Hi Tom. I've just replaced my brake pads on TrkX after following your video. EBC on the front and Brembo rear. A piece of cake to do. I did use copper grease sparingly. What a.massive difference in stopping power. Nice one, cheers.👍
@BenelliTomTRK
Жыл бұрын
Your very welcome mate. 😎🤘🇬🇧
@gsladin4970
8 ай бұрын
Hi Tom, great video thanks. Exactly the same system on my 2017 BN302, just done the job, easy and quick with your video to fall back on. Cheers
@BenelliTomTRK
8 ай бұрын
So happy to help mate. Thanks for watching stay upright. Tom 🤘😎🇬🇧
@ianbell1321
2 жыл бұрын
Brilliant video Tom, will be ordering both sets of pads to get this done. Cheers mate.
@BenelliTomTRK
2 жыл бұрын
Hi Ian if you do the back brake. Take the top of the master cylinder head on the right side of your handle bars. This stops any back pressure and the need for bleeding the brake . Thanks for watching bro. 🤘😎
@ianbell1321
2 жыл бұрын
@@BenelliTomTRK cheers Tom, will make sure to do that, thanks for the advice and keep up the great work. 👍
@BenelliTomTRK
2 жыл бұрын
Ian thanks so much for your support and generous offer to my PayPalme/maher923. I will give you a shout-out in one of my videos. Thanks Ian 🙏🤘😎
@ianbell1321
2 жыл бұрын
@@BenelliTomTRK Its my pleasure Tom, it wasn't much, but I hope it helps.
@petervoros840
2 жыл бұрын
Thanks for this Tom, I have a 502x but the rear brake is the same I think. The front brakes are different but still pretty easy.
@BenelliTomTRK
2 жыл бұрын
Your welcome mate . Thanks for watching Peter.
@BenelliTomTRK
2 жыл бұрын
Peter I just wanted to say a big thank you for your generous offer you made to my PayPalme/maher923 . You are the first person to have done that. Thanks for your support. On my next video I will be giving you a big shout out 🙏. Also if you change the rear break take the top off the master cylinder head ( on the handle bars right side) this will stop any need of bleeding and back pressure. Thanks again so much Peter
@ianbell1321
2 жыл бұрын
Are the pads the same on both 502 and 502x models.
@petervoros840
2 жыл бұрын
@@ianbell1321 no the 502 x has different front pads to the 502 the rears are the same I think.
@ianbell1321
2 жыл бұрын
@@petervoros840 OK, I will look at which ones I need to purchase. Thanks for letting me know.
@johnjackson1949
8 ай бұрын
Thanks Tom for brake tutorial, great help. Will report back on EBC HH upgrade Why does the trk vibrate so heavily ?.
@BenelliTomTRK
8 ай бұрын
Some do some don’t mine is ok. Don’t feel it as much when I just rest my toes on the pegs
@leeharper4395
4 ай бұрын
Hi Tom, I just changed the pads on my TRK 502X and after watching your video i noticed that the pads that were on did not have those plates on the back, are they essential? TIA.
@BenelliTomTRK
4 ай бұрын
Hi Lee don’t think so if they was not on when you took them off you should be fine. You could use a little copper grease on the back of the break pad. If you’re not happy REMEMBER AM NOT A MECHANIC. So please ask a professional. Look after yourself Lee .stay upright. Tom 😎🤘🇬🇧
@mariovalencia8993
Жыл бұрын
Hi Tom I did the rear brake pads, but somehow I managed to damage the system or something, I bought the pump for those rear brake because I thought I fucked it up, so installed this morning and nothing worked as before, the cylinder does not push the brake pads and make them work. I'm so pissed that I might not could use the motorcycle until I found out what happened. Cheers.
@BenelliTomTRK
Жыл бұрын
It’s very hard for me to say without being able to see it. But it sounds like you may need to bleed the break . If you have any biker friends they should be able to help you with that. Good luck mate hope you get it sorted Mario. 😎🤘🇬🇧
@christopherlynch235
2 жыл бұрын
Great job Tom.Did mine and what a difference those EBC pads make.Alot more bite,alot more confidence riding in traffic.Superb.
Пікірлер: 23