Nice and clear and not too long and drawn out. Thanks!
@technotesofhemant8338
11 ай бұрын
Welcome
@shazdin
2 жыл бұрын
@Hemant u did a very good job in such a short and crispy video you covered a wide topic. in our case we are using Satellite server how can we upgrade 7 machines to 8
@technotesofhemant8338
2 жыл бұрын
Well redhat has provided a complete procedure for hosts managed by Satellite. So there instead of providing an offline DVD you will have to enable foreman_plugin_leapp puppet module at satellite end.
@shatiswaranvigian9349
10 ай бұрын
Nice sharing Hemanth
@technotesofhemant8338
10 ай бұрын
Thank u very much
@iamseyishalom
4 ай бұрын
Very detailed and straight forward. Thank you!
@technotesofhemant8338
4 ай бұрын
Welcome
@uttamkumarkumar3171
Жыл бұрын
Sirji nice very useful informative well demonstrated session
@technotesofhemant8338
Жыл бұрын
Thank you very much for the support
@soniak3533
Жыл бұрын
Simply extraordinary
@technotesofhemant8338
Жыл бұрын
Thanku
@AmayraInMultiverse
2 жыл бұрын
@hemant bhai thank you so much ,
@technotesofhemant8338
2 жыл бұрын
Welcome brother
@shahidmehmood6718
6 ай бұрын
CentOS 7 to RHEL 8 is there any direct way?
@muntheralshaikh3527
10 ай бұрын
Thanks, the video is short and helpful 🎉👍
@technotesofhemant8338
10 ай бұрын
You are welcome
@saurabhbatra
2 ай бұрын
Great job, Just one question:- is this possible for centos as well or will only work with redhat subscription enabled version?
@technotesofhemant8338
2 ай бұрын
Well I never tested it for centos, still I believe if you migrate centos to redhat, this procedure should work over that as well.
@AbhishekSharma-ep9km
Ай бұрын
Very informative, thanks 👍
@vikasvikaszzy
11 ай бұрын
Thanks Hemant, it was a well explained, to the point video. Just wanted to know, how much time this entire process would take ?
@technotesofhemant8338
11 ай бұрын
Well we started with taking initial downtime of 3 hrs, later with confidence we are able to close under 45-60 mins
@RaviKumar-zn5cm
Жыл бұрын
Really excellent explanation thanks you so much bro......
@technotesofhemant8338
Жыл бұрын
You're most welcome
@amitupadhyay1821
Жыл бұрын
Thanks Hemant, looks great doc .. will check and let you know..
@MarkWood-qs7fg
Жыл бұрын
The way you explained this video made this upgrade super easy. Can you also put something from 8 to 9 as well?
@technotesofhemant8338
Жыл бұрын
Thanks and definitely we will bring next content
@user-yk6jt8hx1b
11 ай бұрын
Thanks fro the video, it's very helpful
@technotesofhemant8338
11 ай бұрын
Thank you
@PeaceDude84
7 ай бұрын
I did all the steps but I get the below error: Message: Unable to use yum successfully, any advice ?
@gameboyguggu
2 ай бұрын
Hi sir, Its very useful tutorial thank you. I am having a question, you are upgrading OS so what about the apps running on the server? is the app automatically adopt the new version or do we need to install application again?
@harispalegar6806
3 ай бұрын
Can you please make one Video upgrade RHEL 8.9 to 9.3 ?
@BlockchainGaming7
23 күн бұрын
How do you do this on offline system?
@Samcasm7
Жыл бұрын
I was trying without subscription, few months back I was able to migrate the 7.9 to 8.6 but when I try now I facing many issues , could you make a video on that , without subscription and how to remediate errors while doing it
@technotesofhemant8338
Жыл бұрын
The procedure might have changed, we will have a look and try making updated videos around that.
@Samcasm7
Жыл бұрын
@@technotesofhemant8338 that would be very helpful, I was trying this on azure rhel vm ( without subscription) , was following the same which mentioned on Redhat site but unfortunately, anyways thanks for reply will on the notification so that won't miss your videos thanks for helping many
@RoamandRelish
6 ай бұрын
Thanks for the video. I am getting downloaded to a html file and also i am not able to download directly via portal even though i have login. How do i get leapp-data4 file ?
@pummyfun
Жыл бұрын
what creds we would use to login cockpit?
@technotesofhemant8338
Жыл бұрын
Hello dear, You can try your usual system credentials.
@kanyanambaru1707
4 ай бұрын
Am getting error like " DNF execution failed with non zero exit code , container sysroot failed with error code 1" while rebooting the server after leapp upgrade. Help me to solve this issue
@technotesofhemant8338
4 ай бұрын
Can you share the complete logs
@kanyanambaru1707
4 ай бұрын
@@technotesofhemant8338 it is like 95% upgradation completed but after that it's going to " emergency mode with the above error ". I tried to come out from the emergency mode and reboot the VM and I observed one thing that kernel 4.18 available during reboot. I rebooted with kernel 4.18 and after booting done am unable to login the VM it's showing last login but not opening. And again I reboot with lowe kernel version am able to login. Here that DNF error didn't shown during pre-upgradation and upgradation.
