6.9, to get /dev/dri to show up. I guess lower versions don’t recognize/support it or something. After doing that and following this tutorial I finally got up and running
@presjar4016
3 жыл бұрын
FYI, use 1080p if you are showing text on screen. You can't read the small text in your video.
@beyondcloudtechnology6912
Жыл бұрын
Thank you for the Video but I agree with this or at least post it in the description. I use a P2000 but just wanted to see if I can do without it to free up a slot. Thank you again
@rhsjmm54
Жыл бұрын
Unfortunately, the linuxserver container you are installing no longer contains the extra docker parameter you are referring and your video resolution is not good enough for me to read it off the screen. :(
@tomp9447
10 ай бұрын
Make more vids, you could be the next SpaceInvader! Key points in 2023; any Plex will work, go to advanced view, and add "--device=/dev/dri:/dev/dri" to a line. You got me 90% there, so thanks!
@gib6717
10 ай бұрын
How do I add this? What line does it go in?
@tomp9447
10 ай бұрын
@@gib6717 add a key at the bottom of the docker/unraid config page.
@gib6717
10 ай бұрын
@@tomp9447 In case anyone else needs this info it needs to be added as a device!
@shayhildebrand337
8 ай бұрын
Thanks for getting that line to add, couldn't get it working with my 7th gen I5 mini PC I just got. Now were good!
@lorcster6694
5 ай бұрын
@@tomp9447 docker: Error response from daemon: error gathering device information while adding custom device ""--device=/dev/dri": no such file or directory.
@chipped
2 жыл бұрын
Thank you so much, after so much googling I found your video which was super easy and worked right away!
@CptChaz1
2 жыл бұрын
Awesome!
@cd9954
6 ай бұрын
Can't read what the line I actually need to add says, due to the low resolution. Adding that info to the description would be helpful. Thanks for the video!
@DevilDriver665
3 жыл бұрын
any reason for 720p only? no zoom in the browser + this "low" resolution makes it kinda blurry....
@CptChaz1
3 жыл бұрын
Been investigating this for a few days. Not sure what happened with it, source file was 1080, somehow the upload process only delivered up to 720p. From what i've seen on reddit, it seems i'm not the only one this has happened to. Smaller channels with lower priority seems to fall prey to the circumstance more than others. 🤷♂️
@juise99
3 жыл бұрын
720p really doesn't cut it when you're showing text in a browser.
@CptChaz1
3 жыл бұрын
Yes, as I responded to another user in the comments for this video, the short version is: it was a KZitem issue with this coming out 720 instead of 1080. Thanks for the input though, and I do agree.
@erodz1892
Жыл бұрын
Had to disable hdr tone mapping to work but so far so good. Not sure why it doesn’t even affect the colors they don’t look washed out or nothing a big win.
@nathanboyd6883
4 күн бұрын
For anyone running into the same issue as me, if you are using the linuxserver unraid docker and you have a dedicated GPU setup and working on your server the container will refuse to utilize the cpu for transcoding. As soon as I removed the other gpu it immediately recognized my coffee lake cpu for transcoding. Thankfully I do not need my dedicated gpu and was swapping to quicksync because I was removing it anyway but still a really frustrating issue.
@HacksawJimThuggin
2 жыл бұрын
Great video!! everything work as it should
@seamydobbsno1
3 жыл бұрын
Again thank you mate!!
@gmaclean1
3 жыл бұрын
Will be obvious to most, but just in case. Hardware transcoding is a Plex Pass feature.
@Destide
Жыл бұрын
Managed to score a 9th gen i7 from work and was thinking about buying a LP 1050ti but after following this I don't think I need to.
@pattes4304
6 ай бұрын
perfect, thanks
@kazumakazuma5814
3 жыл бұрын
thanks for the very helpful video
@whyme421
3 жыл бұрын
After seeing your video and Reading how intel 10th gen uhd 630 is really good at transcoding, I'm begging to wonder if my 1660 super is really needed on my UnRaid. Since I only have max 4 streams at any given on plex, I figure I can use my 1660 super on another PC for productivity work and gaming. Being GPUs are scarce, could you provide a video on how to go from an nvidia gpu plex setup to intel plex setup. I am new to UnRaid and slowly starting to learn from watching useful videos like yours, and hate to mess up my current setup. Thanks
@mohitsingh4711
2 жыл бұрын
Can you please make a tutorial on how to use and verify intel quick sync(with the same i7-3770) on jellyfin.
@hakonmm
4 ай бұрын
Thanks
@StephenZura
2 жыл бұрын
Great Video! Just wanted to share my experience with a newer CPU. PSA Picked up a 12900K and cannot enable hardware transcoding, cannot even boot into unRaid GUI unless I add a dedicated GPU (which disables Intel iGPU). uncertain if it's a driver compatibility issue or related to intel's EFI shenanigans.
