i have a e07 which ive got a prommy purple flat hop (stock hop unit) SHS 13:1 gears and stock motor. Jefftron v2 mosfet...thing TEARS.. will be a DMR with strong spring and semi lock/ pre cock profile and CQB beast with weak spring.
@markoveljkovic3277
9 ай бұрын
Hello, do u maybe know whats the purpose of rubber O ring on amplifire, and can I remove it and play without it? Thanks
@sfarc2359
4 жыл бұрын
Awesome video ! I am super upset that SA released the ASTER version of the edge series 2 months later with no announcement and with a very low stock :( . I got the one with the aster and it's a beast of a mosfet in a beast of a gun . The other thing i wanted to say is everybody who buys a new specna arms replica should shimm and grease before you fire the first shots , mine came broken out of the box ( the bb's would fly for like 7-8 meters ). The hop was pressing way to hard on the bb's and the gears and piston had absolutely no lubrication . Quick gum change + grease and shimm and now it's a beast . I have compared it side to side with the E series and there are not a lot of differences between them , the Aster mosfet makes all the difference ( in the trigger respone , you can set a 0 trigger with the gate-link, fire select modes , troubleshooting etc. ) .
@omgyeaXD
4 жыл бұрын
Where did you get one? Edit: NVM found one. Thanks for the info! Edit2: I just bought the last one lol.
@BIGBIRDSAIRSOFT
4 жыл бұрын
The Aster looks really good. I run a number of titans in different guns and they are always amazing mosfets. For the price of the Aster it’s worth dropping in.
@omgyeaXD
4 жыл бұрын
@@BIGBIRDSAIRSOFT I just got it as my first ever airsoft gun. I'm not sure if it'll come with the gate-link. I'll have to watch some videos on how to shimm/ gum/ grease it etc XD
@sfarc2359
4 жыл бұрын
@@BIGBIRDSAIRSOFT if you buy the replica with the mosfet it comes out like 40 euros for the mosfet instead of 80 for the stand-alone
@BIGBIRDSAIRSOFT
4 жыл бұрын
DaveTheBasha I’ll be doing a maintenance video on this gun soon so stay tuned 👍
@Nuchie88
2 жыл бұрын
Was the SA-E07 EDGE upgraded at all?
@Impz-cz2de
2 жыл бұрын
Anny good tips to fix stock wobble? :).
@BIGBIRDSAIRSOFT
2 жыл бұрын
I actually show you how to do that in one of my videos but I can’t remember which! Basically use the fuzzy side of a Velcro strip on the stock tube.
@blackpandagameplay29
2 жыл бұрын
I'm interested to know what upgrades you've made to the 416. I'd like to get an answer, thank you
@chrismcginty3687
4 жыл бұрын
Hi pal i have the spectra arms sa co2 core m4 wondered if could give me some ideas for a good hop up.and rubber and piston ect i be getting a titan advance after crimbo so looking other stuff 1st
@BIGBIRDSAIRSOFT
4 жыл бұрын
Hi Chris, I like the Maple Leaf Macaron hop rubber and Omega nub. I’ve had some great results with them 👍
@chrismcginty3687
4 жыл бұрын
@@BIGBIRDSAIRSOFT anything else you put in
@BIGBIRDSAIRSOFT
4 жыл бұрын
Chris Mcginty piston, piston head and cylinder head, all shs and a tight bore barrel 👍 don’t blow the budget though, it’s all about marginal gains.
@stevengable4969
2 жыл бұрын
Great video. I was looking for just that comparison.
@Zolitalus
4 жыл бұрын
Nice video! What did you use to colour in the RRA logo and semi auto text??
@BIGBIRDSAIRSOFT
4 жыл бұрын
Well, the RRA logo was done with a paint pen but you have to be VERY careful not to stain your original paint colour. The safe auto etc is too fine to do with a pen so I used a very fine line brush and Tamiya gloss paint. The results look great but keep a steady hand 😉
@marcushillerstrom25
4 жыл бұрын
On my Tippmann I filled it in with crayons that I stole from my kids. All you do is just go back and forth over the engraving, and then you just wipe the excess of when you filled in the engraving. It's still on there now three years later, so that is a easy and cheap way of doing it.
@alexseverne3792
4 жыл бұрын
Hey! Great video! Does the E07 come with an M110 inside? I dont want to cut the spring, but also agree that the M90 would be too low for it. Have you had a chance to test it with an M100? Thanks!
