I missed the live (watching now) but I have talked to people both via phone and via support who have been contacting us to put in new orders, upgrade existing orders and just saying great things about this show!! Garrett thanks for everything you do... not just for PwnCNC but for the CNC community!! It's the best group of people in the world and a place I definitely consider home!!!
@IDCWoodcraft
5 ай бұрын
ClintonPwnCNC, happy to have you here brother!
@roblehmann2378
5 ай бұрын
I'm sorry I missed the live show all so. Thank u for the video and yes please bring Daniel back and thank u.
@IDCWoodcraft
5 ай бұрын
roblehmann2378, you are so welcome my friend.
@markr3547
5 ай бұрын
Why does a VFD have to be used ? I have an open builds that has a black box 32 with an interface that shows spindle control. ?
@IDCWoodcraft
5 ай бұрын
A vfd converts single phase to 3 phase
@woodworkingDad64
5 ай бұрын
Great review! Is it possible to put all the links in the description from the chat?
@IDCWoodcraft
5 ай бұрын
marcuspedroza52, I am sorry brother but I dont think KZitem has that functionality quite just yet. Sorry I cant help you in that department.
@woodworkingDad64
5 ай бұрын
@@IDCWoodcraft no worries Joe Lazzara helped me with what I needed
@chrispelletier3661
5 ай бұрын
I’m sorry I was not able to join last night!
@IDCWoodcraft
5 ай бұрын
chrispelletier3661, catch you on the next one brother!
@andrewsutter1734
5 ай бұрын
Hey Garrett, sorry I missed the live viewing. Is it possible to install a spindle on a Bob's cnc Evo 5? I have the Makita trim router on there now.
@IDCWoodcraft
5 ай бұрын
Unfortunately the Bob's will not support the weight of the spindle
@andrewsutter1734
5 ай бұрын
@@IDCWoodcraft that's what I was worried about. I just caught a glimpse of the Altmill today.
@bubba6945
3 ай бұрын
Does your spindles and vfd adjust RPM as the feed rate of the machine changes during a 3d relief carve? My machine will automatically change feed rate during a 3d relief carve no matter what I have the feed rate set to. I've seen as low as 7ipm feed rate which changes chip load and is just wearing bits out prematurely because the router is still spinning at a high rpm
@IDCWoodcraft
3 ай бұрын
bubba6945, good question brother. Typically the spindle speed stays the same and you adjust your feedrate to suit the job you are doing if you are trying to change your settings on the fly. For your situation its best to start with the right feeds and speeds to start brother!
@bubba6945
3 ай бұрын
@@IDCWoodcraft it don't seem to matter what speeds I set my feed rate to. That's my point lol I can set it to 100ipm or 50 ipm it will change as it's making the pass. If the detail is nice and smooth it runs the IPM I set but once it comes to an area in the model that is raised it dips it will decrease IPM in its own I've seen it drop to 7ipm with a 120 imo feed rate set in my cam program which is just excessive wear on my tooling because the router is preset at the speed we set them to. I was hoping the spindle speed would follow the IPM of feed rate and ramp up n down based on the IPM the machine actually moves. If not the spindle has very little use for my application other than it's cool 😂 So on your long mill if you do a 3d relief carve and you set your feed rate to 100ipm it runs that IPM all through the carve? If so I'm buying one ASAP the Onefinity black box controller is configured so that it does as I've mentioned. There is no user adjustment. You basically set the max you want it to ever go and the controller automatically slows the feed rate down.
@LavinWoodworks
5 ай бұрын
Is the audio available anywhere else?
@IDCWoodcraft
5 ай бұрын
LavinWoodworks, I am sorry brother but not yet!
@johnhall3199
5 ай бұрын
Garrett has your email address been blocked as I tried to email you john
@IDCWoodcraft
5 ай бұрын
johnhall3199, try reaching out to garrett@idcwoodcraft.com brother! That is my email address.
Пікірлер: 21