@CptChaz1
2 жыл бұрын
Thank you! I had a similar experience on one of my servers with a Ryzen. Unfortunately that’s a little outside the scope of the KZitem comments here, but definitely recommend posting in the unraid forums, chances are someone there has had the same experience and may know the fix. Good luck!
@ronaldhaley6169
2 жыл бұрын
@@CptChaz1 To use iGPU on recent intel cpu's, make sure you boot in UEFI mode with compatibility mode turned off!
@TheGoatPC
Жыл бұрын
that intel plugin is no longer showing in unraid. Any updates?
@IronCondorSimulations
Ай бұрын
Good video. Is there a way to do this with AMD GPUs?
@colinandkerry
3 жыл бұрын
Fantastic simple and easy to follow love it. Is this the same for the new update 6.9
@CptChaz1
3 жыл бұрын
Good deal, thank you! And yes, can confirm it also works on 6.9
@ivyZorz
11 ай бұрын
I was able to finally get this working by unplugging a dedicated GPU from my motherboard. It was working previously and then when I added the dedicated GPU, the intel TOP dashboard utility stopped updated correctly and my transcoding screeched to a halt. Removing it fixed it. I'm sure theres a way I can have both installed and "select" the iGPU for the transcoding but I'm not quite sure how to do that
@robertwynter2464
3 жыл бұрын
would you be willing to do one of these videos for Jellyfin on unraid? It's been a big struggle for me to get the transcoding right and I think this would help.
@CptChaz1
3 жыл бұрын
I’ll see what I can do!
@tucker2251
3 жыл бұрын
biiiiiiig brother... my man!
@THEG12EG
Жыл бұрын
I have downloaded the latest version of plex and it no longer has the scrip at the top of the config... can you help
@HammyHavoc
2 жыл бұрын
Do I need a dummy plug to activate Quick Sync?
@CptChaz1
2 жыл бұрын
Generally no, but depending on the system maybe. I have a store-bought dell with an amd that won’t activate the gpu at all unless it’s plugged in. Might have to dig a little deeper on the google for that one. Good luck!
@HammyHavoc
2 жыл бұрын
@@CptChaz1 I rebooted and it all works well without a dummy plug. :- )
@grandpixel
2 жыл бұрын
Publish in 1080p so we can read the text.
@TheGoatPC
Жыл бұрын
720p?? can hardly make out your screen at that resolution.
@sinhalo
3 жыл бұрын
So if I did it the old way do I need to remove the old go file? I’m just curious so I don’t have old settings in my go file.
@CptChaz1
3 жыл бұрын
Hi John - to be honest, i'm not 100% sure. Anecdotally, i did not have any issues installing the plugin while i had the modifications to the go file in place. however, if you want to be absolutely sure you don't have any issues, you could always remove the modifications and then install the plugin.
@DanAllen1
3 жыл бұрын
I have a i7 6700, can I pass that to a VM ? Already have a RTX in use for PLEX
@CptChaz1
3 жыл бұрын
That's a great question, unfortunately not one with an easy answer, but in short - maybe. I've seen mixed results for folks passing through their skylakes, and in some cases it has as much to do with the mobo as it does the cpu. your best bet is to take that to the forums here: forums.unraid.net/topic/45385-intel-igd-integrated-graphics-pass-through-support-march-2016-update/page/6/
@joshrp5
2 жыл бұрын
Does quicksync still only work on the linux docker?
@CptChaz1
2 жыл бұрын
Afaik, yes
@abitehaile2018
3 жыл бұрын
any chance you would know a way to make this work with 11th gen intel cpu?
@CptChaz1
3 жыл бұрын
i can look into it. what unraid version are you on?
@abitehaile2018
3 жыл бұрын
@@CptChaz1 thanks for the fast response I'm on version 6.9.1 and I just upgraded from an i3 10100 to a i5 11500 for upgraded igpu performance
@abitehaile2018
3 жыл бұрын
It worked perfectly with the i3 no luck with the i5 been working on it since about 5pm today
@CptChaz1
3 жыл бұрын
@@abitehaile2018 sure thing. let me see what i can do and i'll get back to you.
@abitehaile2018
3 жыл бұрын
@@CptChaz1 just went back to my i3 and now the gpu transcoding isn't working on that but I'm able to see the gpu when i use cd/dev/dri but it's just not in use when I try to transcode a movie on plex
@evanmarshall9498
2 жыл бұрын
Great video... poor quality
@CptChaz1
2 жыл бұрын
Yep!
@methanoid
Жыл бұрын
Dude, how about some help for the many comments with problems highlighting video may not be relevant now.... Don't be like "other" unRAID videos and just ignore your community ;-)
Пікірлер: 66