@BIGBIRDSAIRSOFT
4 жыл бұрын
Mister Lizard I’m pretty sure the original is an M110, I have put an M100 in and it’s doing 338 to 345 consistently. I have improved the air seal slightly too with new grease in the cylinder. M100 is perfect.
@alexseverne3792
4 жыл бұрын
@@BIGBIRDSAIRSOFT Brilliant, thanks for that! Really enjoy your videos, this one in particular has convinced me to pick up the E07. Keep up the good work!
@BIGBIRDSAIRSOFT
4 жыл бұрын
@@alexseverne3792 remember to watch my video on how you can service it too 👍
@IAmGeorge6609
4 жыл бұрын
Do you have confidence in the gearbox of the E07 handling the 11.1v? Very skeptical using going above 7.4
@BIGBIRDSAIRSOFT
4 жыл бұрын
George Lee yeah mines been fine, just spins fractionally faster. Your still compressing the same spring. It when you go to springs over 110 I’d worry.
@JB-FN2
4 жыл бұрын
Looking forward to the next vid mate, should mention specna do there own prowin type hop up and tight bore barrels. Its half the price of the high end stuff but it is basically the same thing. Just need the Maple Leaf hop rubber. Which would you suggest buying?
@BIGBIRDSAIRSOFT
4 жыл бұрын
In all honesty ProWin chambers are not the magic ingredients for all guns. I have an L85 that was transformed with one but I had an M4 that wouldn’t work with it. I say try the Specna version with Maple Leaf rubber and nub. I’m not going to change the plastic hop unit in the E07, just the rubber and nub. 👍
@JB-FN2
4 жыл бұрын
@@BIGBIRDSAIRSOFT The only reason I changed my hop up and barrel is because I broke the original fiddling with the internals. Which stresses the importance of doing reasearch first
@BIGBIRDSAIRSOFT
4 жыл бұрын
LOL I’ve broken so many parts over the years of experimenting with Airsoft guns and learning how to do things.
@marcushillerstrom25
4 жыл бұрын
Nice vid as always. In 2020 Specna will release their new Edge H-series, so the 416 but with the Orion gearbox and the other upgrades. That and the AK Edge line is intriguing, I just might get two new Specnas next year. But first I'm going to get the new CYMA platinum 098, because I really like 7.62 guns.
@BIGBIRDSAIRSOFT
4 жыл бұрын
Ah you just read my mind! I’ve been thinking of doing a DMR build with the CYMA 098! Although I am doing an SVU DMR soon so it may have to wait. I need more OPFOR action lol. I can’t wait to see what Specna release next. Thanks for feedback 👍
@marcushillerstrom25
4 жыл бұрын
@@BIGBIRDSAIRSOFT We must have a very similar taste in guns because I also want to get the SVU and do a opfor/badguys DMR built with it. It's just that I already got the magasines and the furniture I want for the sr25 style reciver, so I'll think I'll do that one first. I also need a plain and simple akm or ak74 for my standard opfor setup, any recommendations?
@BIGBIRDSAIRSOFT
4 жыл бұрын
Lol yeah. For AK’s I’ve always rated the E&L, LCT and the Bolt AK74u is stunning. Not had a lot to do with the CYMA AK’s but may be a good project base for upgrades.
@_mathew_2850
4 жыл бұрын
Nice vid bro
@davidking6594
4 жыл бұрын
What did you do to solve the stock wobble? Both of mine are the same...
@BIGBIRDSAIRSOFT
4 жыл бұрын
Just a bit of self adhesive Velcro (fuzzy side) on the top of the stock tube. It works a treat 👍 mine are solid as a rock now.
@davidking6594
4 жыл бұрын
Ah cheers I was wondering if it was that. I needed some in the mag well too , even with specnas mags....
@BIGBIRDSAIRSOFT
4 жыл бұрын
David king yeah same here. Although I have an original magpul m4 and that does too.
@jirehvlog7562
4 жыл бұрын
nice video! do you know about specna A03-M-CHAOS BROZE version? it is good vs specna E19? I wanna buy a A03, about 240euro, is it worth?