@technotesofhemant8338
4 ай бұрын
Ok let me try once and get back to you on the same. Anything special with your rhel7 machine that i should keep in mind while doing testing?
@kanyanambaru1707
4 ай бұрын
@@technotesofhemant8338 this is one of the server used in my organisation, we are using proxy .
@SV-lw8jo
2 жыл бұрын
Do you know a way on accomplishing this for an offline without internet access RHEL 7?
@technotesofhemant8338
2 жыл бұрын
I believe yes, Download the ISO and provide updated binaries from there
@user-zo7nc9gm4m
11 ай бұрын
Thanks
@technotesofhemant8338
11 ай бұрын
Welcome
@jericorubion1612
Жыл бұрын
Hello is there a process to automate the OS upgrade?
@technotesofhemant8338
Жыл бұрын
Well I have not tested that, but i believe you can certainly do that
@abhilashh11
11 ай бұрын
🙌🏻🙏🏻
@wisereveryday9021
Жыл бұрын
Fantastic content
@technotesofhemant8338
Жыл бұрын
Glad you think so!
@kashefshaikh9666
Жыл бұрын
Good efforts thanks
@technotesofhemant8338
Жыл бұрын
So nice of you
@madhavinarani2159
9 ай бұрын
I have a plan to update my test satellite server.. how i can attach the test satellite server to production satellite server
@technotesofhemant8338
9 ай бұрын
Satellite works on concept of capsule, so i assume you can make your test satellite node capsure server of main satellite server
@madhavinarani2159
9 ай бұрын
@@technotesofhemant8338 thanks for the response.. how we can do that any doc you can refer me
@UnboxingTimeNow
Жыл бұрын
Hello, i have a question after downloading the zip file, i am unzipping it but i am getting error message "gzip: stdin: not in gzip format tar: Child returned status 1 tar: Error is not recoverable: exiting now. Please help me out
@technotesofhemant8338
Жыл бұрын
Thanks for your concern, appear that backend tar file on redhat end is not valid, I will check and update the links
@wajidarif820
Жыл бұрын
@@technotesofhemant8338 thank you please update and let me know.
@technotesofhemant8338
Жыл бұрын
Thanks @LearnToEarn & @Wajid Arif, for pointing this out. We tested that and noticed that the tar files are no where available on redhat portal and their download steps are no more required as latest version of leapp already having those steps. So we have updated the knowledge doc learningtechnix.wordpress.com/2021/10/18/linux-upgrading-from-redhat-7-to-8/ with the required steps and will update the video tutorial to highlight that section soon.
@arrey11
Жыл бұрын
Hello, if you are doing this offline(no internet access for subscription manager) do you have to setup both rhel7 and rhel7 repositories?
@technotesofhemant8338
Жыл бұрын
Though I haven't tried it offline, still yes you will be requiring RH7 iso/repo for initial system update and leapp. And later RH8 repo for actual upgrade.
@ninjaniflotstv9618
5 ай бұрын
how to go to web UI???
@technotesofhemant8338
5 ай бұрын
I you have cockpit enabled on redhat, you can login to webconsole provided by redhat
@UdayAdmin
5 ай бұрын
@hemanth can you upload rhel 8 to 9
@kohinoorteamyogeshchhabra8255
11 ай бұрын
Sir hmre pass web ka running server hai uske package ko update ni krna mai chta ho ki same package rhe aise ho jyega rhel mai update
@technotesofhemant8338
11 ай бұрын
Yes you can exclude package using yum command
@yogeshpuranik7780
2 жыл бұрын
I have my Linux 7.9 installed on AWS hardware, can we use this method to upgrade on AWS h/w ? or it doesn't support on that.
@technotesofhemant8338
2 жыл бұрын
By Aws hardware if I am understanding correctly your RHEL vm is running on aws infra, I do not see any issues other than network drivers compatibility maybe...
@vishutanuku311
Жыл бұрын
@hemant ---is it redhat 8 or 8.xx ? please confirm the latest version
@technotesofhemant8338
Жыл бұрын
Well 8.x actually pertaining to which repository you configure
@Nimitz_oceo
2 жыл бұрын
hi can you do an upgeade from 8 to 9 video?
@technotesofhemant8338
2 жыл бұрын
Hello Admiral, Noy yet as testing on it is still under construction
@LokeshMehndiratta-uv7wc
2 ай бұрын
Hi Hemant, I have an airgap environment where I need to upgrade from RHEL 7.9 to 8.9 without internet. Can you please guide me for the same? I'll share my email once you acknowledge this message.
@technotesofhemant8338
2 ай бұрын
As per my understanding you only need internet connection to provide RHEL8 packages, if same could be done using a satellite or an ISO leapp supports providing path of repository as well.
@vishutanuku311
Жыл бұрын
8.4 right ?
@TheBlackMamba_Studios
Жыл бұрын
How i can see the rh79.technix issues report? thanks!
Пікірлер: 82