@BIGBIRDSAIRSOFT
4 жыл бұрын
Jireh VLog the E19 will be the same as all the edge 1 series. I’ve not seen the bronze version but the A03 is better than the edge. It doesn’t have as many fancy parts internally, but overall they are better built and nicer to upgrade. That’s obviously just my opinion. Go for the one you like the look of.
@jirehvlog7562
4 жыл бұрын
@@BIGBIRDSAIRSOFT thank you for your very useful suggest! I will buy the A03! btw the website GUNFIRE is good? u know it?
@BIGBIRDSAIRSOFT
4 жыл бұрын
Jireh VLog you’re welcome, yes I’ve had many guns from Gunfire, they are a good retailer 👍
@filipekk7572
4 жыл бұрын
hi, what rubber would you recommend to specna e01 ? Black systema or anything else ?
@BIGBIRDSAIRSOFT
4 жыл бұрын
Filipekk yellow (60 degree) maple leaf macaron. I’d consider a tight bore barrel too.
@filipekk7572
4 жыл бұрын
@@BIGBIRDSAIRSOFT thanks will definetely look out for those on taiwangun/gunfire
@darrenadams7037
3 жыл бұрын
Hi BIGBIRDSAIRSOFT, been looking at getting the e07 for a while now. I know it fires 360 is fps out the box but patrol base which im looking at have said they change the gun to an m90 spring before selling the gun to make it uk legal. Did you get yours from abroad or did they not change the spring when you bought it from a UK site ?
@BIGBIRDSAIRSOFT
3 жыл бұрын
I got mine from Poland, and I run an M100. What you get from the M90 will depend on how good the air seal is.
@darrenadams7037
3 жыл бұрын
@@BIGBIRDSAIRSOFT so you got yours from abroad then, makes sense that it fires at a higher fps then. Going to use .25s to see if thats enough to drop the fps abit more too
@BIGBIRDSAIRSOFT
3 жыл бұрын
@@darrenadams7037 as long as it’s under 350 it’ll be fine.
@petervisi5369
4 жыл бұрын
Hi. Good video, thanks for that. I have a SA-H03. It's not quick change system, is the 'Enter and Convert' (spring accessible from the back of the gearbox). What spring should I use to get near 350fps(UK limit)? I tried Guarder sp100=369fps. Element m105=370fps, Super Shooter m110=400fps. The two springs comes with the gun is 290 and 400fps. I have to use the 290 until I find another.
@BIGBIRDSAIRSOFT
4 жыл бұрын
Péter Visi any spring that can be removed without splitting the gearbox are technically “quick change”. Obviously if you have to remove the gearbox it’s not that quick. I use Guarder sp100 with the coils trimmed. Mine is currently running at 345fps 👍
@petervisi5369
4 жыл бұрын
@@BIGBIRDSAIRSOFT I meant the advertised SAEC, quick change from the back of the stock. Looks like I have to trim a spring. I will try luck with the Element m105 trimming first. Thanks.
@BIGBIRDSAIRSOFT
4 жыл бұрын
Péter Visi just take one coil at a time and try it. 👍
@MKAnr1
4 жыл бұрын
the hole point in using ML rubber is to use heavy bb´s ?
@BIGBIRDSAIRSOFT
4 жыл бұрын
Yes it is. Anything over 310fps and I use .28 bb’s as a minimum. However, you need to have a good quality hop rubber to use them.
@alexanderhall8977
4 жыл бұрын
@BIGBIRDSAIRSOFT, I need your help. I am new to airsoft (ish) and i have just purchased the SA-E10 by Specna arms. I want to know if i can jam an 11.1V straight off the bat. The site recommends a 7.4V but obviously bigger is better. Will this be a risk without firstly taking it apart and checking the shimming and greasing? Also, just want to say how informative and helpful your content is. Cant really find anything else like it. So thank you.
@BIGBIRDSAIRSOFT
4 жыл бұрын
Alexander Hall the X-ASR mosfet will protect the trigger contacts when using an 11.1v battery, however an 11.1v will always put more pressure on the gearbox over time. I use an 11.1 in mine without a problem but I’m not really worried about breaking it either. Once the shimming etc is sorted, a 7.4v battery with high mah and a C rating of around 25 can also give you plenty of performance. I probably use those more than the 11.1. 👍
@BIGBIRDSAIRSOFT
4 жыл бұрын
Alexander Hall the X-ASR mosfet will protect the trigger contacts when using an 11.1v battery, however an 11.1v will always put more pressure on the gearbox over time. I use an 11.1 in mine without a problem but I’m not really worried about breaking it either. Once the shimming etc is sorted, a 7.4v battery with high mah and a C rating of around 25 can also give you plenty of performance. I probably use those more than the 11.1. 👍
@alexanderhall8977
4 жыл бұрын
@@BIGBIRDSAIRSOFT OK. Thanks for your reply, much appreciated. Look forward to seeing more content.
@alexanderhall8977
4 жыл бұрын
@@BIGBIRDSAIRSOFT I have another question! Sorry to bombard you. I bought an m105 spring for when I go on site outdoor as the one that came with the specna is too high powered. The one I bought seems to be alot longer than the ones supplied. Should I be looking for a specific specna arms spring? I knew this in the back of mind but I'm a bit impulsive.
@BIGBIRDSAIRSOFT
4 жыл бұрын
Alexander Hall no problem 👍 as long as it’s an AEG spring, it’ll be fine 🙂. Specna springs are about 120ish so the wire is a bit thicker. Pretty sure that means you can have a shorter spring.
@murkelusious5670
4 жыл бұрын
How did you fix the wobbly stock?
@BIGBIRDSAIRSOFT
4 жыл бұрын
Murk elusious check out the link at time 29:01 and I show you how to do it kzitem.info/news/bejne/zGeNzHZsqaJidZw
@sieg.eclips9398
4 жыл бұрын
Hi how did you fix the wobbly stock
@BIGBIRDSAIRSOFT
4 жыл бұрын
Sieg.eclips ! A small strip of Velcro on the top of the stock tube. You can see me do it in this video. kzitem.info/news/bejne/zGeNzHZsqaJidZw
@minivtec666
4 жыл бұрын
Great video as always been watching them since lockdown started. Just a quick question in regards to the hop rubber you say to use a maple leaf macron but what rating/colour?
@BIGBIRDSAIRSOFT
4 жыл бұрын
robert clark thanks for watching mate 👍 it’s a yellow 60 degree rubber and Omega nub.
@minivtec666
4 жыл бұрын
Thanks for the info I haven’t had chance to use it yet other than target shooting but want to help make it the best I can before I use it in anger. Do you think it’s worth stripping it down to check on the amount of grease used and checking the shimming (although I am not sure what you are meant to shim ) Maybe you could do a video 👍
@BIGBIRDSAIRSOFT
4 жыл бұрын
robert clark following the last three Specna Arms guns I have reviewed I would very much recommend stripping, greasing and re-shimming your gearbox. These guns really benefit from a few upgrades as even some of the advertised “pre-upgrades” don’t really make a huge difference. The best thing for these is a better cylinder, tight bore barrel hop rubber/nub and even a better quality hop unit. Maybe later on a HT motor. You will then have a pretty decent performer. 👍
@Perfonphrags
4 жыл бұрын
Awsome
@mathias2591
4 жыл бұрын
The light and sight ure using wher can i find them
@BIGBIRDSAIRSOFT
4 жыл бұрын
Mathias They’re actually just replicas off ebay
@mathias2591
4 жыл бұрын
Wanna share what to search on
@BIGBIRDSAIRSOFT
4 жыл бұрын
Mathias eBay, search night evolution for the light. Scout something. And eBay again, search red dod sight and take your pic. I’ve no idea where I got mine from, I just remember it was eBay a long time ago.
@mathias2591
4 жыл бұрын
Thanks 👌👍
@davidmartinez927
4 жыл бұрын
Hi! Awesome video, good job. Which 11.1 battery did you used? Because I want to use my SA E19 with a 11.1 but I'm afraid about double cycle, so what C rate would be ok, maybe 15C? Although, do you think that if I use a 7.4 25C the rate of fire and responsiveness could be near a 11.1? I think I prefer 11.1 with correct C rate but you're the master. Gearbox is shimmed and aligned. Thank you for your time!!
@michaelm2839
4 жыл бұрын
hang on im not being funny but how can you compare your 416 which has the expensive 150 quid to 200 quid gate titan against the gate x-asr?? ofc the titan will win but thats to me isnt fair and they both should have the exact same upgrades and etc before comparing and going against mate as i will say this isnt a v.s video more of a gate titan will always win video....... better off buying the 416 stock again or the edge type if there is one then do this vid if not then this vid was completely pointless
@BIGBIRDSAIRSOFT
4 жыл бұрын
Michael Mccreight the gate Titan is £80 direct from gate if you own the usb and £130 for the full kit. The fact is, the edge did well against it, as the XASR is only £20. As far as upgrades go, the Titan really is one of the smallest contributors to a guns performance and is by no means a guaranteed win. There is this mistake that people think the Titan is the holy grail of Airsoft guns, but it’s just one part. There is so much more performance to be had from hop units, barrels etc. The point of the comparison is to see it the edge is good value for money when compared to the upgraded gun. I fail to see the point of putting the same upgrades in them both and then comparing! They are both V2 gearboxes, similar lengths, both m4 hop units. It would be the same gun in a different outfit, completely pointless! As for the 416 edge 2 lol. Less said about that the better. At the end of the day it’s cheap vs expensive.
@michaelm2839
4 жыл бұрын
@@BIGBIRDSAIRSOFT right but gate titan is similar to the micro switch trigger board right? So would it be fair to upgrade the edge one to the same level no matter what verson gearbox it is cause so they both have a fair competition as they both have similar version 2 gearboxes but you upgraded 416 switch which will give it the more advantage over the x-asr. Its all about what type of gun the person wants so if you put a 416 which is good but has shit internals like I'm your 416 update vid as you state you had to upgrade the trigger switch and amongs other things cause you played with it why not do the same for the sa07 edge play with it till it brakes then do the exact same upgrades and then do a v.s or comparison vid so them people can go he then is 416 into a speed soft style gun instead of a hard hitting one or the sa07 edge into a hard hitting fps with little bit more rpm?
@BIGBIRDSAIRSOFT
4 жыл бұрын
Michael Mccreight no the Titan and a micro switch trigger have nothing in common. Most micro switch triggers are not a mosfet or programmable etc (except Jefferson) In fact, most micro switch triggers need a good mosfet fitting to get rid of the bounce. LiPo batteries destroy micro switches. The Titan has some good features, most of which will mean nothing to most AEG builds. The best thing it does is offer pre-cocking as do many inline mosfet units like the Warfet. The X-ASR with an 11.1v LiPo does very well comparatively for trigger response. I’m comparing a £170 AEG against a £200 AEG with £250 of upgrades to see if the standard £170 can get close in performance. It allows people to decide if upgrading is really worth it, as many people don’t like to. It’s nothing to do with being fair or unfair. There is no reason to change the trigger unit on the edge. The edge actually came out of the comparison well. I changed it in my 416 simply because I already had the Titan and I was doing a full upgrade. I have 5 guns fitted with Titans and they are great IF you need the functions, or if you are short on space for a mosfet and battery, but, I use the Warfet way more. It does the same thing. Everyone is going crazy for the Aster. Don’t get me wrong, it works well, but has less features than a Warfet which can be used on several guns by just buying the signal wires. I will probably upgrade the edge one day but it’ll just be the barrel, hop unit bearings and cylinder. With a good 11.1v it’ll be fine. I don’t think you’ll get a speedsoft build out of me dude, I’m not in to dsg builds etc.
@michaelm2839
4 жыл бұрын
@@BIGBIRDSAIRSOFT so what you telling people is that the x-asr is better cause it makes your gun shoot high rpm? Really how come then on the company website that it say it bypasses trigger contacts for little high rpm but it's main job is to stop debouncing, protects the trigger contact from burning out, motor jamming to destroy the mosfet and it protecting the gearbox from overheating and overcurreacting. Now what does a hard titan do?.... well it allows you to adjust your rpm and amongst or things which does the x-asr do that?? No it doesn't so your saying: yeah the SA-E07 for everyone as it gives you the same rpm as a gate titan which it fucking doesn't cause you can turn that titan full up to do over 40 rpm and the x-asr doesn't do that it's a mosfet that the main purpose of it is to protect the trigger contacts and battery from overhearing and overcurrenting
@BIGBIRDSAIRSOFT
4 жыл бұрын
Michael Mccreight lol no I don’t recall saying that at any point 😂😂. I said, it did well against the Titan when using an 11.1v considering the x-asr costs £20! I’m telling people that a gun costing £170 does well against an upgraded gun! SO, if you don’t want to mess with upgrades, you’ll be just fine! What I know anyway 👍
Пікірлер: 92